journal article·2022-09Open access

Analyzing time series of serrated flow and the dependence on structural heterogeneity in Al-Mg-Sc alloy

J. Xie, X.P. Chen, Y. Cao, G.J. Huang, Q. Liu

Materials & Design· Volume 221

Abstract

Friction stir processing was applied to Al-Mg-Sc alloy, improving the mechanical properties and causing the serrated heterogeneity due to structural fluctuations in stirred zone (SZ). We found that the serrated behavior can be dominated by microstructure, not necessarily initiated under the intervention of temperature and strain rate, which stimulated the exploration of the dependence between structural heterogeneity and serrated heterogeneity. The time series of strain and strain rate were used to explain the formation and transformation of Portevin-Le Chatelier types in serrated heterogeneity. Since the time series of strain rate possessed intense periodicity and the peaks were at similar levels, serrated flow was inclined to Type A. Once the periodicity was broke or/and the peaks sharply increased, it would induce the failure of Type A and promote the transformation to the Type B with discontinuous propagation. In addition, we found that the serrated heterogeneity decreased with the increase of texture strength, while the increase of precipitated heterogeneity would strengthen serrated heterogeneity. Ultimately, the dependence between structural heterogeneity and serrated heterogeneity was discussed, which is beneficial to understand the nature of the material within SZ and the uniformity of processing area.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Advanced Welding Techniques Analysis · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Developing a high-strength Al-Mg-Si-Sc-Zr alloy for selective laser melting: Crack-inhibiting and multiple strengthening mechanisms10.1016/j.actamat.2020.03.060 ↗
2. Al3(Sc, Zr)-based precipitates in Al–Mg alloy: Effect of severe deformation10.1016/j.actamat.2016.10.064 ↗
3. Coarsening kinetics of nanoscale Al3Sc precipitates in an Al–Mg–Sc alloy10.1016/j.actamat.2005.05.025 ↗
4. Influence of the degree of scandium supersaturation on the precipitation kinetics of rapidly solidified Al-Mg-Sc-Zr alloys10.1016/j.actamat.2016.07.001 ↗
5. Diffusion-defining atomic-scale spinodal decomposition within nanoprecipitates10.1038/s41563-018-0209-z ↗
6. Coarsening of Al3Sc precipitates in Al-Mg-Sc alloys10.1016/j.jallcom.2018.12.133 ↗
7. Recent advances in friction stir welding/processing of aluminum alloys: microstructural evolution and mechanical properties10.1080/10408436.2017.1358145 ↗
8. Friction stir welding and processing10.1016/j.mser.2005.07.001 ↗
9. Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution10.1016/j.pmatsci.2020.100752 ↗
10. Integrated modeling of friction stir welding of 6xxx series Al alloys: Process, microstructure and properties10.1016/j.pmatsci.2011.05.003 ↗
11. Microstructure evolution of annealed 7075 aluminum alloy and its influence on room-temperature plasticity10.1016/j.matdes.2020.109192 ↗
12. The mechanism of rotational and non-rotational shoulder affecting the microstructure and mechanical properties of Al-Mg-Si alloy friction stir welded joint10.1016/j.matdes.2020.108729 ↗
13. Interaction of recrystallization and precipitation: The effect of Al3Sc on the recrystallization behaviour of deformed aluminium10.1016/S1359-6454(03)00002-8 ↗
14. Heteroatom Modification Enhances Corrosion Durability in High-Mechanical-Performance Graphene-Reinforced Aluminum Matrix Composites10.1002/advs.202104464 ↗
15. A review of dynamic recrystallization phenomena in metallic materials10.1016/j.matdes.2016.09.012 ↗
16. Precipitate stability and recrystallisation in the weld nuggets of friction stir welded Al–Mg–Si and Al–Mg–Sc alloys10.1016/j.msea.2008.02.006 ↗
17. The hidden order behind jerky flow10.1016/S1359-6454(02)00099-X ↗
18. Serration and noise behaviors in materials10.1016/j.pmatsci.2017.06.004 ↗
19. On the influence of precipitation on the Portevin-Le Chatelier effect10.1016/0956-7151(94)00334-E ↗
20. Effect of Grain Refinement on Jerky Flow in an Al-Mg-Sc Alloy10.1007/s11661-016-3381-2 ↗
21. Grain refinement in an Al-Mg-Sc alloy: Equal channel angular pressing versus friction-stir processing10.1016/j.msea.2016.08.021 ↗
22. Characterisation of microstructure and texture in friction stir welded joints of 5754 and 5182 aluminium alloy sheets10.1179/026708301101509674 ↗
23. Heterogeneous structure-induced strength-ductility synergy by partial recrystallization during friction stir welding of a high-entropy alloy10.1016/j.matdes.2020.109238 ↗
24. Multifractal analysis of the Portevin–Le Chatelier effect: General approach and application to AlMg and AlMg/Al2O3 alloys10.1016/j.actamat.2005.03.042 ↗
25. Macroscopic and microscopic characterizations of Portevin-LeChatelier effect in austenitic stainless steel using high-temperature digital image correlation analysis10.1016/j.actamat.2020.116560 ↗
26. Activation energy for serrated flow in type 316L(N) austenitic stainless steel10.1016/j.msea.2014.02.083 ↗
27. Quantitated heterogeneity of serrated flow and the microstructural analysisin stirred zone10.1016/j.msea.2022.143414 ↗
28. Portevin-Le Châtelier effect in wrought Ni-based superalloys: Experiments and mechanisms10.1016/j.jmst.2020.03.023 ↗
29. Grain structure formation during friction stir welding observed by the ‘stop action technique’10.1016/j.actamat.2005.03.044 ↗
30. Recrystallization mechanisms in 5251 H14 and 5251 O aluminum friction stir welds10.1016/j.msea.2006.09.036 ↗
31. Effects of stored strain energy on restoration mechanisms and texture components in an aluminum–magnesium alloy prepared by friction stir processing10.1016/j.msea.2015.07.001 ↗
32. Effect of Welding Temperature on Microstructure of Friction-stir Welded Aluminum Alloy 105010.1007/s11661-014-2651-0 ↗
33. Development of grain structure during friction stir welding10.1016/j.scriptamat.2004.04.017 ↗
34. Entire Process Simulation of Friction Stir Welding — Part 1: Experiments and Simulation10.29391/2022.101.011 ↗
35. Entire-Process Simulation of Friction Stir Welding — Part 2: Implementation of Neural Networks10.29391/2022.101.013 ↗
36. Grain structure evolution during friction-stir welding of AZ31 magnesium alloy10.1016/j.actamat.2009.07.041 ↗
37. A review of numerical analysis of friction stir welding10.1016/j.pmatsci.2014.03.003 ↗
38. Microstructure evolution during friction-stir welding of AZ31 magnesium alloy10.1016/j.actamat.2015.08.066 ↗
39. Microstructure and mechanical properties of severely deformed Al-Mg-Sc-Zr alloy and their evolution during annealing10.1016/j.msea.2018.12.063 ↗
40. Microstructure evolution and strengthening mechanisms in friction-stir welded Al–Mg–Sc alloy10.1016/j.msea.2019.138540 ↗