Modeling the mechanical properties of polypropylene/lignin/flax hybrid composites
Source abstract
Abstract
Fig 1 Graphical abstract of the manuscript. • Hybrid composites containing 50–80 wt% natural reinforcements can be prepared to improve polypropylene’s carbon footprint significantly. • The preparation of hybrid composites is beneficial as flax has a more significant reinforcing effect than lignin. • Simple models allow the identification and verification of possible synergism or antagonism in hybrid materials. • Lignin and flax act independently in hybrid polypropylene composites; their effect is additive, and synergism could not be detected. Flax and lignin were used to prepare hybrid polypropylene composites. The lignin contents were varied between 0 and 50 vol%, while the amounts of flax used were 0, 10, 20, and 30 vol%. The components were homogenized in a twin-screw compounder and then injection molded into tensile bars. Tensile and impact tests were used to characterize the mechanical properties, and the structures were studied by scanning electron microscopy. The simultaneous effects of reinforcement on composite properties were analyzed quantitatively with models to establish synergies or a coupling effect of lignin. The agreement between measured results and predicted values proved to be excellent. The models were also successfully applied to data published in the literature. Lignin increased the strength from 10 to 20 MPa, and a smaller amount of added flax increased the strength up to 30 MPa. Modeling also established the stronger reinforcing effect of flax; the corresponding B parameters for lignin and flax were 3.7 and 5.9 for strength and 1.0 and 5.2 for impact resistance, respectively. The two reinforcements acted independently; their effects were additive, and synergism could not be detected. Only quantitative analysis and modeling offer reliable information about the effect of components in hybrid materials.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Polymer Nanocomposites and Properties · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (80)
Show source-provided references
1. J. Bentham, Appliances, in: J. Karger-Kocsis (Ed.), Polypropyl. An A-Z Ref., Springer, Dordrecht, 1999: pp. 29–37. https://doi.org/10.1007/978-94-011-4421-6_5.10.1007/978-94-011-4421-6_5 ↗
2. C. Maier, T. Calafut, Applications, in: Polypropylene, William Andrew Publishing, Norwich, 1998: pp. 87–107. doi:10.1016/B978-188420758-7.50016-3.10.1016/B978-188420758-7.50016-3 ↗
3. H. Karian, ed., Handbook of Polypropylene and Polypropylene Composites, Revised and Expanded, 2nd ed., CRC Press, Boca Raton, 2003. https://doi.org/10.1201/9780203911808.10.1201/9780203911808 ↗
4. J. Karger-Kocsis, ed., Polypropylene Structure, Blends and Composites; Volume 3 Composites, 1st ed., Springer, Dordrecht, 1995. https://doi.org/10.1007/978-94-011-0523-1.10.1007/978-94-011-0523-1 ↗
5. C. Maier, T. Calafut, Fillers and reinforcements, in: Polypropylene, William Andrew Publishing, Norwich, 1998: pp. 49–56. https://doi.org/10.1016/B978-188420758-7.50009-6..10.1016/B978-188420758-7.50009-6 ↗
6. Structure and properties of polypropylene-elastomer blends
7. Commercial Polymer Blends
8. Polypropylene blends with elastomers
9. Tolinski · 2015
10. Recent advances in the application of natural fiber based composites10.1002/mame.201000095 ↗
11. Natural fiber composites: review of recent automotive trends
12. Natural Fiber Composites in Automotive Applications
13. Biomimetic approaches towards lightweight composite structures for car interior parts10.1016/j.matdes.2021.110281 ↗
14. About making lignin great again—Some lessons from the past10.3389/fchem.2019.00565 ↗
15. Correlations among miscibility, structure, and properties in thermoplastic polymer/lignin blends10.1021/acssuschemeng.8b02989 ↗
16. Towards lignin derived thermoplastic polymers10.1016/j.ijbiomac.2020.09.173 ↗
17. Valorization of lignin in polymer and composite systems for advanced engineering applications – A review10.1016/j.ijbiomac.2019.03.069 ↗
18. Effect of fiber attrition, particle characteristics and interfacial adhesion on the properties of PP/sugarcane bagasse fiber composites10.1016/j.polymertesting.2021.107189 ↗
19. Effect of various organic fibers on the stiffness, strength and impact resistance of polypropylene; a comparison10.1002/pi.6105 ↗
20. Particulate Filled Polypropylene: Structure and Properties
21. Structural biomaterials engineered from lignocellulosic agricultural waste10.1002/app.50617 ↗
22. Tensile and impact properties of three-component PP/wood/elastomer composites10.3144/expresspolymlett.2012.25 ↗
23. Improvement of the impact resistance of natural fiber–reinforced polypropylene composites through hybridization10.1002/pat.5280 ↗
24. Crystallization and mechanical properties of basalt fiber-reinforced polypropylene composites with different elastomers10.1007/s10973-018-7509-z ↗
25. Mechanical properties and morphology of polypropylene composites. III. Short glass fiber reinforced elastomer modified polypropylene10.1002/pc.750090406 ↗
26. Synergistic toughening effects of grafting modification and elastomer-olefin block copolymer addition on the fracture resistance of wood particle/polypropylene/elastomer composites10.1016/j.matdes.2019.107918 ↗
27. Synergic effect of two inorganic fillers on the mechanical and thermal properties of hybrid polypropylene composites10.4067/S0717-97072014000200015 ↗
28. High specific strength hybrid polypropylene composites using carbon fibre and hollow glass microspheres: development, characterization and comparison with empirical models10.1016/j.compositesb.2019.05.086 ↗
29. Physical and mechanical properties of polypropylene-wood-carbon fiber hybrid composites10.15376/biores.11.1.1393-1406 ↗
30. Influence of designated properties on the characteristics of dombeya buettneri fiber/graphite hybrid reinforced polypropylene composites10.1038/s41598-020-68033-y ↗
31. Polypropylene hybrid composites reinforced with long glass fibres and particulate filler10.1016/j.compscitech.2004.07.010 ↗
32. Micro-structural, thermal, and mechanical properties of injection-molded glass fiber/nanoclay/polypropylene composites10.1177/0731684411435727 ↗
33. Polypropylene-bamboo/glass fiber hybrid composites: fabrication and analysis of mechanical, morphological, thermal, and dynamic mechanical behavior10.1177/0731684408093451 ↗
34. Banana/Glass fiber-reinforced polypropylene hybrid composites: fabrication and performance evaluation10.1080/03602550902725407 ↗
35. High performance hybrid PP and PLA biocomposites reinforced with short man-made cellulose fibres and softwood flour10.1016/j.compositesa.2015.03.029 ↗
36. Synergistic effect of the inclusion of glass fibers and halloysite nanotubes on the static and dynamic mechanical, thermal and flame retardant properties of polypropylene10.1088/2053-1591/aac67d ↗
37. Polypropylene hybrid composites: Effect of reinforcement of sisal and carbon fibre on mechanical, thermal and morphological properties10.1515/polyeng-2019-0355 ↗
38. Studies on tensile and flexural properties of short banana/glass hybrid fiber reinforced polystyrene composites10.1177/0021998308092194 ↗
39. Alumina–clay nanoscale hybrid filler assembling in cross-linked polyethylene based nanocomposites: mechanics and thermal properties10.1039/C4CP01532K ↗
40. Synergistic effect of cellulose nanocrystals/graphene oxide nanosheets as functional hybrid nanofiller for enhancing properties of PVA nanocomposites10.1016/j.carbpol.2015.10.072 ↗
41. Synergetic effects of graphene platelets and carbon nanotubes on the mechanical and thermal properties of epoxy composites10.1016/j.carbon.2010.10.014 ↗
42. Size and synergy effects of nanofiller hybrids including graphene nanoplatelets and carbon nanotubes in mechanical properties of epoxy composites10.1016/j.carbon.2012.07.021 ↗
43. Synergistic effects of halloysite and carbon nanotubes (HNTs + CNTs) on the mechanical properties of epoxy nanocomposites10.3934/matersci.2019.6.900 ↗
44. Mechanical properties of sisal/cattail hybrid-reinforced polyester composites10.1155/2020/6290480 ↗
45. Hybrid effect on the mechanical properties of sisal fiber and E-glass fiber reinforced polyester composites, Niger
46. A novel hybrid polyurethane composites with ZnO particles and sheath palm residues: synergistic effect10.1002/pc.25845 ↗
47. Structure and Physicochemical Properties
48. Applications of Modified and Unmodified Lignins
49. Modeling study of woody biomass: Interactions of cellulose, hemicellulose, and lignin10.1021/ef201097d ↗
50. G. Henriksson, Lignin, in: M. Ek, G. Gellerstedt, G. Henriksson (Eds.), Wood Chem. Wood Biotechnol., De Gruyter, Berlin, 2009: pp. 121–146. https://doi.org/10.1515/9783110213409.121.10.1515/9783110213409.121 ↗
51. Direct evidence for α ether linkage between lignin and carbohydrates in wood cell walls10.1038/s41598-018-24328-9 ↗
52. Lignin and lignin-carbohydrate complexes10.1021/ie50573a040 ↗
53. Structure and Properties of the Lignin—Carbohydrate Complex Polymer as an Amphipathic Substance
54. Catalytic Conversion of Structural Carbohydrates and Lignin to Chemicals10.1016/bs.acat.2017.09.002 ↗
55. Tensile stress analysis of the cell walls of coniferous tracheids
56. The mechanical properties of plant cell walls: helical structure and Young’s modulus of air dried xylem in Picea sitchensis
57. The ultrastructure of wood10.1007/BF00394956 ↗
58. Cellulose and the Hemicelluloses: Patterns for the Assembly of Lignin
59. A note on the cell-wall structure of softwood tracheids
60. Lamellation in the S2 layer of softwood tracheids as demonstrated by scanning transmission electron microscopy10.1007/BF00351930 ↗
61. Lignin-polysaccharide interactions in plant secondary cell walls revealed by solid-state NMR10.1038/s41467-018-08252-0 ↗
62. Lignin as additive in polypropylene/coir composites: Thermal, mechanical and morphological properties10.1016/j.carbpol.2011.11.041 ↗
63. Evaluation of Kraft lignin as natural compatibilizer in wood flour/polypropylene composites10.1002/pc.23821 ↗
64. Novel applications of lignin in composite materials10.1002/app.2247 ↗
65. Thermoplastic-lignocellulose composites enhanced by chemically treated Alcell lignin as compatibilizer10.1177/0892705711428660 ↗
66. Ionic liquid- modified lignin as a bio- coupling agent for natural fiber- recycled polypropylene composites10.1016/j.compositesb.2019.107587 ↗
67. Lignin in jute fabric-polypropylene composites10.1002/app.29999 ↗
68. The effect of lignin as a compatibilizer on the physical properties of coconut fiber–polypropylene composites10.1016/S0014-3057(99)00200-1 ↗
69. The effect of lignin and surface activation on the mechanical properties of rubberwood-polypropylene composites10.1080/02773819809349593 ↗
70. Preliminary studies on the use of modified ALCELL lignin as a coupling agent in the biofiber composites10.1002/app.1558 ↗
71. Improvement and analysis of fibre/matrix adhesion of regenerated cellulose fibre reinforced PP-, MAPP- and PLA-composites by the use of Eucalyptus globulus lignin10.1016/j.compositesb.2014.05.002 ↗
72. Application of lignin as natural adhesion promoter in cotton fibre-reinforced poly(lactic acid) (PLA) composites10.1007/s10853-008-2762-3 ↗
73. Functionalized cork-polymer composites (CPC) by reactive extrusion using suberin and lignin from cork as coupling agents10.1016/j.compositesb.2014.07.028 ↗
74. Use of lignin as a compatibiliser in hemp/epoxy composites10.1016/j.compscitech.2011.06.005 ↗
75. Fracture resistance of hybrid PP/elastomer/wood composites10.1016/j.compstruct.2016.01.031 ↗
76. Ternary composites of polypropylene, elastomer, and filler: Analysis of phase structure formation10.1002/pc.750110205 ↗
77. Green composites based on blends of polypropylene with liquid wood reinforced with hemp fibers: thermomechanical properties and the effect of recycling cycles10.3390/ma10090998 ↗
78. Thermal characterization of a series of lignin-based polypropylene blends10.1007/s10973-016-5596-2 ↗
79. Influence of interface interaction on the ultimate tensile properties of polymer composites10.1016/0010-4361(90)90240-W ↗
80. Composition dependence of the fracture toughness of heterogeneous polymer systems10.1016/0032-3861(95)99007-H ↗