journal article·2025-09Open access

Homogenization of the melt pool influenced by the local transient thermal conditions using model-based parameter adaption in powder bed fusion

Jana Harbig, Holger Merschroth, Matthias Greiner, Philipp Drossel, Christian Mittelstedt, Matthias Weigold

Materials & Design· Volume 257

Abstract

• Local dimensionless number for predicting the melt pool dimensions with a relative root mean square error of 17.45 %. • Methodological approach to use process monitoring data without precise knowledge of the correlations with the melt pool. • Characterization of local transient thermal conditions due to neighbor tracks. • Homogenization of the melt pool dimensions by local adaption of laser power. Powder Bed Fusion with Laser Beam and Metal (PBF-LB/M) is being increasingly applied in a wide range of industries. The manufacturing process enables an increased lightweight construction potential, an extreme individualization potential and functional integration across all industries. However, a wide range of process influences cause an inhomogeneous process and therefore inhomogeneous properties of the manufactured component. This leads to defects or reduced mechanical properties. One process influence is the scanning strategy, which defines the pattern in the laser scan. Currently used scanning strategies lead to different cooling times of the neighbour melt track when the laser is at a similar position. This leads to local transient thermal conditions. Investigations in this paper show an increase in the melt pool size of 238 %. Therefore, two methods for describing and homogenizing the influence of the local transient thermal conditions on the melt pool are presented. A dimensionless number for predicting and homogenizing the local melt pool geometry is developed. Secondly, a method for local thermal homogenization using process monitoring systems is presented. Process homogenization is achieved by adjusting the laser power. The influence of local transient thermal conditions on the melt pool is reduced by up to 86.8 %.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Injection Molding Process and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. 2021
2. A comprehensive review on laser powder bed fusion of steels: processing, microstructure, defects and control methods, mechanical properties, current challenges and future trends10.1016/j.jmapro.2021.12.033 ↗
3. B.K. Foster, E.W. Reutzel, A.R. Nassar, et al., Hall BT, Brown SW, Dickman CJ. Optical, layerwise monitoring of powder bed fusion. 26th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference 2020:295–307. https://hdl.handle.net/2152/89328.
4. An investigation of the microstructure and fatigue behavior of additively manufactured AISI 316L stainless steel with regard to the influence of heat treatment10.3390/met8040220 ↗
5. Defects in additive manufactured metals and their effect on fatigue performance: a state-of-the-art review10.1016/j.pmatsci.2020.100724 ↗
6. A meltpool prediction based scan strategy for powder bed fusion additive manufacturing
7. A residual heat compensation based scan strategy for powder bed fusion additive manufacturing
8. Effect of interlayer temperature on melt-pool morphology in laser powder bed fusion
9. Iterative simulation-based techniques for control of laser powder bed fusion additive manufacturing
10. Surface topography and melt pool behavior in rapid turnaround regions of laser powder bed fusion additive manufacturing of nickel superalloy 62510.1016/j.cirp.2023.04.024 ↗
11. Residual heat effect on the melt pool geometry during the laser powder bed fusion process10.3390/jmmp6060153 ↗
12. Surface feature characteristics of laser powder bed fusion of nickel super alloy 625 bulk regions10.1016/j.procir.2022.03.083 ↗
13. A. Shkoruta, B. Park, Mishra S. An empirical model for feedforward control of laser powder bed fusion. arXiv preprint arXiv:2201.09978 2022. https://doi.org/10.48550/arXiv.2201.09978.10.1115/1.4064171 ↗
14. Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing10.1016/j.matdes.2016.01.099 ↗
15. In-situ measurement and monitoring methods for metal powder bed fusion: an updated review10.1088/1361-6501/ac0b6b ↗
16. A study of the microstructural evolution during selective laser melting of Ti–6Al–4V10.1016/j.actamat.2010.02.004 ↗
17. Mitigation of lack of fusion defects in powder bed fusion additive manufacturing10.1016/j.jmapro.2018.10.028 ↗
18. Dimensionless numbers in additive manufacturing10.1063/1.4976006 ↗
19. On dimensionless numbers10.1016/j.cherd.2008.03.007 ↗
20. Application of dimensional analysis to selective laser melting10.1108/13552540810841526 ↗
21. Laser spot size and scaling laws for laser beam additive manufacturing
22. Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing10.1016/j.jmatprotec.2014.06.005 ↗
23. Dimensionless enthalpy as characteristic factor for process control in laser powder bed fusion
24. Melt pool controlled laser powder bed fusion for customised low-density lattice structures10.1016/j.matdes.2019.108054 ↗
25. Dimensionless process development for lattice structure design in laser powder bed fusion10.1016/j.matdes.2020.108952 ↗
26. Material and process invariant scaling laws to predict porosity of dense and lattice structures in laser powder bed fusion10.1016/j.matdes.2024.112684 ↗
27. On physically similar systems; illustrations of the use of dimensional equations10.1103/PhysRev.4.345 ↗
28. Simon · 2017
29. In-situ monitoring in L-PBF: opportunities and challenges10.1016/j.procir.2020.09.151 ↗
30. In situ monitoring systems of the SLM process: on the need to develop machine learning models for data processing10.3390/cryst10060524 ↗
31. Investigation of temperature gradient and solidification rate in laser-based powder bed fusion using a high-speed camera to evaluate local microstructure characteristics10.1016/j.cirp.2023.04.031 ↗
32. H. Merschroth, J. van der Kuip, Harbig J, Kniepkamp M. Development of a geometrically based methodology for local process control in powder bed fusion. In: 35th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference 2024:840–853. https://doi.org/10.26153/tsw/58119.