A transient carbon nanocoating for improved processing efficiency of copper during laser powder bed fusion
Source abstract
Abstract
Laser Powder Bed Fusion (LPBF) of copper faces significant challenges due to copper's high thermal conductivity and low laser absorptivity, leading to melt pool instability, excessive spattering, and poor part quality. To address these issues, this study introduces a novel transient nanocoating strategy that temporarily enhances laser absorption while being designed to vaporise during processing to preserve the purity of the copper. Combined with a defocused laser strategy, this approach achieves a more uniform energy distribution, resulting in a stable melt pool, controlled vapour formation, and minimal spatter. The effectiveness of this synergistic strategy is validated through static and dynamic absorptivity measurements. For the static absorptivity, the coated copper powder absorbs 67% of the input laser power, 3.5 times higher than untreated copper, achieving the highest absorptivity enhancement (147% per 1wt% of additive) reported to date. The dynamic absorptivity is also improved from 12% for untreated copper to 51% for coated copper powder. These advancements not only establish a transformative pathway for the LPBF of copper and other highly reflective metals but also highlight the approach's potential to enhance energy efficiency and promote sustainable manufacturing practices in advanced material processing.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Addicks · 1905 · vol. 36
2. Understanding the photothermal and photocatalytic mechanism of polydopamine coated gold nanorods
3. Investigation on optical absorption and reflection of carbon nanotubes mixed copper composites for laser sintering process improvement10.3390/met13121984 ↗
4. Polydopamine: from adhesion to structure and optical properties of thin films10.1016/j.jcis.2012.07.030 ↗
5. The hydrodynamic permeability and surface property of polyethersulfone ultrafiltration membranes with mussel-inspired polydopamine coatings10.1016/j.memsci.2012.06.045 ↗
6. The use of sacrificial graphite-like coating to improve fusion efficiency of copper in selective laser melting10.3390/ma16062460 ↗
7. 2001
8. Insights into the aggregation/deposition and structure of a polydopamine film10.1021/la5026608 ↗
9. Coating carbon nanotubes by spontaneous oxidative polymerization of dopamine10.1016/j.carbon.2008.06.049 ↗
10. In situ process quality monitoring and defect detection for direct metal laser melting10.1038/s41598-022-12381-4 ↗
11. Research on alloying elements' influence on cuetp-grade copper's mechanical and electrical properties10.3390/ma17123020 ↗
12. Critical review of lpbf metal print defects detection: roles of selective sensing technology10.3390/app14156718 ↗
13. The enhancement of laser absorptivity and properties in laser powder bed fusion manufactured Cu-Cr-Zr alloy by employing Y2O3 coated powder as precursor10.1016/j.jallcom.2022.167111 ↗
14. Influence of carbon nanoparticle addition (and impurities) on selective laser melting of pure copper10.3390/ma12152469 ↗
15. Laser-based powder bed fusion additive manufacturing of pure copper
16. Laser powder bed fusion additive manufacturing of highly conductive parts made of optically absorptive carburized CuCr1 powder10.1016/j.matdes.2020.109369 ↗
17. A copper pyramidal fractal antenna fabricated with green-laser powder bed fusion10.1007/s40964-022-00268-9 ↗
18. Characterization of vapor capillary geometry in laser beam welding of copper with 515 nm and 1030 nm laser beam sources by means of in situ synchrotron X-ray imaging10.3390/met13010135 ↗
19. Fabrication of Cu-CNT composite and Cu using laser powder bed fusion additive manufacturing10.3390/powders1040014 ↗
20. Transient laser energy absorption, co-axial melt pool monitoring, and relationship to melt pool morphology
21. Mussel-inspired surface chemistry for multifunctional coatings10.1126/science.1147241 ↗
22. Laser-induced graphitization of polydopamine leads to enhanced mechanical performance while preserving multifunctionality10.1038/s41467-020-18654-8 ↗
23. Determining processing behaviour of pure Cu in laser powder bed fusion using direct micro-calorimetry
24. Experimental and numerical exploration of defocusing in Laser Powder Bed Fusion (LPBF) as an effective processing parameter10.1016/j.optlastec.2022.107846 ↗
25. High-performance aluminum-based materials processed by laser powder bed fusion: process, microstructure, defects and properties coordination
26. Metal vaporization and its influence during laser powder bed fusion process10.1016/j.matdes.2022.110505 ↗
27. Denudation of metal powder layers in laser powder bed fusion processes10.1016/j.actamat.2016.05.017 ↗
28. On the influence of laser defocusing in selective laser melting of 316l
29. Measures of solid-state material and powder bed absorptivity in the visible and near IR spectrum with new small homemade integrative spheres10.1088/1361-6501/ad691e ↗
30. Design of additive manufactured passive heat sinks for electronics10.1016/j.jmapro.2021.01.035 ↗
31. Dopamine-assisted layer-by-layer deposition providing coatings with controlled thickness, roughness, and functional properties10.1021/acsomega.2c05620 ↗
32. Electrical conductivity of additively manufactured copper and silver for electrical winding applications10.3390/ma15217563 ↗
33. A review of the vaporization behavior of some metal elements in the lpbf process10.3390/mi15070846 ↗
34. Effect of input energy on densification for pure copper fabricated by slm with blue diode laser
35. The interaction of volatile metal coatings during the laser powder bed fusion of copper10.1016/j.jmatprotec.2021.117332 ↗
36. Modification of electrical and mechanical properties of selective laser-melted cucr0.3 alloy using carbon nanoparticles
37. Surface modified copper alloy powder for reliable laser-based additive manufacturing
38. High absorptivity nanotextured powders for additive manufacturing10.1126/sciadv.adp0003 ↗
39. Additive manufacturing of Cu using graphene-oxide-treated powder10.3390/ma16155216 ↗
40. In situ pyrolysis concerted formation of si/c hybrids during molten salt electrolysis of sio2@polydopamine10.1021/acsami.9b00265 ↗
41. Experimental quantification of inward Marangoni convection and its impact on keyhole threshold in laser powder bed fusion of stainless steel
42. Vaporization of alloying elements and explosion behavior during laser powder bed fusion of Cu–10Zn alloy10.1016/j.ijmachtools.2020.103686 ↗
43. Influence of polydopamine coating on the thermal stability of 2, 6-diamino-3, 5-dinitropyrazine-1-oxide explosive under different heating conditions10.1016/j.tca.2020.178530 ↗
44. Cost-effective strategy for surface modification via complexation of disassembled polydopamine with Fe(III) ions10.1021/acs.langmuir.9b00245 ↗
45. Critical instability at moving keyhole tip generates porosity in laser melting10.1126/science.abd1587 ↗
46. Role of W in W-coated Cu powder in enhancing the densification-conductivity synergy of laser powder bed fusion built Cu component10.1016/j.jmatprotec.2023.118169 ↗
47. Enhanced densification of copper during laser powder bed fusion through powder surface alloying10.1016/j.jmatprotec.2022.117575 ↗
48. Laser powder bed fusion of electrically/thermally conductive component by developing inert Cr2O3-coated Cu powder
49. Regulating the absorption spectrum of polydopamine10.1126/sciadv.abb4696 ↗