journal article·2016-10

Characterization of microstructure evolution in β-γ TiAl alloy containing high content of Niobium using constitutive equation and power dissipation map

Jingjing Xin, Laiqi Zhang, Gengwu Ge, Junpin Lin

Materials & Design· Volume 107
Publisher page

Abstract

Abstract In order to study the hot deformation behavior and microstructure evolution of β-γ TiAl alloy containing high content of Nb, isothermal hot compression tests were conducted in the strain rate range of 0.001–1.0 s− 1 and temperature range of 1273–1473 K. The Arrhenius-type constitutive equation was successfully established for expressing the non-linear relation among true stress, strain, strain rate and deformation temperature. The average absolute relative error and correlation coefficient are 6.009% and 0.9961, respectively, which reflects good predicted accuracy of developed constitutive equation. Conventional and 3D power dissipation maps based on the developed constitutive equations and dynamic material model were successfully established. Efficiency of power dissipation increases with higher deformation temperature, lower strain rate and higher strain, which indicates that more power is dissipated through changing microstructure. These deformed specimens with equal efficiency of power dissipation exhibit similar microstructures during hot deformation. The content of dynamic recrystallization (DRX) grains increases with the increase of efficiency of power dissipation (η). The microstructures with η ≥ 0.55 mainly consist of equiaxed DRX grains, corresponding to the temperature range of 1273–1473 K and the strain rate range of 0.001–0.01 s− 1 at the strain of 0.5, which could be the optimum hot working window of alloy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Design, processing, microstructure, properties, and applications of advanced intermetallic TiAl alloys10.1002/adem.201200231 ↗
2. Investigation of macro/microstructure evolution and mechanical properties of directionally solidified high-Nb TiAl-based alloy10.1016/j.matdes.2015.09.116 ↗
3. Review of alloy and process development of TiAl alloys10.1016/j.intermet.2005.10.019 ↗
4. An overview of monolithic titanium aluminides based on Ti3Al and TiAl10.1016/S0254-0584(01)00328-5 ↗
5. Effects of microstructure on the deformation and fracture of γ-TiAl alloys10.1016/0921-5093(94)03271-8 ↗
6. Development of TiAl alloys with excellent mechanical properties and oxidation resistance10.1016/j.matdes.2013.08.083 ↗
7. The role of oxidation and counterface in the high temperature tribological properties of TiAl intermetallics10.1016/j.matdes.2015.06.115 ↗
8. A preliminary study on the creep behavior of Ti–45Al–10Nb alloy10.1016/S0921-5093(01)01150-9 ↗
9. Effects of Nb and Al on the microstructures and mechanical properties of high Nb containing TiAl base alloys10.1016/S0966-9795(02)00037-7 ↗
10. Determination of stacking fault energies in a high-Nb TiAl alloy at 298K and 1273K
11. Experimental studies and thermodynamic simulation of phase transformations in high Nb containing γ-TiAl based alloys10.3139/146.101569 ↗
12. Deformability and microstructure transformation of pilot ingot of Ti–45Al–(8–9) Nb–(W, B, Y) alloy10.1016/j.msea.2005.09.110 ↗
13. Phase fractions, transition and ordering temperatures in TiAl–Nb–Mo alloys: an in-and ex-situ study10.1016/j.intermet.2010.04.008 ↗
14. Microstructure evolution and mechanical properties of a novel beta γ-TiAl alloy10.1016/j.intermet.2012.07.012 ↗
15. In and ex situ investigations of the β-phase in a Nb and Mo containing γ-TiAl based alloy10.1016/j.intermet.2008.03.008 ↗
16. Thermomechanical characterization of β-stabilized Ti–45Al–7Nb–0.4W–0.15B alloy10.1016/j.intermet.2011.03.021 ↗
17. In situ study of dynamic recrystallization and hot deformation behavior of a multiphase titanium aluminide alloy10.1063/1.3266177 ↗
18. Hot forging design and microstructure evolution of a high Nb containing TiAl alloy10.1016/j.intermet.2014.11.002 ↗
19. Microstructure and mechanical properties of a forged β-solidifying γ TiAl alloy in different heat treatment conditions10.1016/j.intermet.2014.11.008 ↗
20. Microstructural design and mechanical properties of a cast and heat-treated intermetallic multi-phase γ-TiAl based alloy10.1016/j.intermet.2013.09.010 ↗
21. High temperature deformation behavior of near γ-phase high Nb-containing TiAl alloy10.1016/j.intermet.2014.03.013 ↗
22. Modified Johnson–Cook material flow model for hot deformation processing10.1007/s10853-009-4010-x ↗
23. Mathematical modeling for high temperature flow behavior of as-cast Ti–45Al–8.5Nb–(W, B, Y) alloy10.1016/j.matdes.2008.04.046 ↗
24. On the mechanism of hot deformation10.1016/0001-6160(66)90207-0 ↗
25. The hot deformation behavior and processing map of Ti–47.5Al–Cr–V alloy10.1016/j.matdes.2015.07.027 ↗
26. Hot working behavior and processing map of a γ-TiAl alloy synthesized by powder metallurgy10.1016/j.matdes.2011.06.003 ↗
27. Microstructural control in hot working of IN-718 superalloy using processing map10.1007/BF02652327 ↗
28. Characterization of hot processing parameters of powder metallurgy TiAl-based alloy based on the activation energy map and processing map10.1016/j.matdes.2015.07.140 ↗
29. On the development of instability criteria during hotworking with reference to IN 71810.1016/S0921-5093(98)00764-3 ↗
30. Characterization of hot workability in AA 7050 aluminum alloy using activation energy and 3-D processing map10.1016/j.jmatprotec.2015.05.018 ↗
31. Compressive deformation behavior of Al 2024 alloy using 2D and 4D processing maps10.1007/s10853-010-5203-z ↗
32. Characterization of hot deformation behavior of as-cast TC21 titanium alloy using processing map10.1016/j.msea.2010.11.015 ↗
33. Deformation behavior in the isothermal compression of Ti–5Al–5Mo–5V–1Cr–1Fe alloy10.1016/j.msea.2013.09.066 ↗
34. Microstructural modeling of metadynamic recrystallization in hot working of IN 718 superalloy10.1016/S0921-5093(00)01053-4 ↗
35. Deformation and dynamic recrystallization behavior of a high Nb containing TiAl alloy10.1016/j.jallcom.2012.11.076 ↗
36. Constitutive analysis to predict high temperature flow stress in 20CrMo continuous casting billet10.1016/j.matdes.2012.09.049 ↗
37. The high temperature flow behavior modeling of AZ81 magnesium alloy considering strain effects10.1016/j.matdes.2012.02.049 ↗
38. Hot workability in process modeling of a bearing steel by using combined constitutive equations and dynamic material model10.1016/j.matdes.2013.07.055 ↗