Flexible design of cellular Al2TiO5 and Al2TiO5-Al2O3 composite monoliths by reactive firing
Source abstract
Abstract
Abstract Cellular Al2TiO5 and Al2TiO5 – Al2O3 composite ceramics were obtained by emulsification of liquid paraffin in aqueous suspensions of mixed TiO2 + Al2O3 powders, with subsequent burnout of the organic phase and 2-step reactive firing at high temperatures. The reactants ratio and paraffin to suspension volume ratio were used as primary parameters to control the phase composition and relevant microstructural features, while firing conditions were also adjusted for greater flexibility in designing Al2TiO5-based cellular materials. Taguchi experimental planning was used to assess the relevant impacts of 2-step firing parameters on phase composition and porosity, characterized by detailed XRD/SEM/EDS studies. The results emphasized the positive effects of Al2O3 excess in Al2TiO5 – Al2O3 composite ceramics on stabilization of the Al2TiO5 phase and also for flexible design of cellular materials with controlled porosity and phase distributions. Analysis of correlation matrixes identified the 2-step firing parameters with greatest impact on the porosity and phase composition, and these trends were confirmed by multivariate linear regression. The observed trends indicated significant differences in reactivity and densification mechanisms between compositions with nominal Al2TiO5 stoichiometry and composite materials. These differences were most obvious for samples with significant residual fractions of unreacted titania.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Nuclear materials and radiation effects
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Aluminium titanate - a literature review. Part 1. Microcracking phenomena
2. Thermal stabilization of aluminium titanate and properties of aluminium titanate solid solutions10.1007/BF02387756 ↗
3. A comparison study of tialite ceramics doped with various materials and tialite-mullite composites: microstructural, thermal and mechanical properties10.1016/j.jeurceramsoc.2004.03.024 ↗
4. Enhancing the thermal shock resistance of alumina-rich magnesium aluminate spinel refractories by an aluminum titanate phase10.1016/j.ceramint.2016.06.037 ↗
5. Effect of grain boundary cracks on the corrosion behaviour of aluminium titanate ceramics in a molten aluminium alloy10.1016/j.corsci.2011.09.002 ↗
6. The application of Al2TiO5 at the TiO2/perovskite interface to decrease carrier losses in solar cells10.1039/C6TA10468A ↗
7. Thermal stability of Al2TiO5 ceramics for new diesel particulate filter applications-a literature review
8. Reactive sintering and microstructure of uniform, openly porous Al2TiO510.1016/j.jascer.2013.05.004 ↗
9. Ceramic membranes on the basis of aluminium titanate
10. Preparation of monolithic aluminium titanate with well-defined macropores via a sol-gel process accompanied by phase separation10.1016/j.matdes.2015.06.055 ↗
11. Structure studies on Al2TiO5 at room temperature and at 600°C10.1107/S0567740872003681 ↗
12. Diffraction, structure and phase stability studies on aluminium titanate10.1016/j.jeurceramsoc.2008.05.037 ↗
13. Reaction sintering of aluminium titanate: I-effect of MgO addition10.1016/0955-2219(94)90018-3 ↗
14. Reformation of phase composition in decomposed aluminium titanate10.1016/j.matchemphys.2008.03.017 ↗
15. Thermodynamic description of the Ti-Al-O system based on experimental data
16. Effect of adding Cr2O3/Fe2O3 on aluminum titanate properties10.1007/s11148-015-9844-y ↗
17. Sintering behavior of Al2TiO5 base ceramics and their thermal properties10.1016/S0272-8842(98)00083-2 ↗
18. Microstructure and mechanical properties of MgO-doped Al2TiO5 prepared by reactive sintering
19. Thermal expansion and mechanical properties of self-reinforced aluminum titanate ceramics with elongated grains10.1016/j.jeurceramsoc.2016.11.037 ↗
20. Formation of aluminum titanate with small additions of MgO and SiO210.1590/1980-5373-MR-2015-0498 ↗
21. Fracture behaviour of microcrack-free alumina-aluminium titanate ceramics with second phase nanoparticles at alumina grain boundaries10.1016/j.jeurceramsoc.2008.01.017 ↗
22. Design and processing of Al2O3-Al2TiO5 layered structures10.1016/j.jeurceramsoc.2004.05.001 ↗
23. Enhanced properties of alumina-aluminium titanate composites obtained by spark plasma reaction-sintering of slip cast green bodies10.1016/j.compositesb.2012.11.010 ↗
24. A comparison study on the R-curve behavior of alumina/aluminum titanate composites prepared with different TiO2 powders10.1016/j.tafmec.2016.01.005 ↗
25. Aluminum titanate formation by solid state reaction of coarse Al2O3 and TiO2 powders10.1111/j.1151-2916.1988.tb05755.x ↗
26. Influence of powder precursors on reaction sintering of Al2TiO510.1016/j.scriptamat.2004.01.034 ↗
27. Preparation of porous Al2TiO5 ceramics reinforced by in situ formation of mullite whiskers10.1016/j.matdes.2012.12.028 ↗
28. Microstructural control of porous Al2TiO5 by using various starches as pore-forming agents10.2109/jcersj2.122.565 ↗
29. Cellular ceramics processed by paraffin emulsified suspensions with collagen consolidation10.1016/j.matlet.2013.02.020 ↗
30. Effects of processing parameters on cellular ceramics obtained by paraffin emulsified suspensions10.1016/j.ceramint.2014.01.117 ↗
31. Cellular MgAl2O4 spinels prepared by reactive sintering of emulsified suspensions10.1016/j.matlet.2015.10.169 ↗
32. Cellular ceramics by gelatin gelcasting of emulsified suspensions with sunflower oil10.1016/j.jeurceramsoc.2015.03.008 ↗
33. Quality engineering: the Taguchi method
34. Harris · 1988 · 5 (1989) · 249
35. Sintering dense nanocrystalline ceramics without final-stage grain growth10.1038/35004548 ↗
36. Two-step sintering of oxide ceramics with various crystal structures10.1016/j.jeurceramsoc.2009.06.008 ↗
37. Monoliths open the door to key growth sectors
38. Experimental characterization of the transport phenomena, adsorption, and elution in a protein A affinity monolithic medium10.1016/j.chroma.2015.06.045 ↗
39. Review of the anatase to rutile phase transformation10.1007/s10853-010-5113-0 ↗
40. Electronic structure of layered ferroelectric high-k titanate Pr2Ti2O710.1016/j.jssc.2012.02.033 ↗
41. Electronic structure of layered ferroelectric high-k titanate La2Ti2O710.1088/0022-3727/42/3/035305 ↗
42. RIR-measurement and use in quantitative XRD10.1017/S0885715600013257 ↗
43. Aluminium titanate formation by solid state reaction of Al2O3 and TiO2 single crystals10.1007/BF00575408 ↗
44. Phase evolution and stability of aluminium titanate prepared by solid-state route: effect of two different particle size of Al2O310.1080/0371750X.2016.1193446 ↗
45. Introduction to the composite and its toughening mechanisms
46. Defect formation in β-Al₂TiO₅ and its influence on structure stability10.1007/BF01154705 ↗
47. The influence of composition, cooling rate and atmosphere on the synthesis and thermal stability of aluminum titanate10.1016/j.mseb.2008.12.002 ↗