3D-printed nanoporous ceramics: Tunable feedstock for direct ink write and projection microstereolithography
Source abstract
Abstract
Porous ceramic materials have a wide range of potential applications for which controlling the structure across multiple length scales is desirable. Additive manufacturing (AM) of porous ceramics is therefore of interest for design flexibility. Here, a ceramic ink compatible with 2 AM techniques, projection microstereolithography (PμSL) and direct ink write (DIW), was formulated and demonstrated printed parts with a range of controllable feature sizes as well as nanoporosity resulting from partial sintering. A diacrylate polymer was mixed with 3% yttria partially stabilized zirconia (3YZ) ceramic nanoparticles having different sizes and solids loadings to find formulations that meet the printing requirements of both AM techniques. Detailed rheological studies were used to determine optimal ink formulations to use for either printing method. The resulting 3YZ structures printed with DIW and PμSL have engineered macro cavities with span lengths greater than several millimeters, wall thicknesses of 200 to 540 μm, and porosity within the wall structure on the order of 100 nm. This study revealed that through facile composition changes to the 3YZ ink, it was feasible to use the same ink base for multiple AM techniques without the need for separate cumbersome ink development processes.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Innovations in Concrete and Construction Materials · Photopolymerization techniques and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Additive manufacturing (3D printing): a review of materials, methods, applications and challenges10.1016/j.compositesb.2018.02.012 ↗
2. On the environmental impact of 3D printing technology10.1016/j.apmt.2020.100689 ↗
3. Recent advances in 3D printing of porous ceramics: a review10.1016/j.cossms.2017.08.002 ↗
4. Additive manufacturing of ceramic-based materials10.1002/adem.201400097 ↗
5. 3D printing of PVA/hexagonal boron nitride/bacterial cellulose composite scaffolds for bone tissue engineering10.1016/j.matdes.2020.109094 ↗
6. Direct ink writing of organic and carbon aerogels10.1039/C8MH00603B ↗
7. Highly compressible 3D periodic graphene aerogel microlattices10.1038/ncomms7962 ↗
8. 3D-printed transparent Glass10.1002/adma.201701181 ↗
9. Direct ink writing of geopolymeric inks10.1016/j.jeurceramsoc.2017.01.030 ↗
10. Direct ink writing of three-dimensional ceramic structures10.1111/j.1551-2916.2006.01382.x ↗
11. Toward digitally controlled catalyst architectures: Hierarchical nanoporous gold via 3D printing10.1126/sciadv.aas9459 ↗
12. 3D printing of emulsions and foams into hierarchical porous ceramics10.1002/adma.201603390 ↗
13. 3D printing of ceramics: a review10.1016/j.jeurceramsoc.2018.11.013 ↗
14. 3D printing of porous Si2N2O ceramics based on strengthened green bodies fabricated via strong colloidal gel10.1016/j.matdes.2019.108220 ↗
15. Ultralight, Ultrastiff mechanical metamaterials10.1126/science.1252291 ↗
16. Additively manufacturable micro-mechanical logic gates10.1038/s41467-019-08678-0 ↗
17. Lightweight micro lattices with nanoscale features fabricated from projection microstereolithography
18. Oxygen-controlled bottom-up mask-projection stereolithography for ceramic 3D printing10.1016/j.ceramint.2017.08.014 ↗
19. Freeform fabrication of ceramics via Stereolithography10.1111/j.1151-2916.1996.tb09022.x ↗
20. Ceramic stereolithography: additive manufacturing for ceramics by photopolymerization10.1146/annurev-matsci-070115-031841 ↗
21. The influences of the material properties on ceramic micro-stereolithography10.1016/S0924-4247(02)00264-9 ↗
22. Manufacturing porous ceramic materials by tape casting-a review10.1016/j.jeurceramsoc.2017.11.047 ↗
23. Engineered porosity via tape casting, lamination and the percolation of pyrolyzable particulates10.1111/j.1151-2916.1999.tb01988.x ↗
24. Strength and toughness of tape-cast yttria-stabilized zirconia10.1111/j.1151-2916.2000.tb01507.x ↗
25. Synthesis of highly porous yttria-stabilized zirconia by tape-casting methods10.1111/j.1151-2916.2003.tb03311.x ↗
26. Shrinkage of tape cast products during binder burnout10.1111/jace.13270 ↗
27. Some features of porous permeable ceramic molding by slip casting10.1007/s11148-015-9833-1 ↗
28. Stereolithography of structural complex ceramic parts10.1023/A:1016102210277 ↗
29. Various methods of machining advanced ceramic materials - review10.1016/0924-0136(94)90144-9 ↗
30. Direct ink writing of three-dimensional ceramic structures10.1111/j.1551-2916.2006.01382.x ↗
31. Ceramic fabrication using mask-image-projection-based Stereolithography integrated with tape-casting10.1016/j.jmapro.2015.06.022 ↗
32. Processing routes to macroporous ceramics: a review10.1111/j.1551-2916.2006.01044.x ↗
33. Architected cellular ceramics with tailored stiffness via direct foam writing10.1073/pnas.1616769114 ↗
34. Processing and properties of advanced porous ceramics: an application based review10.1016/j.ceramint.2014.06.095 ↗
35. Synthesis and characterization of suspension-derived, porous ion-conducting ceramic membranes10.1111/j.1151-2916.1999.tb02135.x ↗
36. Surpassing the conventional limitations of CO2 separation membranes with hydroxide/ceramic dual-phase membranes10.1016/j.memsci.2018.09.028 ↗
37. Ceron · 2020
38. M. Mitchell
39. Downing · 2021 · 197
40. Hydrophobic porous alumina hollow fiber for water desalination via membrane distillation process10.1016/j.memsci.2012.02.011 ↗
41. New designs of ceramic hollow fibres toward broadened applications10.1016/j.memsci.2015.12.047 ↗
42. Dispersion and properties of zirconia suspensions for stereolithography10.1111/ijac.13321 ↗
43. Spreadability measurements to assess structural equivalence (Q3) of topical formulations--a technical note10.1208/s12249-007-9009-5 ↗
44. Rheological behavior of carbon nanotube-alumina nanoparticle dispersion systems10.1016/j.powtec.2007.03.036 ↗
45. Additive-manufacturing of 3D glass-ceramics down to nanoscale resolution10.1039/C8NH00293B ↗
46. Experimental and theoretical determination of the electronic structure and optical properties of 3 phases of ZrO210.1103/PhysRevB.49.5133 ↗
47. Light scattering in absorbing ceramic suspensions: effect on the width and depth of photopolymerized features10.1016/j.jeurceramsoc.2014.12.006 ↗
48. The influences of the material properties on ceramic micro-stereolithography10.1016/S0924-4247(02)00264-9 ↗
49. Light curing strategies for lithography-based additive manufacturing of customized ceramics
50. Direct selective laser sintering and melting of ceramics: a review10.1108/RPJ-11-2015-0178 ↗