journal article·2015-11

Keyhole gas tungsten arc welding of AISI 316L stainless steel

Yueqiao Feng, Zhen Luo, Zuming Liu, Yang Li, Yucan Luo, Yongxian Huang

Materials & Design· Volume 85
Publisher page

Abstract

Abstract Keyhole gas tungsten arc welding (K-TIG) was used to weld AISI 316L stainless steel of mid-thickness (thickness ranging 6–13 mm). 316L plates of 10-mm thickness were jointed using an I-groove in a single pass without filler metal. The effects of welding parameters on the fusion zone profile were investigated. The weld properties, including mechanical properties, microstructure, and corrosion resistance, were analyzed. The primary weld microstructures were austenite and δ-ferrite. The tensile strength and impact property of the weld were almost the same as those of the base metal, while the corrosion resistance of the weld was even better than that of the base metal. High-quality 316L stainless steel joints can be realized through K-TIG welding with high productivity and low processing cost. The practical application of K-TIG welding to join mid-thickness workpieces in industry is well demonstrated and an ideal process for welding AISI 316L of mid-thickness with high efficiency and low cost is presented.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · Hydrogen embrittlement and corrosion behaviors in metals · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Highly efficient TIG welding of Cr13Ni5Mo martensitic stainless steel10.1016/j.jmatprotec.2012.09.025 ↗
2. Effects of oxygen additions to argon shielding gas on GTA weld shape10.2355/isijinternational.43.1590 ↗
3. Performance of activated TIG process in austenitic stainless steel welds10.1016/j.jmatprotec.2010.11.003 ↗
4. Research on the activating flux gas tungsten arc welding and plasma arc welding for stainless steel10.1007/s12540-010-1020-9 ↗
5. The technology and welding joint properties of hybrid laser–TIG welding on thick plate10.1016/j.optlastec.2012.11.014 ↗
6. Comparison of keyhole and conventional gas tungsten arc welds in commercially pure titanium10.1016/S0921-5093(00)01408-8 ↗
7. Development of keyhole mode gas tungsten arc welding process10.1179/136217100322910624 ↗
8. Keyhole gas tungsten arc welding of commercially pure zirconium10.1179/136217108X329296 ↗
9. Jarvis · 2001 · 37
10. Keyhole welding with CF-TIG (cathode focussed GTA)10.1007/s40194-013-0074-y ↗
11. Process parameter optimization of AISI 316L (N) weld joints produced using flux-cored arc welding process10.1007/s12666-012-0233-7 ↗
12. Weld shape variation and electrode oxidation behavior under Ar-(Ar–CO2) double shielded GTA welding10.1016/S1005-0302(10)60028-X ↗
13. Process techniques to improve control of penetration in TIG welding
14. 2008
15. 2008
16. 2008
17. 2005
18. Effect of heat input on the microstructure, residual stresses and corrosion resistance of 304L austenitic stainless steel weldments10.1016/j.matchar.2014.03.013 ↗
19. Effect of laser welding process parameters on microstructure and mechanical properties on butt joint of new hot-rolled nano-scale precipitation-strengthened steel10.1007/s40195-014-0081-z ↗
20. Effect of heat input on macro, micro and tensile properties of flux cored arc welded ferritic stainless steel joints10.1007/s12666-013-0358-3 ↗
21. Corrosion resistance improvement in gas tungsten arc welded 316L stainless steel joints through controlled preheat treatment10.1016/j.matdes.2011.07.071 ↗
22. Small-scale resistance spot welding of austenitic stainless steel
23. Microstructural, compositional and mechanical investigation of shielded metal arc welding (SMAW) welded superaustenitic UNS N08028 (Alloy 28) stainless steel10.1016/j.matdes.2014.06.014 ↗
24. Cai · 2004 · 143
25. Effects of δ-ferrite morphology on low temperature fracture toughness of austenitic stainless steel weld metal10.2207/qjjws.9.525 ↗
26. The effect of repeated repair welding on mechanical and corrosion properties of stainless steel 316L10.1016/j.matdes.2013.08.052 ↗