Effect of dual phase structure induced by chemical segregation on hot tearing reduction in additive manufacturing
Source abstract
Abstract
It is of great significance to explore the chemical compositions, which have not been hitherto examined for their suitability for additive manufacturing (AM), so as to broaden AM’s material library. Since solidification cracking is a major impediment in AM of alloys, especially high entropy alloys (HEAs), a detailed study on the cracking issue during AM is imperative. Keeping this in mind, a customized laser powder bed fusion (LPBF) setup is utilized to fabricate a compositionally graded AlxCoCrFeNi (x = 0.04–0.75) HEA, using the equiatomic AlCoCrFeNi and CoCrFeNi powders as feedstock, to examine the compositional range that enables crack-free fabrication. Experimental results show that when x ≤ 0.7, crack-free fabrication is possible. This compositional range exceeds the threshold reported in the recent literature. Microstructural characterization reveals a constant dual phase structure throughout the gradient, which is induced by the chemical segregation. Further analysis shows that both utilizing AlCoCrFeNi powder as Al source and the segregation contribute to the enhanced printability. The results suggest that the dual phase structure introduced by chemical segregation can effectively inhibit the initiation and propagation of hot tearing problem in metal additive manufacturing.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Additive manufacturing of metallic components – Process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
2. Fracture and fatigue in additively manufactured metals10.1016/j.actamat.2021.117240 ↗
3. Directed energy deposition of metals: processing, microstructures, and mechanical properties
4. Emerging metallic systems for additive manufacturing: In-situ alloying and multi-metal processing in laser powder bed fusion10.1016/j.pmatsci.2021.100795 ↗
5. 3D printing of high-strength aluminium alloys10.1038/nature23894 ↗
6. Fracture resistance of AlSi10Mg fabricated by laser powder bed fusion10.1016/j.actamat.2021.116869 ↗
7. Fatigue strength of additively manufactured 316L austenitic stainless steel10.1016/j.actamat.2020.08.033 ↗
8. Origin of dislocation structures in an additively manufactured austenitic stainless steel 316L10.1016/j.actamat.2020.07.063 ↗
9. High cycle fatigue in selective laser melted Ti-6Al-4V10.1016/j.actamat.2020.05.041 ↗
10. Cross-testing laser powder bed fusion production machines and powders: Variability in mechanical properties of heat-treated 316L stainless steel10.1016/j.matdes.2021.109684 ↗
11. Laser powder bed fusion of compositionally graded CoCrMo-Inconel 718
12. Selective laser melting of Fe–Al alloys with simultaneous gradients in composition and microstructure10.1016/j.msea.2021.141608 ↗
13. Compositionally graded AlxCoCrFeNi high-entropy alloy manufactured by laser powder bed fusion10.1016/j.mtla.2021.101308 ↗
14. Development and characterization of Ti-6Al-4V to 304L stainless steel gradient components fabricated with laser deposition additive manufacturing10.1016/j.matdes.2016.05.016 ↗
15. Microstructure-property correlations in as-built and heat-treated compositionally graded stainless steel 316L-Inconel 718 alloy fabricated by laser powder bed fusion10.1016/j.msea.2022.144515 ↗
16. Reducing hot tearing by grain boundary segregation engineering in additive manufacturing: example of an AlxCoCrFeNi high-entropy alloy10.1016/j.actamat.2020.116505 ↗
17. Elemental segregation in an AlCoCrFeNi high-entropy alloy–A comparison between selective laser melting and induction melting10.1016/j.jallcom.2018.12.267 ↗
18. In-situ alloyed, oxide-dispersion-strengthened CoCrFeMnNi high entropy alloy fabricated via laser powder bed fusion10.1016/j.matdes.2020.108966 ↗
19. In-situ alloyed CoCrFeMnNi high entropy alloy: Microstructural development in laser powder bed fusion10.1016/j.jmst.2021.11.083 ↗
20. ASTM E8/E8M: standard test methods for tension testing of metallic materials.
21. Effects of Al addition on the microstructure and mechanical property of AlxCoCrFeNi high-entropy alloys10.1016/j.intermet.2012.03.005 ↗
22. Microstructure and mechanical property of as-cast, -homogenized, and -deformed AlxCoCrFeNi (0≤x≤2) high-entropy alloys10.1016/j.jallcom.2009.08.090 ↗
23. Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys10.1063/1.3587228 ↗
24. Composition design of high entropy alloys using the valence electron concentration to balance strength and ductility10.1016/j.actamat.2017.10.058 ↗
25. Compositionally graded CoCrFeNiTi high-entropy alloys manufactured by laser powder bed fusion: A combinatorial assessment10.1016/j.jallcom.2021.160825 ↗
26. Phase selection motifs in High Entropy Alloys revealed through combinatorial methods: Large atomic size difference favors BCC over FCC10.1016/j.actamat.2019.01.023 ↗
27. Compositionally graded high entropy alloy with a strong front and ductile back
28. Tensile ductility of an AlCoCrFeNi multi-phase high-entropy alloy through hot isostatic pressing (HIP) and homogenization10.1016/j.msea.2015.08.078 ↗
29. Mechanical and corrosion properties of AlCoCrFeNi high-entropy alloy fabricated with selective electron beam melting
30. Effect of SLM processing parameters on microstructures and mechanical properties of Al0. 5CoCrFeNi high entropy alloys10.3390/met10020292 ↗
31. 5FeCoCrNi high entropy alloy prepared by selective laser melting with gas-atomized pre-alloy powders10.1016/j.msea.2018.10.035 ↗
32. Microstructural evolution and mechanical properties of al0. 5cocrfeni high-entropy alloy after cold rolling and annealing treatments10.1007/s11665-021-05886-y ↗
33. Enhancing fatigue life by ductile-transformable multicomponent B2 precipitates in a high-entropy alloy10.1038/s41467-021-23689-6 ↗
34. Fully recrystallized Al 0.5 CoCrFeNi high-entropy alloy strengthened by nanoscale precipitates10.1007/s12540-019-00284-5 ↗
35. Optimizing the coupled effects of Hall-Petch and precipitation strengthening in a Al0. 3CoCrFeNi high entropy alloy10.1016/j.matdes.2017.02.072 ↗
36. Strength-ductility synergy of Al0. 1CoCrFeNi high-entropy alloys with gradient hierarchical structures10.1016/j.scriptamat.2019.04.002 ↗
37. Tension/compression asymmetry in additive manufactured face centered cubic high entropy alloy10.1016/j.scriptamat.2016.10.023 ↗
38. Superior high tensile elongation of a single-crystal CoCrFeNiAl0. 3 high-entropy alloy by Bridgman solidification10.1016/j.intermet.2014.05.018 ↗
39. Microstructure and tensile behaviors of FCC Al0. 3CoCrFeNi high entropy alloy10.1016/j.jallcom.2008.12.088 ↗
40. Enhanced tensile yield strength in laser additively manufactured Al0. 3CoCrFeNi high entropy alloy10.1016/j.mtla.2019.100522 ↗
41. The FCC to BCC phase transformation kinetics in an Al0. 5CoCrFeNi high entropy alloy10.1016/j.jallcom.2017.03.249 ↗
42. Microstructure evolution and mechanical properties of AlxCoCrFeNi high-entropy alloys by laser melting deposition10.1016/j.vacuum.2020.109875 ↗
43. Perspective on hetero-deformation induced (HDI) hardening and back stress10.1080/21663831.2019.1616331 ↗
44. Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility10.1073/pnas.1517193112 ↗