journal article·2025-12Open access

Thermal shock effect on microstructure, electrical properties and corrosion performance of ultrasonically welded wire harness-terminal joints

Jianxiong Su, Gang Xiao, Lun Zhao, Zeshan Abbas, Jiguang Li, Liya Li, Ming Li, Sharon Kao-walter

Materials & Design· Volume 260

Abstract

• Simulated 3-year aging behavior of ultrasonically welded joint under −40∼150 ℃. • EBSD investigated changes in grain boundaries and texture of joints. • Thermal shock is increased by 6.08 % during mechanical properties of welded joints. • Electrical properties test investigated 14.75 % increase in resistance of joints. • Corrosion resistance of joints was improved by salt spray corrosion. With the rapid development of new energy vehicles and power electronics industry, the stability and durability of automotive wiring harness connections have become key technical issues. In this paper, a thermal shock test is designed for aging phenomenon caused by extreme temperature conditions of 25 square copper wire harness-terminal connectors in actual use of vehicles. The results show that after 72 thermal shock cycles, the grain organization of copper wire inside connector is significantly refined and the percentage of large-angle grain boundaries is increased. In addition, the distribution of cubic texture orientation {100} <001> weakens and transforms towards the shear texture {111} <111> parallel to the Z direction of common grain organization. In tensile test, the average tensile strength of joints after thermal shock increased by 6.08 %. The resistance of aged joints increased by 14.75 %, but still met the electrical safety standards. The temperature rise of joint resistance increased by 3.81 °C after being connected to a constant current of 100A and lasting for 2.5 h. In terms of corrosion resistance, the improvement of joints after thermal shock test is related to microstructural changes in joint material. Grain refinement introduced a high fraction of grain boundaries and more grain boundaries were able to act as barriers to prevent the penetration and diffusion of corrosive media.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Surface Treatment and Residual Stress

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. The government regulation and market behavior of the new energy automotive industry10.1016/j.jclepro.2018.11.124 ↗
2. [Retracted] Deep learning‐based economic forecasting for the new energy vehicle industry
3. The application of new energy materials in new-energy vehicle10.54097/ajst.v2i3.1537 ↗
4. Sustainable development via environmental taxes and efficiency in energy: evaluating trade adjusted carbon emissions10.1002/sd.2400 ↗
5. Design and analysis of a novel adjustable SVAWT for wind energy harvesting in new energy vehicle10.3390/wevj13120242 ↗
6. Deep learning-based connector detection for robotized assembly of automotive wire harnesses
7. Ultrasonic system and ultrasonic metal welding performance: a status review10.1016/j.jmapro.2022.10.067 ↗
8. Morphological evolution of single-core multi-strand wires during ultrasonic metal welding10.3390/met14030362 ↗
9. Mechanical reliability of Cu cored solder ball in flip chip package under thermal shock test10.1016/j.microrel.2020.113918 ↗
10. Current-induced solder evolution and mechanical property of Sn-3.0 Ag-0.5 Cu solder joints under thermal shock condition10.1016/j.jallcom.2023.172519 ↗
11. Experimental study under thermal shock environment to investigate effect of welding width on properties of ultrasonically welded joints of multiple copper cables10.1038/s41598-024-73758-1 ↗
12. Investigation on the moderately high-temperature tensile behavior of the laser powder bed fusion-fabricated 17-4 PH steel10.1016/j.msea.2024.147221 ↗
13. Low-temperature mechanical properties of slotted and normal terminals using ultrasonic wire harness welding
14. Comparative analysis of improved YOLO v5 models for corrosion detection in coastal environments10.3390/jmse12101754 ↗
15. Insight into the microstructural characteristics and corrosion properties of AZ31 Mg alloy coated with polyurethane containing nanostructures of copper metal organic frameworks10.1016/j.matlet.2023.134294 ↗
16. Corrosion behavior of homogenized and extruded 1100 aluminum alloy in acidic salt spray10.3390/ma17061279 ↗
17. Photoelectrochemical effect of Cu2O on the corrosion behavior of Cu in sodium sulfate solution10.1016/j.jmst.2023.03.020 ↗
18. Corrosion behavior of AA2024/pure copper bimetal manufactured by friction stir welding with a hybrid zinc-graphite interlayer10.1016/j.jmrt.2024.06.067 ↗
19. Effect of process parameters on the interface temperature in ultrasonic aluminum wire bonding10.1016/j.jmapro.2018.09.020 ↗
20. Ultrasonic welding of Cu to Al cables bonding: evolution of microstructure and mechanical properties10.1016/j.matchar.2023.112905 ↗
21. Mechanism of grain boundary angle on solidification cracking in directed energy deposition Hastelloy X superalloys
22. Effect of torsional rate on the gradient microstructure, texture evolutions and microhardness of pure copper10.1016/j.matchar.2020.110141 ↗
23. Joints formation and bonding mechanism of ultrasonic welded multi-strand single core copper cables with copper terminals10.1016/j.matlet.2022.133015 ↗
24. Texture and intermetallic compounds of the Cu/Al dissimilar joints by high power ultrasonic welding
25. Microscopic mechanism of ultrasonically welded joints: the role of terminal roughness and wire diameter
26. Mechanical properties of gradient structured copper obtained by ultrasonic surface rolling10.1016/j.surfcoat.2021.128031 ↗
27. Effect of cold drawing strain on the microstructure, mechanical properties and electrical conductivity of low-oxygen copper wires10.1016/j.msea.2021.141348 ↗
28. Abnormal grain growth of (110)-oriented perpendicular nanotwinned copper into ultra-large grains at low temperatures10.1016/j.jmst.2024.03.036 ↗
29. Grain boundary evolution and effect on electrical conductivity of CuTi alloys prepared by accumulative roll bonding-diffusion alloying process10.1016/j.matchar.2023.112958 ↗
30. Contribution of grain boundary to strength and electrical conductivity of annealed copper wires10.1016/j.jmrt.2023.08.012 ↗
31. Microstructure evolution of high-strength and ultra-high-conductivity microfilament wire prepared by continuous deformation of single-crystal copper10.1007/s10853-022-07919-w ↗
32. Effect of grain boundaries and crystal orientation on etching behavior of 12 µm thick rolled copper foil
33. Evolution of microstructure, mechanical properties and corrosion resistance of ultrasonic assisted welded-brazed Mg/Ti joint10.1016/j.jmst.2016.08.029 ↗
34. Microstructure evolution in Cu-2.13 Fe-0.026 P (wt%): the contribution of texture intensity to residual stress variation
35. Recent advances in protective technologies against copper corrosion10.1016/j.jmst.2024.02.060 ↗
36. Grain-size-dependent ductile-to-brittle fracture mechanism of titanium sheets10.1016/j.scriptamat.2022.114877 ↗
37. Grain refinement and columnar-to-equiaxed transition of Ti6Al4V during additive manufacturing via different laser oscillations10.1016/j.ijmachtools.2023.104031 ↗