Permeability and mechanical integrity of porous biomorphic SiC ceramics for application as hot-gas filters
Source abstract
Abstract
Biomorphic SiC is a biotemplated material fabricated by Si melt-infiltration of carbon preforms from wood pyrolysis. In this work, porous bioSiC ceramics from five different wood precursors, with porosities between 45 and 72% were studied for their feasibility in filtering applications.Gas permeability and mechanical stability were investigated as a function of the microstructure of the starting wood precursor. Air-permeation performance at room temperature was measured for a range of flow rates, and the permeability constants were assessed by fitting of Forchheimer's equation to the experimental data. Darcian permeabilities were achieved in the range 10-10 m, while inertial terms were in the range 10-10 m, showing a correlation with the average pore size and orientation of the larger channels. Regarding the mechanical stability, maximum compressive strength values were reached in the range of 3-115 MPa.These results improve our understanding of the ways in which the microstructure influences permeability and mechanical robustness, enabling the device requirements to be tailored by selecting the wood precursor. It was also shown that these materials are promising for hot-gas filtering applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Polymer Foaming and Composites · Thermal properties of materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Permeability and nanoparticle filtration assessment of cordierite-bonded porous SiC ceramics10.1021/ie402876v ↗
2. A new source for production of ceramic filters10.1016/j.matlet.2015.01.131 ↗
3. Controlled growth of zinc oxide microrods by hydrothermal process on porous ceramic supports for catalytic application10.1016/j.jallcom.2013.10.019 ↗
4. Heat transfer and pressure drop correlations for finned plate ceramic heat exchangers10.1016/j.energy.2015.04.017 ↗
5. Fabrication and morphology control of highly porous mullite thermal insulators prepared by gelation freezing route10.1016/j.jeurceramsoc.2015.09.041 ↗
6. Surface functionalization and biomedical applications based on SiC10.1088/0022-3727/40/20/S20 ↗
7. Porous SiO2 nanofiber grafted novel bioactive glass–ceramic coating: a structural scaffold for uniform apatite precipitation and oriented cell proliferation on inert implant10.1016/j.msec.2016.01.053 ↗
8. Chemical characterization of particulate emissions from diesel engines: a review10.1016/j.jaerosci.2007.08.001 ↗
9. Evaluation of carcinogenic hazard of diesel engine exhaust needs to consider revolutionary changes in diesel technology10.1016/j.yrtph.2012.04.005 ↗
10. A review on diesel soot emission, its effect and control
11. Particulate emissions from diesel engines: correlation between engine technology and emissions10.1186/1745-6673-9-6 ↗
12. Review of the state-of-the-art of exhaust particulate filter technology in internal combustion engines10.1016/j.jenvman.2015.02.027 ↗
13. Ceramic diesel particulate filters10.1111/j.1744-7402.2005.02044.x ↗
14. Single wall diesel particulate filter (DPF) filtration efficiency studies using laboratory generated particles10.1016/j.ces.2008.12.011 ↗
15. Silicon carbide — a survey of synthetic approaches, properties and applications
16. Biomorphic SiC: a new engineering ceramic material10.1111/j.1744-7402.2004.tb00155.x ↗
17. Biomorphic cellular silicon carbide ceramics from wood: I. processing and microstructure10.1016/S0955-2219(98)00156-3 ↗
18. Environmentally conscious ceramics (ecoceramics) from natural wood precursors10.1016/j.cossms.2003.09.004 ↗
19. Biomorphic cellular ceramics10.1002/(SICI)1527-2648(200003)2:3<105::AID-ADEM105>3.0.CO;2-P ↗
20. Optimization of the fabrication process for medium density fiberboard (MDF)-based biomimetic SiC10.1016/j.ijrmhm.2008.10.016 ↗
21. Reaction–formation mechanisms and microstructure evolution of biomorphic SiC10.1007/s10853-007-2207-4 ↗
22. Fabrication, chemical etching, and compressive strength of porous biomimetic SiC for medical implants10.1557/JMR.2008.0392 ↗
23. Precursor selection and its role in the mechanical properties of porous SiC derived from wood10.1016/j.msea.2006.05.033 ↗
24. Microstructural and mechanical evaluation of porous biomorphic silicon carbide for high temperature filtering applications10.1016/j.jeurceramsoc.2010.06.014 ↗
25. New candle prototype for hot gas filtration industrial applications10.1016/j.fuel.2012.12.054 ↗
26. Permeability of ceramic foams to compressible and incompressible flow10.1016/j.jeurceramsoc.2003.11.014 ↗
27. Production and permeability of porous Si3N4 ceramics produced by starch addition10.1016/j.jascer.2013.06.002 ↗
28. Microstructure–permeability relation of porous β-Si3N4 ceramics10.1016/j.jeurceramsoc.2012.12.022 ↗
29. Low cost porous alumina with tailored gas permeability and mechanical properties prepared using rice husk and sucrose for filter applications10.1016/j.micromeso.2015.04.004 ↗
30. Handbook of SiC properties for fuel performance modeling10.1016/j.jnucmat.2007.05.016 ↗
31. Effect of flow configuration on Darcian and Forchheimer permeabilities determination in a porous composite tube10.1016/j.ijhydene.2015.10.054 ↗
32. Gas permeability and adsorbability of the glass-bonded porous silicon carbide ceramics with controlled pore size10.1016/j.ceramint.2014.10.032 ↗
33. Viscosity and thermal conductivity of dry air in the gaseous phase10.1063/1.555744 ↗
34. Assessment of Forchheimer's equation to predict the permeability of ceramic foams10.1111/j.1151-2916.1999.tb02024.x ↗
35. Biomorphous ceramics from lignocellulosics10.1016/S0955-2219(00)00179-5 ↗
36. Electrical properties of biomorphic SiC ceramics and SiC/Si composites fabricated from medium density fiberboard10.1016/j.jeurceramsoc.2010.06.015 ↗
37. Effects of the initial α-SiC content on the microstructure, mechanical properties, and permeability of macroporous silicon carbide ceramics10.1016/j.jeurceramsoc.2011.11.040 ↗
38. Strength and gas permeability of porous cordierite-mullite ceramics with different phase compositions and microstructures prepared by a pore-forming in-situ technique
39. Anisotropy of the thermal conductivity and electrical resistivity of the SiC/Si biomorphic composite based on a white-eucalyptus biocarbon template10.1134/S1063783406120079 ↗
40. Thermal conductivity of porous silicon carbide derived from wood precursors10.1111/j.1551-2916.2007.01777.x ↗
41. Permeability of porous gelcast scaffolds for bone tissue engineering10.1007/s10934-009-9331-2 ↗
42. Fluid flow through randomly packed columns and fluidized beds10.1021/ie50474a011 ↗
43. Gas permeability of microcellular ceramic foams10.1021/ie061335d ↗
44. Flow through porous media-the Ergun equation revisited10.1021/i160071a001 ↗
45. Investigations on material and mechanical properties, air-permeation behavior and filtration performance of mullite-bonded porous SiC ceramics10.1111/ijac.12090 ↗
46. Gas permeability and mechanical properties of porous alumina ceramics with unidirectionally aligned pores10.1016/j.jeurceramsoc.2006.02.030 ↗
47. Properties of ceramic foam catalyst supports: pressure drop10.1016/S0926-860X(00)00508-1 ↗
48. Gibson · 1998
49. The microscopic analysis of high forchheimer number flow in porous media10.1007/BF00654407 ↗
50. Influence of sample thickness and measurement set-up on the experimental evaluation of permeability of metallic foams10.1007/s10934-009-9312-5 ↗
51. Mechanical behavior of biomorphic Si/SiC porous composites10.1016/j.scriptamat.2005.07.033 ↗
52. Low density biomorphic silicon carbide: microstructure and mechanical properties10.1016/S0955-2219(02)00137-1 ↗
53. The role of carbon biotemplate density in mechanical properties of biomorphic SiC10.1016/j.jeurceramsoc.2008.05.049 ↗
54. Measurement and prediction of filtration efficiency evolution of soot loaded diesel particulate filters10.1016/j.ces.2010.05.020 ↗
55. Engines and nanoparticles: a review10.1016/S0021-8502(97)10037-4 ↗
56. M. Innocentini · 2006 · 313
57. Processing of microcellular silicon carbide ceramics with a duplex pore structure10.1016/j.jeurceramsoc.2010.04.027 ↗