High-temperature corrosion behavior of Kanthal alloy in molten silver under an oxidizing atmosphere
Source abstract
Abstract
Abstract The high-temperature corrosion behaviors of Kanthal alloy for an anode current-collector were investigated at 1150 °C in molten silver under an oxidizing atmosphere. The hot corrosion products of Kanthal alloy in the gas section were Al2O3 and Al2O3 and FeAl2O4 obtained after 1 d and 3, 5, and 7 d, respectively. Contrarily, only Al2O3 was identified in the liquid silver section. Isolated patches were observed beneath the outer oxide layer in the gas section, whereas there was no evidence of these in the liquid silver section, and a cohesive Ag-rich layer beneath the oxide layer was shown to retard the corrosion by acting as an effective barrier.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Molten salt chemistry and electrochemical processes · Metallurgical Processes and Thermodynamics · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Emerging SOM technology for the green synthesis of metals from oxides10.1007/s11837-001-0053-4 ↗
2. Study on electrolytic reduction with controlled oxygen flow for iron from molten oxide slag containing FeO10.2298/JMMB120112036G ↗
3. Magnesia stabilized zirconia doped with boron, ceria and gadolinia10.1016/j.ceramint.2012.01.035 ↗
4. Primary magnesium production costs for automotive applications10.1007/s11837-008-0151-7 ↗
5. Intermediate temperature solid oxide fuel cells10.1039/b612060c ↗
6. Solid oxide membrane process for magnesium production directly from magnesium oxide10.1007/s11663-005-0037-9 ↗
7. A comparative study on ionic conductivity of Sr and Mg stabilized zirconia by impedance spectroscopy10.1016/j.jeurceramsoc.2005.03.104 ↗
8. The use of solid-oxide-membrane technology for electrometallurgy10.1007/s11837-007-0064-x ↗
9. Direct production of TiAl3 from Ti/Al-containing oxides precursors by solid oxide membrane (SOM) process10.1016/j.jallcom.2017.08.213 ↗
10. Solid oxide membrane process for magnesium production directly from magnesium oxide10.1007/s11663-005-0037-9 ↗
11. Green electrochemical process solid-oxide oxygen-ion-conducting membrane (SOM): direct extraction of Ti-Fe alloys from natural ilmenite10.1007/s11663-012-9633-7 ↗
12. Direct selective extraction of titanium silicide Ti5Si3 from multi-component Ti-bearing compounds in molten salt by an electrochemical process10.1016/j.electacta.2011.07.026 ↗
13. Direct electrochemical preparation of CeNi5 and LaxCe1-xNi5 alloys from mixed oxides by SOM process10.1016/j.electacta.2010.01.008 ↗
14. A direct electrochemical route from oxides to Ti-Si intermetallics10.1016/j.electacta.2010.04.032 ↗
15. Preparation of Ti-Fe based hydrogen storage alloy by SOM method10.1016/j.ijhydene.2010.04.098 ↗
16. A lower carbon footprint process for production of metals from their oxide sources10.1007/s11837-008-0017-z ↗
17. The electrochemical deoxidation of metal oxides by calcium using a solid oxide membrane10.1007/s11837-003-0177-9 ↗
18. Design of optimum solid oxide membrane electrolysis cells for metals production10.1016/j.pnsc.2015.11.004 ↗
19. Solid oxide membrane electrolysis process for aluminum production: experiment and modeling10.1149/2.0571704jes ↗
20. Clean metals production by solid oxide membrane electrolysis process10.1007/s40831-016-0044-x ↗
21. A new anode material for oxygen evolution in molten oxide electrolysis10.1038/nature12134 ↗
22. Direct electrochemical reduction of titanium dioxide to titanium in molten calcium chloride10.1038/35030069 ↗
23. High-temperature oxidation and corrosion of structural materials in molten chlorides10.1023/A:1010333407304 ↗
24. Corrosion performance of ferrous and refractory metals in molten salts under reducing conditions10.1557/JMR.1999.0268 ↗
25. High-temperature oxidation resistance of Al2O3-forming heat-resisting alloys with noble metal and rare earth additions10.1002/maco.201005855 ↗
26. The influence of alloying elements on the development and maintenance of protective scales10.1007/BF01046725 ↗
27. High temperature oxidation and high temperature corrosion of metallic materials: I high temperature oxidation
28. Jones · 1992