Delay optimisation of Gradient-Doped Nd: YAG laser ceramics via active mixing of Direct ink writing
Source abstract
Abstract
• The delay optimisation strategy greatly reduces the delay distance by about 20.6 % for the change in volume of the mixing area and 29.0 % − 66.7 % for the change in component switching mode. • Gradient-doped transparent ceramics prepared using the optimised approach obtained a slope efficiency of 67.3%. • Delayed optimisation enables closer alignment of the compositional distribution in the sample to the designed gradient profile. Gradient doping of Nd: YAG (Nd: Y 3 Al 5 O 12 ) can relieve thermal effect during laser operation in solid-state lasers. Direct ink writing (DIW) is an effective method for fabricating gradient-doped structures. However, the delay issue during component switching significantly affects rare-earth ion concentration distribution in the samples, which includes delivery delay and transitional delay. They were respectively optimised by reducing the volume of mixing zone and by modifying component switching mode. Firstly, simulations of the mixing zone before and after optimisation were conducted using ANSYS Fluent to demonstrate the mixing uniformity. Secondly, the processes of component changes during extrusion were simulated to demonstrate the effectiveness of the two delay optimisation methods. Line patterns were printed using DIW with varying mixing zone volumes and component switching modes. The delay optimisation methods were confirmed to significantly reduce the impact of the delay by measuring Nd 3+ ion concentration. Furthermore, a mathematical model was developed to assess the influence of two delay optimisation methods on the delay. Finally, 0–0.5–1–0 at% Nd: YAG gradient-doped laser ceramics were successfully fabricated based on the proposed delay optimisation method, and the performance characterization of the Nd: YAG laser ceramics confirmed the efficacy of the method.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Laser Material Processing Techniques · Photorefractive and Nonlinear Optics · Advanced Optical Imaging Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Progress and perspectives on composite laser ceramics: a review10.1016/j.jeurceramsoc.2021.12.061 ↗
2. Rare earth doped yttrium aluminum garnet (YAG) selective emitters10.1016/S0261-3069(01)00021-8 ↗
3. Metre-scale Y3Al5O12(YAG) transparent ceramics by vacuum reactive sintering10.15541/jim20230374 ↗
4. Nd3+: YAG-Al2O3 nanocrystalline transparent ceramics with high inflexion concentration quenching of Nd3+prepared by amorphous crystallization10.26599/JAC.2024.9220933 ↗
5. Experimental features affecting the transparency of YAG ceramics
6. Koechner · 2006
7. Direct thermal diffusion bonding of Nd: YAG/YAG composite transparent ceramics by vacuum sintering10.1016/j.jeurceramsoc.2017.04.010 ↗
8. A 7.08-kW YAG/Nd: YAG/YAG composite ceramic slab laser with dual concentration doping
9. Three-dimensional printing of transparent ceramics by lithography-based digital projection
10. Direct ink write fabrication of transparent ceramic gain media10.1016/j.optmat.2017.10.005 ↗
11. Near-infrared photothermal dual crosslinking strategy for precise and efficient direct ink writing of high solids ceramic slurries10.1016/j.matdes.2023.112398 ↗
12. A novel experimental approach to quantitatively evaluate the printability of inks in 3D printing using two criteria
13. Fatigue behaviour of titanium scaffolds with hierarchical porosity produced by material extrusion additive manufacturing10.1016/j.matdes.2022.111453 ↗
14. Direct ink writing of aluminium oxynitride (AlON) transparent ceramics from water-based slurries10.1016/j.ceramint.2021.12.014 ↗
15. Micromixers - a review on passive and active mixing principles10.1016/j.ces.2004.11.033 ↗
16. Active mixing of complex fluids at the microscale10.1073/pnas.1509224112 ↗
17. Dual gradient direct ink writing for formation of kaolinite ceramic functionally graded materials10.1016/j.jallcom.2019.152275 ↗
18. Active mixing of reactive materials for 3D printing10.1002/adem.201900147 ↗
19. 3D printed transparent ceramic YAG laser rods: Matching the core-clad refractive index10.1016/j.optmat.2020.110121 ↗
20. Extrusion-based additive manufacturing of functionally graded ceramics10.1016/j.jeurceramsoc.2020.10.029 ↗
21. Humidity-controlled direct ink writing for micro-additive manufacturing with water-based inks10.1016/j.jmapro.2021.07.059 ↗
22. Characterizing material transitions in large-scale
23. Digital prediction method for delay information for preparing FGMs parts by direct write forming
24. Path planning strategy of functionally graded materials printed by material extrusion process
25. Numerical simulation of a dynamic mixing process of ceramic-grade materials for extruded 3D printing
26. Highly stable self-pulsed operation of an Er: Lu2O3 ceramic laser at 2.7 µm10.1088/1612-202X/aa5ced ↗
27. Research on the active mixing printhead for 3D printing gradient-doped laser ceramics
28. Reynolds number in laminar flows and in turbulence10.1063/1.5114728 ↗
29. Spectroscopic and stimulated emission characteristics of Nd3+ in transparent Y2O3 ceramics10.1109/JQE.2006.875868 ↗
30. 3D printing of gradient-doped Yb: YAG laser ceramics by leveraging active mixing
31. High-peak-power electro-optically Q-switched laser with a gradient-doped Nd: YAG crystal10.1364/OL.442131 ↗
32. Fabrication and properties of multistage gradient doping Yb: YAG laser ceramics10.1111/jace.18913 ↗
33. Multilayered YAG - Yb: YAG ceramics: manufacture and laser performance10.1039/C4TC01544D ↗