Improving the oxidation behavior of low expansion Ni + CrAlYNO coating systems by regulating the oxygen content
Source abstract
Abstract
Abstract The three duplex coatings comprised inner NiCrAlY layer and outer Ni + CrAlYNO cermet layer, which were referred to as N + 10O, N + 20O and N + 30O based on the oxygen content of flowing into the cermet layer, were prepared by a vacuum arc evaporation machine using a NiCrAlY target. Upon oxidation, the inclusion of YAG inside the alumina and the formation of non-alumina were detected in the N + 10O and N + 20O coatings. In comparison, the N + 30O coating through the slow growth rate and few impurities of TGO appeared superior oxidation resistance. This was mainly due to oxygen content on coatings degradation and Y distribution.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Advanced materials and composites · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Alloys-By-Design: application to nickel-based single crystal superalloys10.1016/j.actamat.2009.08.018 ↗
2. Coupling between Re segregation and γ/γ′ interfacial dislocations during high-temperature, low-stress creep of a nickel-based single-crystal superalloy10.1016/j.actamat.2014.05.033 ↗
3. Effects of Al and Ta on the high temperature oxidation of Ni-based superalloys10.1016/j.corsci.2014.10.025 ↗
4. Phase instabilities and carbon additions in single-crystal nickel-base superalloys10.1016/S0921-5093(02)00637-8 ↗
5. Mechanisms of formation of diffusion aluminide coatings on nickel-base superalloys10.1007/BF00604047 ↗
6. Nickel-based superalloys for advanced turbine engines: chemistry, microstructure, and properties10.2514/1.18239 ↗
7. Thermal barrier coatings for aeroengine applications10.2514/1.20734 ↗
8. Thermal barrier coatings for gas-turbine engine applications10.1126/science.1068609 ↗
9. Current status of thermal barrier coatings — an overview10.1016/0257-8972(87)90003-X ↗
10. Microstructure and composition evolution of a single-crystal superalloy caused by elements interdiffusion with an overlay NiCrAlY coating on oxidation10.1016/j.jmst.2019.11.017 ↗
11. Oxidation failure of TBC systems: an assessment of mechanisms10.1016/j.surfcoat.2011.05.053 ↗
12. On the interfacial degradation mechanisms of thermal barrier coating systems: effects of bond coat composition10.1016/j.actamat.2010.06.027 ↗
13. Oxidation behavior of a nanocrystalline coating with low Ta content at high temperature10.1016/j.corsci.2020.109182 ↗
14. On the role of imperfections in the failure of a thermal barrier coating made by electron beam deposition10.1016/S1359-6454(99)00473-5 ↗
15. Effect of Hf addition in (Ni,Pt)Al bond coat on thermal cycling behavior of a thermal barrier coating system at 1100 °C10.1016/j.corsci.2019.108424 ↗
16. Investigation of the failure mechanism of thermal barrier coatings prepared by electron beam physical vapor deposition10.1016/S0257-8972(00)00693-9 ↗
17. Effect of residual stress on the spallation of the thermally-grown oxide formed on NiCoCrAlY coating10.1016/j.surfcoat.2019.125112 ↗
18. A numerical analysis of oxide spallation10.1098/rspa.1993.0001 ↗
19. Understanding of failure mechanisms of the oxide scales formed on nanocrystalline coatings with different Al content during cyclic oxidation10.1016/j.actamat.2020.116576 ↗
20. Failure and life evaluation of EB-PVD thermal barrier coatings using temperature-process-dependent model parameters10.1016/j.corsci.2019.04.020 ↗
21. Overview on advanced thermal barrier coatings10.1016/j.surfcoat.2010.08.151 ↗
22. Comparison of thermal expansion and oxidation behavior of various high-temperature coating materials and superalloys10.1179/mht.2004.012 ↗
23. Phase constituents and thermal expansion behavior of a NiCrAlYRe coating alloy10.1007/s10853-010-4953-y ↗
24. Development of a low-expansion bond coating for Ni-base superalloys10.1016/0921-5093(94)09589-O ↗
25. Preparation and oxidation behaviour of nanocrystalline Ni + CrAlYSiN composite coating with AlN diffusion barrier on Ni-based superalloy K41710.1016/j.corsci.2012.03.027 ↗
26. Comparison of the cyclic oxidation behavior of a low expansion Ni + CrAlYSiN nanocomposite and a NiCrAlYSiHfSi coating10.1016/j.corsci.2013.11.052 ↗
27. The mechanism of scale adhesion on sputtered microcrystallized CoCrAl films10.1007/BF01046819 ↗
28. Effects of oxygen incorporation in low expansion Ni+CrAlYN nanocomposite coatings on the oxidation behavior10.1016/j.corsci.2020.108550 ↗
29. Oxidation mechanism of Ni+CrAlYNO nanocomposite coating enhanced by a NiCrAlY buffer layer10.1016/j.corsci.2020.109184 ↗
30. Microstructure and oxidation behavior of a Ni+CrAlYSiHfN/AlN multilayer coating fabricated by reactive magnetron sputtering10.1016/j.corsci.2015.12.012 ↗
31. Oxidation mechanism of a nanocrystalline NiCrAlYSiHfN/AlN multilayer coating10.1016/j.corsci.2019.05.009 ↗
32. Effect of nitrogen content on the phase transformation of alumina scale on a nanocrystalline NiCrAlYSiHfN/AlN multilayer coating10.1016/j.corsci.2019.108396 ↗
33. Superior oxidation and spallation resistant NiCoCrAlY bond coat via homogenizing the yttrium distribution10.1016/j.corsci.2019.108145 ↗
34. Y-rich oxide distribution in plasma sprayed MCrAlY-coatings studied by SEM with a cathodoluminescence detector and Raman spectroscopy10.1016/j.surfcoat.2009.08.034 ↗
35. Significantly improving the oxidation and spallation resistance of a MCrAlY alloy by controlling the distribution of yttrium10.1016/j.corsci.2019.03.051 ↗
36. Effect of Y distribution on the oxidation kinetics of NiCoCrAlY bond coat alloys10.1007/s11085-007-9080-z ↗
37. Preparation and oxidation performance of a NiCoCrAlYSiHf + NiAl composite coating deposited by arc ion plating and magnetron sputtering techniques10.1007/s11665-018-3845-1 ↗
38. Comparative study of oxidation and interdiffusion behavior of AIP NiCrAlY and sputtered nanocrystalline coatings on a nickel-based single-crystal superalloy10.1016/j.corsci.2015.05.062 ↗
39. Peg formation by short-circuit diffusion in Al2O3 scales containing oxide dispersions10.1149/1.2124044 ↗
40. Yttrium influence on the alumina growth mechanism on an FeCr23Al5 alloy10.1016/0169-4332(87)90136-X ↗
41. Effect of co-doping of two reactive elements on alumina scale growth of β-NiAl at 1200 °C10.1016/j.corsci.2014.07.036 ↗
42. The effect of surface implantation of yttrium and cerium upon the oxidation behaviour of stainless steels and aluminized coatings at high temperature
43. Y/Hf-doped Al0.7CoCrFeNi high-entropy alloy with ultra oxidation and spallation resistance at 1200 °C10.1016/j.corsci.2020.108803 ↗
44. The effect of yttrium addition on oxidation of a sputtered nanocrystalline coating with moderate amount of tantalum in composition10.1016/j.apsusc.2016.01.088 ↗
45. Effect of yttrium and aluminum additions on isothermal oxidation behavior of Tribaloy T-700 alloys10.1016/j.corsci.2014.07.053 ↗
46. Role of Y during high temperature oxidation of an M-Cr-Al-Y coating on an Ni-base superalloy10.1016/0257-8972(94)90130-9 ↗
47. Optimization of reactive-element additions to improve oxidation performance of alumina-forming alloys10.1111/j.1151-2916.2003.tb03358.x ↗
48. Parameters affecting TGO growth and adherence on MCrAlY-bond coats for TBC’s10.1016/j.surfcoat.2006.07.247 ↗
49. Influence of Al and Y content on the oxidation resistance of CrAlYN protective coatings for high temperature applications: new insights about the Y role10.1016/j.jallcom.2018.09.280 ↗
50. Isothermal and cyclic oxidation behavior of free standing MCrAlY coatings manufactured by high-velocity atmospheric plasma spraying10.1016/j.surfcoat.2017.01.081 ↗
51. Effect of Y distribution on the oxidation kinetics of NiCoCrAlY bond coat alloys10.1007/s11085-007-9080-z ↗
52. Effect of reactive element oxide inclusions on the growth kinetics of protective oxide scales10.1016/j.actamat.2007.07.007 ↗
53. On the microstructure of the initial oxide grown by controlled annealing and oxidation on a NiCoCrAlY bond coating10.1007/s11085-005-8532-6 ↗
54. An Al + Y coating process for improvement of the high-temperature oxidation resistance of a TiAl alloy10.1023/A:1010399825117 ↗
55. Oxidation behaviour of CrAlYN coatings at elevated temperatures10.1016/j.surfcoat.2016.12.030 ↗