journal article·2016-03

Cyclic deformation behaviors of a high strength carbide-free bainitic steel

F.C. Zhang, X.Y. Long, J. Kang, D. Cao, B. Lv

Materials & Design· Volume 94
Publisher page

Abstract

Abstract The cyclic deformation behaviors of low-temperature bainite, lower bainite and upper bainite obtained on a high-strength carbide-free bainitic steel were examined through low-cycle fatigue testing. The relationship between the bainitic microstructure and fatigue behavior was systematically studied using scanning electron microscopy, transmission electron microscopy, atom probe technology, and electron back-scattered diffraction analyses. The results show that low-cycle fatigue undergoes three stages, namely, cyclic hardening, saturation or cyclic softening, and fracturing. The low-temperature bainite exhibits a long fatigue life under the total strain amplitudes, because of its high strength and larger high-angle misorientation distribution of the packets of bainitic ferrite plates. The low-temperature bainite also presents bilinearity in the Coffin–Manson plots. Coordinate deformation and high-uniform elongation lead to prolonged fatigue life at low plastic strain amplitude, whereas phase component primarily affects the fatigue life at high plastic strain amplitude. Highly stable film-like retained austenite is beneficial to arresting fatigue crack propagation. Blocky type retained austenite easily transforms to martensite, resulting in high compatible deformation capability. The hardening ability of the low-temperature bainite is higher than that of the upper bainite, which is attributed to its high pre-existent density of dislocations transformed from movable to immovable during initial hardening stage.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Theoretical design and advanced microstructure in super high strength steels10.1016/j.matdes.2008.08.042 ↗
2. Improving impact toughness of high–C–Cr bearing steel by Si–Mo alloying and low-temperature austempering10.1016/j.matdes.2015.07.055 ↗
3. Microstructure and mechanical properties of a low carbon carbide-free bainitic steel co-alloyed with Al and Si10.1016/j.matdes.2012.02.053 ↗
4. The first bulk nanostructured metal10.1088/1468-6996/14/1/014202 ↗
5. Influence of martensite carbon content on the cyclic properties of dual-phase steel10.1016/0142-1123(81)90020-7 ↗
6. Influence of ferrite–martensite microstructural morphology on the low cycle fatigue of a dual–phase steel10.1016/0142-1123(85)90041-6 ↗
7. Effect of martensite volume fraction on low cycle fatigue behavior of dual phase steels: experimental and microstructural investigation10.1016/j.msea.2015.04.059 ↗
8. Cyclic strain hardening of polygonal and acicular ferrite/bainite microstructures in microalloyed steels in the temperature range—150°C to 27°C10.1016/0142-1123(85)90005-2 ↗
9. Cyclic stress strain relations and strain-controlled fatigue of 4140 steel10.1016/0001-6160(76)90140-1 ↗
10. Fatigue behaviour of microalloyed steels for hot-forged mechanical components10.1016/0142-1123(88)90057-6 ↗
11. Low cycle fatigue behaviour of a 1Cr–Mo–V steel with bainite and ferrite microstructure10.1016/0142-1123(87)90028-4 ↗
12. Fatigue behavior of a multiphase medium carbon V–bearing microalloyed steel processed through two thermomechanical routes10.1016/j.jmatprotec.2008.06.052 ↗
13. Low cycle fatigue behavior of a multiphase microalloyed medium carbon steel: comparison between ferrite–pearlite and quenched and tempered microstructures10.1016/S0921-5093(02)00511-7 ↗
14. Low cycle fatigue behaviour of a multiphase medium carbon microalloyed steel processed through rolling10.1016/S1359-6462(03)00363-4 ↗
15. Low-cycle fatigue behaviour of 34CrNiMo6 high strength steel10.1016/j.tafmec.2012.02.004 ↗
16. Low-cycle fatigue behavior and microstructural evolution in a low-carbon carbide-free bainitic steel10.1016/j.matdes.2015.06.172 ↗
17. Steels for bearings10.1016/j.pmatsci.2011.06.002 ↗
18. Degradation of nanostructured bainitic steel under rolling contact fatigue10.1016/j.msea.2014.08.071 ↗
19. Opening previously impossible avenues for phase transformation in innovative steels by atom probe tomography10.1179/1743284714Y.0000000512 ↗
20. Austenite grain size and the martensite-start temperature10.1016/j.scriptamat.2008.11.043 ↗
21. Rolling contact fatigue property of low-temperature bainite in surface layer of a low carbon steel10.4028/www.scientific.net/MSF.675-677.585 ↗
22. On the role of microstructure in governing the fatigue behaviour of nanostructured bainitic steels10.1016/j.msea.2015.02.016 ↗
23. High-cycle bending fatigue behaviour of nanostructured bainitic steel10.1016/j.scriptamat.2011.11.033 ↗
24. Yu · Mater. Sci. Eng. A · 2009 · 527 · 21210.1016/j.msea.2009.08.024 ↗
25. Carbide-free bainite in medium carbon steel10.1016/j.matdes.2014.07.055 ↗
26. Quantitative measurement of deformation–induced martensite in 304 stainless steel by X-ray diffraction10.1016/j.scriptamat.2004.03.011 ↗
27. Miller · 2000
28. Kinetics of flow and strain-hardening10.1016/0001-6160(81)90112-7 ↗
29. The effect of morphology on the stability of retained austenite in a quenched and partitioned steel10.1016/j.scriptamat.2012.11.003 ↗
30. Effect of microstructure on fatigue behavior of advanced high strength steels produced by quenching and partitioning and the role of retained austenite10.1016/j.msea.2015.06.034 ↗
31. Bhadeshia · 2001
32. Role of microstructure in the low cycle fatigue of multi–phase steels10.1016/j.msea.2011.11.071 ↗
33. Analysis of different acicular ferrite microstructures in low-carbon steels by electron backscattered diffraction. Study of their toughness behavior10.1007/s11661-003-0010-7 ↗
34. On the toughness increment associated with the austenite to martensite phase transformation in TRIP steels10.1007/BF02917542 ↗
35. Strain-induced martensitic transformation in fatigue crack tip zone for a high strength steel10.1016/j.matchar.2005.02.004 ↗
36. Manson · 1954
37. A study of the effects of cyclic thermal stresses on a ductile metal
38. Room temperature deformation mechanisms in Nimonic 80A10.1016/0001-6160(85)90165-8 ↗
39. Three-dimensional atom probe analysis of carbon distribution in low-temperature bainite10.1016/j.scriptamat.2004.02.024 ↗
40. Thermal stability and mechanical properties of ultrafine grained low carbon steel10.1016/S0921-5093(00)01220-X ↗
41. Microstructure and fatigue crack growth behavior in tungsten inert gas welded DP780 dual-phase steel10.1016/j.matdes.2015.06.083 ↗
42. Effects of grain size on fracture toughness in transition temperature region of Mn–Mo–Ni low–alloy steels10.1016/S0921-5093(03)00344-7 ↗