journal article·2021-08Open access

Atomic-scale investigation of creep behavior and deformation mechanism in nanocrystalline FeCrAl alloys

Huan Yao, Tianzhou Ye, Wenshan Yu, Pengfei Wang, Junmei Wu, Yingwei Wu, Ping Chen

Materials & Design· Volume 206

Abstract

FeCrAl alloys have been proposed as nuclear fuel cladding materials in hope of offering great potential in accident tolerance for light water reactors. However, only a limited amount of data has been published on their creep properties. This work aims to provide an atomic-scale insight into the creep behavior and deformation mechanism for nanocrystalline FeCrAl alloys, using molecular dynamics method. Both primary and steady state creeps are observed in all creep curves, and tertiary creep occurs at stresses above 2.5 GPa in the time period of the present simulation. As stress increases, the creep mechanism transits from Coble creep to grain boundary sliding, and then to the synergy of grain boundary sliding and dislocation creep. The turning points are about 0.8 GPa and 1.8 GPa, respectively. The dislocation motions are controlled by viscous gliding at low temperature, and then by climbing when temperature exceeds 1000 K. Moreover, the grain size and alloy composition have little impact on the transition of creep mechanism within the present research scope. The proposed creep mechanisms are further analyzed not only from the comparison between activation energies for diffusion and creep, but also from the representative atomic snapshots.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Nuclear Materials and Properties · High Temperature Alloys and Creep · Fusion materials and technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (69)

Show source-provided references
1. Advanced oxidation-resistant iron-based alloys for LWR fuel cladding10.1016/j.jnucmat.2013.06.041 ↗
2. Accident tolerant fuels for LWRs: A perspective10.1016/j.jnucmat.2013.12.005 ↗
3. A review on thermohydraulic and mechanical-physical properties of SiC, FeCrAl and Ti3SiC2 for ATF cladding10.1016/j.net.2019.07.030 ↗
4. Terrani, K., A., Snead, L., L., Yang, Y., Pint, B., Development and property evaluation of nuclear grade wrought FeCrAl fuel cladding for light water reactors, J. Nucl. Mater. (2015). https://doi.org/10.1016/j.jnucmat.2015.10.019.10.1016/j.jnucmat.2015.10.019 ↗
5. Terrani, Kurt, A., Accident tolerant fuel cladding development: Promise, status, and challenges, J. Nucl. Mater. (2018). https://doi.org/10.1016/j.jnucmat.2017.12.043.10.1016/j.jnucmat.2017.12.043 ↗
6. Development of low-Cr ODS FeCrAl alloys for accident-tolerant fuel cladding10.1016/j.jnucmat.2017.12.035 ↗
7. Cladding burst behavior of Fe-based alloys under LOCA10.1016/j.jnucmat.2015.12.018 ↗
8. Preliminary assessment of accident-tolerant fuels on LWR performance during normal operation and under DB and BDB accident conditions10.1016/j.jnucmat.2013.09.052 ↗
9. Robb, R. Kevin, Analysis of the FeCrAl Accident Tolerant Fuel Concept Benefits during BWR Station Blackout Accidents, in: Chicago, IL, USA, 2015. https://www.osti.gov/biblio/1213328.
10. An investigation of FeCrAl cladding behavior under normal operating and loss of coolant conditions10.1016/j.jnucmat.2017.04.039 ↗
11. T. C, S. M, S.H. J, Protective coatings on zirconium-based alloys as accident-tolerant fuel (ATF) claddings, Corros. Rev. 35 (2017). https://doi.org/10.1515/corrrev-2017-0010.10.1515/corrrev-2017-0010 ↗
12. Experimental evaluation of cold spray FeCrAl alloys coated zirconium-alloy for potential accident tolerant fuel cladding
13. Versatile Oxide Films Protect FeCrAl Alloys Under Normal Operation and Accident Conditions in Light Water Power Reactors10.1007/s11837-017-2705-z ↗
14. The Influence of Alloying Elements on the Development and Maintenance of Protective Scales10.1007/BF01046725 ↗
15. Influence of composition and heating schedules on compatibility of FeCrAl alloys with high-temperature steam10.1016/j.jnucmat.2018.09.026 ↗
16. Grain boundary sliding associated with low strain rate at 1000°C in recrystallized ODS ferritic steel10.1016/j.nme.2016.08.006 ↗
17. A first report on deformation-mechanism maps10.1016/0001-6160(72)90082-X ↗
18. High temperature deformation mechanism of 15CrODS ferritic steels at cold-rolled and recrystallized conditions10.1016/j.jnucmat.2015.07.049 ↗
19. Cooperative grain boundary sliding in creep deformation of FeCrAl-ODS steels at high temperature and low strain rate10.1016/j.jnucmat.2018.04.050 ↗
20. Creep of dispersion strengthened materials: A critical assessment
21. Creep behavior of commercial FeCrAl foils: Beneficial and detrimental effects of oxidation10.1016/j.msea.2012.03.031 ↗
22. P. Bérard, J.D. Bartout, M. Reytier, M. Lefrançois, J. Besson, Viscoplastic behavior of a FeCrAl alloy for high temperature steam electrolysis (HTSE) sealing applications between 700 °C and 900 °C, Mater. Sci. Eng. A. 528 (n.d.) 4092–4097. https://doi.org/10.1016/j.msea.2011.01.050.10.1016/j.msea.2011.01.050 ↗
23. Nanostructure Science and Technology Bulk Behavior of Nanostructured Materials
24. Roco MC, W. RS, A. P, Nanotechnology research directions :, Kluwer Academic Publishers, n.d.
25. Transition of creep mechanism in nanocrystalline metals
26. Grain Size Dependence of Creep in Nanocrystalline Copper by Molecular Dynamics10.2320/matertrans.MD201122 ↗
27. Molecular dynamics study on the grain size, temperature, and stress dependence of creep behavior in nanocrystalline nickel10.1007/s10853-016-0506-3 ↗
28. Nano-scale simulation based study of creep behavior of bimodal nanocrystalline face centered cubic metal10.1007/s00894-017-3481-y ↗
29. Healing mechanism of nanocrack in nanocrystalline metals during creep process10.1007/s00339-017-0760-5 ↗
30. A. JC, F. Liang, A. KS, H.C. Jing, Creep behaviors of surface-modified silicon: A molecular dynamics study, Comput. Mater. Sci. 176 (n.d.). https://doi.org/10.1016/j.commatsci.2019.109494.10.1016/j.commatsci.2019.109494 ↗
31. Effect of Zr addition on creep properties of ultra-fine grained nanocrystalline Ni studied by molecular dynamics simulations10.1016/j.commatsci.2016.10.013 ↗
32. Zr segregation in Ni–Zr alloy: implication on deformation mechanism during shear loading and bending creep10.1007/s10853-020-04411-1 ↗
33. Atomic-scale investigation of creep behavior in nanocrystalline Mg and Mg-Y alloys10.1016/j.actamat.2015.07.068 ↗
34. Molecular Dynamics Simulation on Creep Behavior of Nanocrystalline TiAl Alloy10.3390/nano10091693 ↗
35. Structural evaluation and deformation features of interface of joint between nano-crystalline Fe-Ni-Cr alloy and nano-crystalline Ni during creep process10.1016/j.matdes.2016.06.086 ↗
36. Deformation of nanocrystalline materials by molecular-dynamics simulation: relationship to experiments?10.1016/j.actamat.2004.08.045 ↗
37. Molecular-Dynamics Simulation of Grain-Boundary Diffusion Creep10.1023/A:1008664218857 ↗
38. Grain-boundary diffusion creep in nanocrystalline palladium by molecular-dynamics simulation10.1016/S1359-6454(01)00329-9 ↗
39. Deformation-mechanism map for nanocrystalline metals by molecular-dynamics simulation10.1038/nmat1035 ↗
40. Plastic behavior of nanophase Ni: A molecular dynamics computer simulation10.1063/1.119785 ↗
41. Plastic behavior of nanophase metals studied by molecular dynamics10.1103/PhysRevB.58.11246 ↗
42. Molecular dynamics simulation of micro-mechanical deformations in polycrystalline copper with bimodal structures10.1016/j.matlet.2016.07.122 ↗
43. Aluminum and vacancies in α-iron: Dissolution, diffusion, and clustering10.1103/PhysRevB.81.174101 ↗
44. Microstructure and texture evolution and ring-tensile properties of recrystallized FeCrAl ODS cladding tubes
45. Structural modeling of nanocrystalline materials10.1016/0927-0256(94)00072-K ↗
46. Z.L.A. B, Q.H. A, Y.G. A, J.L. A, D.S. A, Y.Z. A, Q.H. A, H.D. D, F.G. E, B.S. C, Development of interatomic potentials for Fe-Cr-Al alloy with the particle swarm optimization method, J. Alloys Compd. 780 (2019) 881–887. https://doi.org/10.1016/j.jallcom.2018.11.079.10.1016/j.jallcom.2018.11.079 ↗
47. Development of an interatomic potential for phosphorus impurities in α-iron10.1088/0953-8984/16/27/003 ↗
48. Two-band modeling of {alpha}-prime phase formation in Fe-Cr10.1103/PhysRevB.72.214119 ↗
49. Fast Parallel Algorithms for Short-Range Molecular Dynamics10.1006/jcph.1995.1039 ↗
50. Systematic analysis of local atomic structure combined with 3D computer graphics10.1016/0927-0256(94)90109-0 ↗
51. Visualization and analysis of atomistic simulation data with OVITO–the Open Visualization Tool10.1088/0965-0393/18/1/015012 ↗
52. Investigation of the effect of pressure on some physical parameters and thermoelastic phase transformation of NiAl alloy - ScienceDirect10.1016/j.ijsolstr.2008.01.027 ↗
53. Experimental Correlations for High-Temperature Creep
54. Nabarro FRN, Report of a Conference on the Strength of Solids, Phys. Soc. 75 (1948). https://doi.org/10.1038/163117b0.10.1038/163117b0 ↗
55. Diffusional Viscosity of a Polycrystalline Solid10.1063/1.1699681 ↗
56. A Model for Boundary Diffusion Controlled Creep in Polycrystalline Materials10.1063/1.1702656 ↗
57. Grain boundary sliding and deformation mechanism maps10.1016/0025-5416(79)90060-0 ↗
58. Gifkins RC, Diffusional Creep Mechanisms, J Am Ceram Soc. (1968) 69–72. https://doi.org/10.1111/j.1151-2916.1968.tb11838.x.10.1111/j.1151-2916.1968.tb11838.x ↗
59. Theory of Steady-State Creep Based on Dislocation Climb10.1063/1.1721875 ↗
60. W. J, Steady-State creep of crystals, J Appl Phys. (1957) 1185–1189. https://doi.org/10.1063/1.1722604.10.1063/1.1722604 ↗
61. Steady-State Creep through Dislocation Climb10.1063/1.1722747 ↗
62. Blum W, Z. XH, A simple dislocation model of deformation resistance of ultrafine-grained materials explaining Hall-Petch strengthening and enhanced strain rate sensitivity, Acta Mater. (2009) 1966–1974. https://doi.org/10.1016/j.actamat.2008.12.041.10.1016/j.actamat.2008.12.041 ↗
63. Nanomechanics of Hall-Petch relationship in nanocrystalline materials10.1016/j.pmatsci.2009.03.008 ↗
64. J.C.M. Li, Petch relation and grain boundary sources, (1963).
65. Molecular-dynamics simulation of the heat capacity for nickel and copper clusters: Shape and size effects10.1134/S1063776112010116 ↗
66. Development of a tight-binding model for Cu and its application to a Cu-heat-sink under irradiation10.1007/s10853-015-9097-7 ↗
67. Self-diffusion in high-angle fcc metal grain boundaries by molecular dynamics simulation10.1080/01418619908212021 ↗
68. Structure of grain boundaries in nanocrystalline palladium by molecular dynamics simulation10.1016/S1359-6462(99)00142-6 ↗
69. Atomistic Simulation of Curvature Driven Grain Boundary Migration