Quasi-single-crystalline aluminum tubes with continuous rotational symmetry via tube high-pressure shearing
Source abstract
Abstract
Single crystals are renowned for their superior physical/chemical properties, arising from their perfect atomic ordering, but they are costly to fabricate. Quasi-single-crystals (QSCs) with low-angle grain boundaries (LAGBs) offer a practical alternative with moderate compensation of properties. This study presents a novel method to fabricate quasi-single-crystalline (QSC) aluminum tubes with continuous rotational symmetry (CRS) via tube High-Pressure Shearing (t-HPS) and subsequent annealing. Ultra-high purity (99.999 wt%) aluminum tubes were first processed by t-HPS at room temperature under 3 GPa hydrostatic pressure to equivalent strains of 44 and 218, and then annealed at 300 °C for 24 h. EBSD analysis revealed that t-HPS induces a sharp { 1 ¯ 10 } < 110 > single-component “tube texture” (CRS around the tube axis), with texture intensity of ∼12 m.u.d (strain 218). Post-annealing further increased texture intensity to ∼35 m.u.d, reduces high-angle grain boundaries (HAGBs) from 74 % to ∼6 %. Theoretically, ideal CRS single-crystal tubes were conjectured to require minimal structural dislocations for curvature accommodation, with thermodynamic stability analysis supporting feasibility. This QSC tube holds promise for applications like sputtering targets and optical elements.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and mechanical properties · High-pressure geophysics and materials · Nonlocal and gradient elasticity in micro/nano structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Polysynthetic twinned TiAl single crystals for high-temperature applications10.1038/nmat4677 ↗
2. L. Langston, Gems of Turbine Efficiency, Mechanical Engineering (New York, N.Y.: 1919) 136 (2014) 76–77. https://doi.org/10.1115/9.2014-Sep-9.10.1115/9.2014-Sep-9 ↗
3. Gas turbine technology10.1088/0031-9120/38/6/002 ↗
4. Custom-designed heat treatment simultaneously resolves multiple challenges facing 3D-printed single-crystal superalloys10.1016/j.matdes.2022.111075 ↗
5. Photonic microcapsules containing single-crystal colloidal arrays with optical anisotropy10.1002/adma.201900693 ↗
6. CVD-synthesized CsAg2I3 single crystals toward polarization UV photodetection and anti-counterfeiting identification
7. The emergence of organic single-crystal electronics10.1002/anie.201814439 ↗
8. Fabrication of the best conductor from single-crystal copper and the contribution of grain boundaries to the Debye temperature10.1039/C1CE06026K ↗
9. Fornari · 2018
10. Interaction of Y and impurity P on the synergistic enhancement of elongation and electrical conductivity of single crystal copper rod10.1016/j.matdes.2023.112586 ↗
11. Single-crystal permanent magnets: extraordinary magnetic behavior in the mathrmta-, mathrmcu-, and mathrmfe-substituted mathrmcemathrmco_5 systems10.1103/PhysRevApplied.11.014052 ↗
12. Quasi-single crystal semiconductors on glass substrates through biaxially oriented buffer layers10.1557/PROC-1268-EE03-06 ↗
13. Fabrication and characterization of〈 100〉-oriented quasi-single crystalline Cu lines10.1021/acs.cgd.9b01137 ↗
14. Technology and properties of quasi-single crystal copper produced by heated mould continuous casting, Metallic
15. 2:17-type SmCo quasi-single-crystal high temperature magnets10.1063/1.4918939 ↗
16. T. Wang GangHuang, LipingZhu, FeiCui, DeliangWang, QilongMeng, QingboWong, Ching-Ping, MAPbI(3) Quasi-single-crystal films composed of large-sized grains with deep boundary fusion for sensitive vis-NIR photodetectors, ACS Appl. Mater. Interfaces 12 (2020).10.1021/acsami.0c08674 ↗
17. Principles of severe plastic deformation using tube high-pressure shearing10.1016/j.scriptamat.2012.07.028 ↗
18. Tube high-pressure shearing: a simple shear path to unusual microstructures and unprecedented properties10.2320/matertrans.MT-MF2022051 ↗
19. Investigation on the strain distribution in tube high-pressure shearing
20. Evidence for a stable single component sharp texture in high purity aluminum during tube high-pressure shearing at room temperature10.1038/s41598-022-21717-z ↗
21. B. Beausir, J.-J. Fundenberger, Analysis Tools for Electron and X-ray diffraction, ATEX - software, (2017). www.atex-software.eu.
22. Severe plastic deformation for producing superfunctional ultrafine-grained and heterostructured materials: an interdisciplinary review10.1016/j.jallcom.2024.174667 ↗
23. Saturation of fragmentation during severe plastic deformation10.1146/annurev-matsci-070909-104445 ↗
24. Experimental parameters influencing grain refinement and microstructural evolution during high-pressure torsion10.1016/S1359-6454(02)00466-4 ↗
25. Saturation of grain refinement during severe plastic deformation of single phase materials: reconsiderations, current status and open questions10.2320/matertrans.MF201918 ↗
26. Ultra-grain-refinement of face-centered cubic high/medium-entropy alloys: Approaching the limit of grain refinement through severe plastic deformation and recrystallization10.1016/j.matdes.2025.114622 ↗
27. Kocks · 1998
28. Deformation mechanisms, texture, and anisotropy in zirconium and zircaloy
29. Effect of annealing temperature on texture and residual stress of Ti-6Al-4V alloy seamless tubing processed by cold rotary swaging10.1016/j.vacuum.2020.109399 ↗
30. Investigation of texture transformation paths in copper tube during floating plug drawing process10.1007/s12289-020-01538-z ↗
31. Principle of one-step synthesis for multilayered structures using tube high-pressure shearing10.1016/j.msea.2016.02.024 ↗
32. B. Hutchinson, The cube texture revisited, in: Materials Science Forum, Trans Tech Publ, 2012: pp. 3–10.10.4028/www.scientific.net/MSF.702-703.3 ↗
33. The orientation dependence of the rate of grain boundary migration10.1063/1.1699676 ↗
34. Effect of recrystallization texture on grain growth10.1007/BF03398104 ↗
35. Humphreys · 1995
36. A unified theory of recovery, recrystallization and grain growth, based on the stability and growth of cellular microstructures—I. The Basic Model10.1016/S1359-6454(97)00070-0 ↗
37. Grain growth in metals with strong textures: three-dimensional Monte Carlo simulations10.1016/S0927-0256(97)00081-5 ↗
38. Computer simulation of texture evolution during grain growth: effect of boundary properties and initial microstructure10.1016/j.actamat.2004.05.001 ↗
39. Effect of recrystallized grain size on grain growth10.1063/1.1698164 ↗
40. Computer simulation of grain growth—I. Kinetics10.1016/0001-6160(84)90151-2 ↗
41. T. Murakami, S. Ochiai, Sharpening of cube texture during grain growth in high purity aluminum, in: Trans Tech Publ, 2004: pp. 899–904.10.4028/www.scientific.net/MSF.467-470.899 ↗
42. Development of textures in recrystallization, Metal
43. Texture enhancement during grain growth of magnesium alloy AZ31B10.1016/j.actamat.2014.12.009 ↗
44. Crystallographic texture change during grain growth10.1007/s11837-004-0075-9 ↗
45. texture development during grain growth in nonoriented electrical steels10.2355/isijinternational.45.743 ↗
46. Texture development during grain growth in polycrystals with strong preferred orientation10.1016/S1359-6454(99)00041-5 ↗
47. Critical assessment 30: grain growth–unresolved issues10.1080/02670836.2018.1434863 ↗
48. M. Ohring, 7 – Mechanical behavior of solids, in: M. Ohring (Ed.), Engineering Materials Science, Academic Press, San Diego, 1995: pp. 299–V. https://doi.org/10.1016/B978-012524995-9/50031-3.10.1016/B978-012524995-9/50031-3 ↗
49. Long-term annealing of high purity aluminum single crystals: new insights into Harper-Dorn creep10.1016/j.msea.2017.08.045 ↗
50. Short communication: Assessment of the dislocation density using X-ray topography in Al single crystals annealed for long times near the melting temperature
51. Some geometrical relations in dislocated crystals10.1016/0001-6160(53)90054-6 ↗
52. Polygonization as low energy dislocation structure10.1007/s00161-010-0137-x ↗
53. Polygonization: theory and comparison with experiments
54. On bending of single crystal beam with continuously distributed dislocations10.1016/j.ijplas.2013.02.010 ↗
55. B.D. Nguyen, Formation of dislocation structure in single crystals during plastic deformations, (2016).
56. X. Cui, K.C. Le, A single crystal beam bent in double slip, in: Generalized Models and Non-Classical Approaches in Complex Materials 1, Springer, 2018: pp. 223–246.10.1007/978-3-319-72440-9_11 ↗
57. Is a bent crystal still a single crystal?10.1002/anie.201814387 ↗
58. Hull · 2011
59. Fabrication of high-quality single-crystal Cu thin films using radio-frequency sputtering10.1038/srep06230 ↗
60. Wasa · 2004
61. Bent crystal design and characterization for high-energy physics experiments10.3390/cryst12091263 ↗
62. New beam optics on the basis of bent single crystals10.1016/j.nimb.2017.02.086 ↗
63. Steering of Sub-GeV electrons by ultrashort Si and Ge bent crystals10.1140/epjc/s10052-017-5456-7 ↗
64. Analysis of a novel X-ray lens for converging beam radiotherapy10.1038/s41598-021-98888-8 ↗
65. Laue Gamma-ray lenses for space astrophysics: status and prospects10.1155/2010/215375 ↗