Phase transformations in a simulated hot stamping process of the boron bearing steel
Source abstract
Abstract
Abstract A hot stamping process was experimentally simulated by a hot deformation dilatometer to investigate phase transformations and final properties of 22MnB5 boron\bearing steel. For this purpose, the phase fraction in the microstructure of boron bearing steel with and without hot deformation was evaluated. The results showed that mechanical stabilization of austenite during the deformation process led to decreased amount of military phases while bainite and reconstructive transformations, especially ferrite were promoted. But, when there was no martensite in the final microstructure, the effect of deformation on ferrite formation was negligible. Also, due to deformation, total hardness was decreased in cooling rates of higher than 6 °C/s. But, on the contrary, in cooling rates of lower than 6 °C/s, remarkably reverse results were achieved. Finally, the CCT and DCCT diagrams of elaborated steel were constructed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Isothermal versus non-isothermal hot compression process: a comparative study on phase transformations and structure–property relationships10.1016/j.matdes.2012.08.062 ↗
2. Effect of plastic hot deformation on the hardness and continuous cooling transformations of 22MnB5 microalloyed boron steel10.1007/s11661-009-9790-8 ↗
3. The influence of martensite, bainite and ferrite on the as-quenched constitutive response of simultaneously quenched and deformed boron steel — experiments and model10.1016/j.matdes.2013.10.014 ↗
4. Some phase transformations in steels10.1179/026708399773002773 ↗
5. Bhadeshia · 2001 · 203
6. Effect of austenite deformation on continuous cooling transformation microstructures for 22CrSH gear steel10.1016/S1006-706X(07)60015-6 ↗
7. Non-isothermal kinetics model to predict accurate phase transformation and hardness of 22MnB5 boron steel10.1016/j.msea.2014.12.008 ↗
8. Development of ultrafine bainite+martensite duplex microstructure in SAE 52100 bearing steel by prior cold deformation10.1016/j.scriptamat.2009.05.035 ↗
9. Influence of stress on martensitic transformation and mechanical properties of hot stamped AHSS parts10.1016/j.msea.2015.01.056 ↗
10. Influence of deformation temperature on the ferrite grain refinement in a low carbon Nb–Ti microalloyed steel10.1016/j.jmatprotec.2006.04.018 ↗
11. Bainite transformation in deformed austenite10.1007/BF02656591 ↗
12. Application of dilatometric analysis to the study of solid–solid phase transformation10.1016/S1044-5803(02)00259-0 ↗
13. Analysis of the superficial layers by X-rays diffraction method
14. Influence of plastic deformation on CCT diagrams of low carbon and medium carbon TRIP-steels
15. A model for deformation, temperature and phase transformation behavior of steels on run-out table in hot strip mill10.1016/S0924-0136(02)00454-5 ↗
16. The effect of austenite deformation on bainite formation in an alloyed eutectoid steel10.1016/j.msea.2006.02.115 ↗
17. A review on hot stamping10.1016/j.jmatprotec.2010.07.019 ↗
18. A methodology for the prediction of time–temperature–transformation diagrams10.1016/0921-5093(93)90409-8 ↗
19. Characterisation of the flow properties of the quenchenable ultra high strength steel 22MnB510.1016/S0007-8506(07)60404-1 ↗
20. Effect of thermo-mechanical process on the microstructure and secondary-deformation behavior of 22MnB5 steels10.1016/j.jmatprotec.2012.12.012 ↗
21. On the ferrite and bainite transformation in isothermally deformed 22MnB5 steels10.1016/j.msea.2012.04.091 ↗
22. Naderi · 2007
23. The effects of non-isothermal deformation on martensitic transformation in 22MnB5 steel10.1016/j.msea.2007.10.057 ↗
24. Influence of hot plastic deformation and cooling rate on martensite and bainite start temperatures in 22MnB5 steel10.1016/j.msea.2012.01.018 ↗
25. A CCT diagram for an offshore pipeline steel of X70 type
26. Pandi · 1993
27. SALZGITTER · 2005 · 1
28. Effect of non-isothermal deformation of austenite on phase transformation and microstructure of 22SiMn2TiB steel10.1016/j.msea.2011.12.088 ↗
29. Drawing of CCCT diagrams by static deformation and consideration deformation effect on martensite and bainite transformation in NiCrMoV steel10.1016/j.jmatprotec.2007.05.059 ↗
30. Bainite reaction in Fe–Ni–C alloys10.2320/matertrans1989.32.667 ↗
31. Effect of deformation of austenite and cooling rates on transformation microstructures in a Mn–Cr gear steel10.1016/j.matdes.2008.08.021 ↗
32. Effect of hot deformation on phase transformation kinetics of 86CrMoV7 steel10.1016/j.matchar.2006.02.003 ↗
33. Effects of deformation and Mo, Nb, V, Ti on continuous cooling transformation in Cu–P–Cr–Ni–Mo weathering steels10.1016/j.matchar.2008.03.003 ↗
34. Effect of hot deformation on proeutectoid ferrite ledge growth from boundary of undercooled austenite
35. Two constitutive descriptions of boron steel 22MnB5 at high temperature10.1016/j.matdes.2014.07.008 ↗