Hypervelocity impact damage behavior of B4C/Al composite for MMOD shielding application
Source abstract
Abstract
In order to improve the survivability of in-orbit spacecraft against the hypervelocity impact (HVI) of space debris, the lightweight B4C/Al composite is fabricated by the pressureless presintering and Al infiltration in vacuum and applied as the bumper of Whipple shield configuration. The HVI tests ranging from 3 km/s to 6.5 km/s are carried out to assess the shield performance of B4C/Al bumper. The fitting line of the ballistic limit for the B4C/Al bumper is obtained, and its critical projectile size can be improved by about 20% in comparison to the conventional Al alloy Whipple shield configuration. Based on the damage features of bumper and rear wall, the B4C ceramic phase of B4C/Al composite is the key reason to break the projectile into smaller fragments or liquid droplets of debris cloud. The Al plastic phase with three-dimensional network enhances the toughness of B4C/Al composite bumper, which plays an important role in avoiding structural failure caused by shock waves. Hence, the impact kinetic energy of debris cloud is obviously dispersed, and the subsequent impact damages on real wall are alleviated accordingly. The primary investigation provided theoretical and technical instructions for the design and application of B4C/Al composite in MMOD shield configuration.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Energetic Materials and Combustion · Space Satellite Systems and Control
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Risks in space from orbiting debris10.1126/science.1121337 ↗
2. A history of meteoroid and orbital debris impacts on the space shuttle
3. Dynamical evolution of space debris in the vicinity of GNSS regions10.1016/j.actaastro.2018.02.001 ↗
4. An environmental estimation model for in-situ measurements of small space debris10.1016/j.asr.2018.04.042 ↗
5. Hypervelocity impacts and damage laws10.1016/S0273-1177(97)00027-6 ↗
6. Studies of hypervelocity impact phenomena as applied to the protection of spacecraft operating in the MMOD environment10.1016/j.proeng.2017.09.723 ↗
7. Christiansen · 2003
8. High velocity impact response of Kevlar-29/epoxy and 6061-T6 aluminum laminated panels10.1016/j.matdes.2012.06.034 ↗
9. Meteoroid and space travel
10. Performance of Whipple shields at impact velocities above 9 km/s10.1016/j.ijimpeng.2010.10.021 ↗
11. Hypervelocity impact testing of a metallic glass-stuffed Whipple shield10.1002/adem.201400518 ↗
12. Hypervelocity impact of TiB2-based composites as front bumpers for space shield applications10.1016/j.matdes.2016.02.126 ↗
13. Protecting spacecraft against orbital debris impact damage using composite materials10.1016/S1359-835X(00)00019-1 ↗
14. Ballistic impact performance of Kevlar-29 and Al2O3 powder/epoxy targets under high velocity impact10.1016/j.matdes.2011.08.045 ↗
15. Shielding performances of the designed hybrid laminates impacted by hypervelocity flyer10.1016/j.matdes.2013.05.050 ↗
16. Energy absorption efficiency of carbon fiber reinforced polymer laminates under high velocity impact10.1016/j.matdes.2013.01.046 ↗
17. Study of the shielding performance of a Whipple shield enhanced by Ti-Al-nylon impedance-graded materials10.1016/j.ijimpeng.2018.08.005 ↗
18. Hypervelocity impact on flexible curable composites and pure fabric layer bumpers for inflatable space structures10.1016/j.compstruct.2017.06.035 ↗
19. Dynamic deformation and fracture of mullite (3Al2O3·2SiO2) ceramics under hypervelocity impact10.1016/j.ijimpeng.2008.07.018 ↗
20. Sacrificial bumpers with high-impedance ceramic coating for orbital debris shielding: a preliminary experimental and numerical study10.1016/j.ijimpeng.2018.05.004 ↗
21. Study of static and dynamic behavior of TiB2-B4C composite10.1016/j.matdes.2015.12.123 ↗
22. Enhanced fracture toughness of boron carbide from microalloying and nanotwinning10.1016/j.scriptamat.2018.11.035 ↗
23. Processing of complex-shaped collimators made via binder jet additive manufacturing of B4C and pressureless melt infiltration of Al10.1016/j.matdes.2019.107956 ↗
24. Microstructure and mechanical properties of a three-layer B4C/Al-B4C/TiB2-B4C composite10.1016/j.matdes.2012.10.035 ↗
25. Analysis of morphology and microstructure of B4C/2024Al composites after 7.62 mm ballistic impact10.1016/j.matdes.2014.06.042 ↗
26. IADC WG3 Members · 2014
27. A stuffed Whipple shield for the Chinese space station10.1016/j.ijimpeng.2019.05.018 ↗
28. Preliminary study on shielding performance of wood stuffed shield10.1016/j.ijimpeng.2015.12.006 ↗
29. Design and performance equations for advanced meteoroid and debris shields10.1016/0734-743X(93)90016-Z ↗
30. A ballistic limit analysis programme for shielding against micrometeoroids and orbital debris10.1016/j.actaastro.2011.04.012 ↗
31. Analytic ballistic performance model of Whipple shields10.1016/j.proeng.2015.04.037 ↗
32. Optical fragment tracking in hypervelocity impact experiments10.1016/j.actaastro.2018.11.036 ↗
33. Whipple shield performance in the shatter regime10.1016/j.ijimpeng.2010.10.022 ↗
34. Piekutowski · 1996
35. Research on Damages Evaluation Method With Multi-Objective Feature Extraction Optimization Scheme for M/OD Impact Risk Assessment10.1109/ACCESS.2019.2930114 ↗