Introducing a new heterogeneous nanocomposite thin film with superior mechanical properties and thermal stability
Source abstract
Abstract
High entropy alloy (HEA) films offer excellent mechanical properties due to their random solid solution structure. However, their large grain boundary volume fraction can cause thermal instability, resulting in phase decomposition that affects their high-temperature performance. Nevertheless, it remains an interesting question whether phase decomposition can be used as a processing tool to create new HEA materials. In this study, AlCrFeCoNiCu0.5 HEA thin films were fabricated and annealed at 500°C for up to 72 hours. The 72-hour annealed thin film exhibited a 30% increase in mechanical properties, exceeding most other HEA thin films. Characterization using X-ray and electron microscopy revealed a decomposition-induced phase transformation, which produced four new phases, including a Cu-rich FCC phase, Cr-rich BCC phase, and ordered B2 phase of AlNi and FeCo. The enhanced mechanical properties were due to back stress strengthening and BCC+B2 phase strengthening. The 72-hour annealed thin film showed excellent thermal stability through a new round of annealing, exhibiting a low variation in microstructure and chemical composition after being annealed at 500°C for 100 hours.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (74)
Show source-provided references
1. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
2. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
3. Al0.3CrxFeCoNi high-entropy alloys with high corrosion resistance and good mechanical properties10.1016/j.jallcom.2020.158436 ↗
4. High-entropy alloys with heterogeneous microstructure: Processing and mechanical properties10.1016/j.pmatsci.2020.100709 ↗
5. Corrosion-resistant high entropy alloy with high strength and ductility10.1016/j.scriptamat.2019.03.028 ↗
6. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
7. Microstructures and properties of high-entropy alloy films and coatings: A review10.1080/21663831.2018.1434248 ↗
8. High entropy alloy thin films on SS304 substrates: Evolution of microstructure and interface modulated by energetic condensation in nanoscale10.1016/j.matdes.2023.111981 ↗
9. Ultrahigh hardness and high electrical resistivity in nano-twinned, nanocrystalline high-entropy alloy films10.1016/j.apsusc.2018.01.050 ↗
10. Microstructure and properties of coating of FeAlCuCrCoMn high entropy alloy deposited by direct current magnetron sputtering10.1590/1980-5373-MR-2015-0536 ↗
11. Microstructures and mechanical properties of CoCrFeMnNiVx high entropy alloy films10.1016/j.jallcom.2019.153388 ↗
12. Cathodic arc deposition of high entropy alloy thin films with controllable microstructure10.1016/j.surfin.2023.102692 ↗
13. A novel Fe-rich non-equiatomic medium-entropy alloy with superior mechanical properties10.1016/j.jallcom.2023.170029 ↗
14. The Structure Formation and Hardness of High-Entropy Alloy Coatings Obtained by Electrospark Deposition10.1007/s11106-020-00152-7 ↗
15. Microstructure, mechanical, and corrosion resistance properties of Al0.8CrFeCoNiCux high-entropy alloy coatings on aluminum by laser cladding10.1088/2053-1591/ab6c9b ↗
16. Microstructure and Properties of AlCrFeCoNiCux High-Entropy Alloys10.21272/jes.2018.5(1).c3 ↗
17. Enhanced strength of AlCoCrCu0.5FeNi high entropy alloy thin films reinforced by multi-phase hardening and nanotwins10.1016/j.msea.2023.145252 ↗
18. Decomposition in multi-component AlCoCrCuFeNi high-entropy alloy10.1016/j.actamat.2010.09.023 ↗
19. High-entropy alloy: challenges and prospects10.1016/j.mattod.2015.11.026 ↗
20. Phase stability in high entropy alloys: Formation of solid-solution phase or amorphous phase10.1016/S1002-0071(12)60080-X ↗
21. Effect of heat treatment on phase stability and wear behavior of laser clad AlCoCrFeNiTi0.8 high-entropy alloy coatings10.1016/j.surfcoat.2020.125758 ↗
22. Transformations in CrFeCoNiCu high entropy alloy thin films during in-situ annealing in TEM10.3390/coatings10010060 ↗
23. The fabrication and growth mechanism of AlCrFeCoNiCu0.5 HEA thin films by substrate-biased cathodic arc deposition10.1038/s41598-022-26232-9 ↗
24. W.D. Callister, Fundamentals of Materials Science and Engineering: an Integrated Approach., 2000.
25. Nanocrystalline Ag-W alloys lose stability upon solute desegregation from grain boundaries10.1016/j.actamat.2018.09.014 ↗
26. Ultra-strong nanostructured CrMnFeCoNi high entropy alloys10.1016/j.matdes.2020.108895 ↗
27. S. Katakam, S.S. Joshi, S. Mridha, S. Mukherjee, N.B. Dahotre, Laser assisted high entropy alloy coating on aluminum: Microstructural evolution, J. Appl. Phys. 116 (2014). https://doi.org/10.1063/1.4895137.10.1063/1.4895137 ↗
28. Solid-solution CrCoCuFeNi high-entropy alloy thin films synthesized by sputter deposition10.1080/21663831.2015.1048904 ↗
29. The microstructural evolution of dual phase high entropy alloy thin films by annealing10.1016/j.jallcom.2023.170102 ↗
30. Decomposition of the single-phase high-entropy alloy CrMnFeCoNi after prolonged anneals at intermediate temperatures10.1016/j.actamat.2016.04.005 ↗
31. Powder Metallurgical Processing of Crmnfecomo High Entropy Alloy: Phase Evolution, Microstructure, Thermal Stability and Mechanical Properties10.2139/ssrn.4171854 ↗
32. Significant transitions of microstructure and mechanical properties in additively manufactured Al–Co–Cr–Fe–Ni high-entropy alloy under heat treatment10.1016/j.msea.2021.141257 ↗
33. Correlative chemical and structural investigations of accelerated phase evolution in a nanocrystalline high entropy alloy10.1016/j.scriptamat.2020.03.016 ↗
34. C. Li, M. Zhao, J.C. Li, Q. Jiang, B2 structure of high-entropy alloys with addition of Al, J. Appl. Phys. 104 (2008). https://doi.org/10.1063/1.3032900.10.1063/1.3032900 ↗
35. Enthalpies of formation of AlNi: Experiment versus theory10.1361/105497198770342562 ↗
36. Effects of homogenization temperature on cracking during cold-rolling of Al0.5CoCrFeMnNi high-entropy alloy10.1016/j.matchemphys.2017.06.043 ↗
37. Mechano-chemical synthesis, thermal stability and phase evolution in AlCoCrFeNiMn high entropy alloy10.1016/j.jallcom.2018.05.057 ↗
38. Local Composition Migration Induced Microstructural Evolution and Mechanical Properties of Non-equiatomic Fe40Cr25Ni15 Al15Co5 Medium-Entropy Alloy10.1007/s11661-021-06188-7 ↗
39. T. Yamazaki T. Yamamoto Y. Furuya W. Nakao Magnetic and magnetostrictive properties in heat-treated Fe-Co wire for smart material/ device Mech. Eng. J. 5 2018 17–00569-17–00569 10.1299/mej.17-00569.10.1299/mej.17-00569 ↗
40. Advances in processing of NiAl intermetallic alloys and composites for high temperature aerospace applications10.1016/j.paerosci.2015.09.003 ↗
41. Theoretical and experimental study on phase stability of TiVZrMoW refractory high entropy alloy10.1080/14786435.2021.2001066 ↗
42. Powder metallurgical processing of Al matrix composite reinforced with AlSiCrMnFeNiCu high-entropy alloys: Microstructure, thermal stability, and microhardness10.1557/s43578-022-00866-x ↗
43. P. Bayliss, Revised unit-cell dimensions, space group, and chemical formula of some metallic minerals, Can. Mineral. (1990).
44. Crystal structure10.1107/S0365110X65000361 ↗
45. Tailoring heterogeneities in high-entropy alloys to promote strength–ductility synergy10.1038/s41467-019-13311-1 ↗
46. Dynamically reinforced heterogeneous grain structure prolongs ductility in a medium-entropy alloy with gigapascal yield strength10.1073/pnas.1807817115 ↗
47. Hierarchical features infused heterogeneous grain structure for extraordinary strength-ductility synergy10.1080/21663831.2018.1538023 ↗
48. Nanocrystalline high-entropy alloy (CoCrFeNiAl0.3) thin-film coating by magnetron sputtering10.1016/j.tsf.2017.08.006 ↗
49. Processing and characterization of a multibeam sputtered nanocrystalline CoCrFeNi high-entropy alloy film10.1016/j.surfcoat.2020.125465 ↗
50. Nanoindentation mechanical properties of CoCrFeNi high entropy alloy films10.1080/10667857.2021.1921329 ↗
51. Mechanical properties of nanostructured CoCrFeNiMn high-entropy alloy (HEA) coating10.3389/fmats.2018.00041 ↗
52. RF magnetron sputtered AlCoCrCu0.5FeNi high entropy alloy (HEA) thin films with tuned microstructure and chemical composition10.1016/j.jallcom.2020.155348 ↗
53. Microstructure, mechanical and physical properties of FeCoNiAlMnW high-entropy films deposited by magnetron sputtering10.1016/j.apsusc.2019.145131 ↗
54. Microstructure evolution and mechanical properties of atmosphere plasma sprayed AlCoCrFeNi high-entropy alloy coatings under post-annealing10.1016/j.jallcom.2021.159607 ↗
55. Nano- and micro-mechanical properties and corrosion performance of a HVOF sprayed AlCoCrFeNi high-entropy alloy coating10.1016/j.jallcom.2022.165000 ↗
56. Microstructures and mechanical properties of CoCrFeNiAl0.3 high-entropy alloy thin films by pulsed laser deposition10.1016/j.apsusc.2019.07.186 ↗
57. Characteristics of TiVCrAlZr multi-element nitride films prepared by reactive sputtering10.1016/j.nimb.2010.05.039 ↗
58. Effects of nitrogen content on structure and mechanical properties of multi-element (AlCrNbSiTiV)N coating10.1016/j.surfcoat.2009.01.016 ↗
59. Dense and smooth amorphous films of multicomponent FeCoNiCuVZrAl high-entropy alloy deposited by direct current magnetron sputtering10.1016/j.matdes.2012.11.001 ↗
60. Materials selection in design of structures and engines of supersonic aircrafts: A review10.1016/j.matdes.2012.10.001 ↗
61. G. Mahle Pistons and engine testing 1st ed., 2013 Vieweg+Teubner Verlag Wiesbaden 10.1007/978-3-8348-8662-0.
62. Thermodynamic instability of a nanocrystalline, single-phase TiZrNbHfTa alloy and its impact on the mechanical properties10.1016/j.actamat.2017.09.035 ↗
63. Influence of annealing on microstructure and mechanical properties of a nanocrystalline CrCoNi medium-entropy alloy10.3390/ma11050662 ↗
64. A novel low-density semi-hard magnetic Al20Fe20Mg20Ni20Ti20 high entropy alloy10.1016/j.jmmm.2020.167342 ↗
65. The stabilization of nanocrystalline copper by zirconium10.1016/j.msea.2012.08.092 ↗
66. Ordering and grain growth in nanocrystalline Fe75Si 25 alloy10.1016/j.actamat.2004.11.017 ↗
67. A novel low-density, high-hardness, high-entropy alloy with close-packed single-phase nanocrystalline structures10.1080/21663831.2014.985855 ↗
68. Ultrahard BCC-AlCoCrFeNi bulk nanocrystalline high-entropy alloy formed by nanoscale diffusion-induced phase transition10.1016/j.jmst.2021.11.025 ↗
69. Thermal stability and irradiation response of nanocrystalline CoCrCuFeNi high-entropy alloy10.1088/1361-6528/ab1605 ↗
70. Influence of thermal annealing on microstructural, morphological, optical properties and surface electronic structure of copper oxide thin films10.1016/j.matchemphys.2014.06.047 ↗
71. Grain boundary doping strengthens nanocrystalline copper alloys10.1016/j.scriptamat.2012.06.031 ↗
72. Excellent thermal stability and mechanical properties of bulk nanostructured FeCoNiCu high entropy alloy10.1016/j.msea.2022.142670 ↗
73. Effect of Ti on phase stability and strengthening mechanisms of a nanocrystalline CoCrFeMnNi high-entropy alloy10.1016/j.msea.2018.04.014 ↗
74. Effect of annealing on mechanical properties of a nanocrystalline CoCrFeNiMn high-entropy alloy processed by high-pressure torsion10.1016/j.msea.2016.08.118 ↗