Porous titanium layer co-immobilized with bone morphogenetic protein-2 and vancomycin for biofunctionalization of ultra high molecular weight polyethylene
Source abstract
Abstract
Ultra high molecular weight polyethylene (UHMWPE), a common material for artificial joint linings, lacks appropriate bioactivity and antibacterial property, which could lead to prosthetic loosening and infections after surgery. Herein, a biofunctionalized UHMWPE material was developed by constructing a firmly bonded porous titanium layer on UHMWPE surface through hot-pressing. The micron-scale titanium surface was then activated by tannic acid treatment, and co-immobilized with Bone Morphogenetic Protein-2 and vancomycin. Scanning electron microscopy, mechanical testing, contact angle measurement, X-ray photoelectron spectroscopy analysis, and infrared spectrometry confirmed the successful construction of the coatings on UHMWPE without causing obvious oxidative degradation. The biofunctionalized UHMWPE surface significantly promoted cell adhesion and proliferation, and inhibited bacterial formation in vitro and in vivo. A preliminary in vivo study of canine hip replacement showed that the UHMWPE acetabular cup with the coating had good biocompatibility and promoted new bone formation and integration. These findings support the use of biofunctionalized UHMWPE as promising materials for artificial joint prostheses.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Orthopaedic implants and arthroplasty · Orthopedic Infections and Treatments · Bone Tissue Engineering Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Comparative study on the efficacy of the UHMWPE surface modification by chemical etching and electrostatic spraying method for drug release by orthopedic implants10.1016/j.msec.2019.110117 ↗
2. In vitro and in vivo evaluations of the fully porous Ti6Al4V acetabular cups fabricated by a sintering technique10.1039/C9RA00638A ↗
3. Tribo-material based on a UHMWPE / RGOC biocomposite for using in artificial joints10.1002/app.50768 ↗
4. The importance of particle size in porous titanium and nonporous counterparts for surface energy and its impact on apatite formation10.1016/j.actbio.2009.02.027 ↗
5. Bioactive coatings for orthopaedic implants—recent trends in development of implant coatings10.3390/ijms150711878 ↗
6. Biomimetic UHMWPE/HA scaffolds with rhBMP-2 and erythropoietin for reconstructive surgery10.1016/j.msec.2020.110750 ↗
7. Osseointegration evaluation of UHMWPE and PEEK-based scaffolds with BMP-2 using model of critical-size cranial defect in mice and push-out test10.1016/j.jmbbm.2021.104477 ↗
8. Laser surface modification of ultra-high-molecular-weight polyethylene (UHMWPE) for biomedical applications10.1016/j.apsusc.2014.02.130 ↗
9. Ti, Zr and Ta coated UHMWPE aiming surface improvement for biomedical purposes10.1016/j.compositesb.2020.107909 ↗
10. Development of antimicrobial coatings by atmospheric pressure plasma using a guanidine-based precursor10.1021/am403503a ↗
11. Surface modification of ultra-high molecular weight polyethylene membranes using underwater plasma polymerization10.1007/s11090-013-9476-2 ↗
12. A rugged, self-sterilizing antimicrobial copper coating on ultra-high molecular weight polyethylene: a preliminary study on the feasibility of an antimicrobial prosthetic joint material10.1039/C9TB00440H ↗
13. Surface modification of vascular endothelial growth factor-loaded silk fibroin to improve biological performance of ultra-high-molecular-weight polyethylene via promoting angiogenesis10.2147/IJN.S148845 ↗
14. Preparation of ultrahigh-molecular-weight polyethylene grafted with polyvinyl alcohol hydrogel as an artificial joint10.1039/C5RA00307E ↗
15. Surface modification of CNT reinforced UHMWPE composite for sustained drug delivery10.1016/j.jddst.2019.05.044 ↗
16. Effect of ZnO morphology on affecting bactericidal property of ultra high molecular weight polyethylene biocomposite10.1016/j.msec.2016.02.032 ↗
17. Effects of pore size and porosity on cytocompatibility and osteogenic differentiation of porous titanium10.1007/s10856-021-06548-0 ↗
18. New titanium and titanium/hydroxyapatite coatings on ultra-high-molecular-weight polyethylene-in vitro osteoblastic performance10.1088/1748-6041/5/3/035014 ↗
19. Natural polyphenols enhance stability of crosslinked UHMWPE for joint implants10.1007/s11999-014-3850-0 ↗
20. Development and characterization of biomedical porous Ti–20Nb–5Ag alloy: microstructure, mechanical properties, surface bioactivity and cell viability studies10.1007/s12540-020-00915-2 ↗
21. In Vitro evaluation of biomimetic incorporation and release kinetics of BMP2 on functionalized Bio-Oss® block10.4028/www.scientific.net/KEM.720.7 ↗
22. Synthesis and evaluation of novel glass ceramics as drug delivery systems in osteomyelitis10.1002/jps.23230 ↗
23. Preparation of bioactive Ti and its alloys via simple chemical surface treatment10.1002/(SICI)1097-4636(199611)32:3<409::AID-JBM14>3.0.CO;2-B ↗
24. Mg-Ti composites fabricated by a novel one-step high-pressure sintering: The correlation between microstructures and mechanical properties10.1016/j.compositesb.2021.108743 ↗
25. Pursuit of the correlation between yield strength and crystallinity in sintering-molded UHMWPE10.1016/j.polymer.2020.123352 ↗
26. Mechanical properties and osteoconductivity of porous bioactive titanium10.1016/j.biomaterials.2005.03.019 ↗
27. Finite element analysis of a hemi-pelvis: the effect of inclusion of cartilage layer on acetabular stresses and strain10.1080/10255842.2013.843674 ↗
28. High temperature melted, radiation cross-linked, vitamin E stabilized oxidation resistant UHMWPE with low wear and high impact strength10.1016/j.polymer.2012.11.017 ↗
29. Biological sealing and integration of a fibrinogen-modified titanium alloy with soft and hard tissues in a rat model10.1039/D1BM00762A ↗
30. Simultaneous deposition of tannic acid and poly(ethylene glycol) to construct the antifouling polymeric coating on Titanium surface10.1016/j.colsurfb.2021.111592 ↗
31. Tannic acid-polyethyleneimine crosslinked loose nanofiltration membrane for dye/salt mixture separation10.1016/j.memsci.2019.05.002 ↗
32. Icing delay of sessile water droplets on superhydrophobic titanium alloy surfaces10.1016/j.colsurfa.2021.126587 ↗
33. A one-step tannic acid coating to improve cell adhesion and proliferation on polydimethylsiloxane10.1039/D0NJ02663H ↗
34. Biomaterials approaches to treating implant-associated osteomyelitis10.1016/j.biomaterials.2015.12.012 ↗
35. Potential of bone scaffolds containing vancomycin and bone morphogenetic protein-2 in a rat model of osteomyelitis10.5372/1905-7415.0805.340 ↗
36. Osteoinduction of porous titanium: A comparative study between acid-alkali and chemical-thermal treatments10.1002/jbm.b.31728 ↗
37. Controlled release of BMP-2 from titanium with electrodeposition modification enhancing critical size bone formation10.1016/j.msec.2019.109879 ↗
38. Study of pore morphology, microstructure, and cell adhesion behaviour in porous Ti-6Al-4V scaffolds10.1007/s42247-019-00055-3 ↗
39. Tannic acid: specific form of tannins in cancer chemoprevention and therapy-old and new applications10.1007/s40495-020-00211-y ↗
40. In vitro differentiation of embryonic stem cells into mineralized osteoblasts10.1046/j.1432-0436.2003.700602.x ↗