Effects of Zn and Ni addition on the oxidation behaviour of 316 SS under simulated BWR conditions
Source abstract
Abstract
The properties of the oxide formed on 316 Stainless Steel (SS) in the presence of metal cations injected into the water (Zn and/or Ni) in low-level Hydrogen Water Chemistry (HWC) of modern Boiling Water Reactors (BWRs) (H:O molar ratio ∼8) at 288°C were evaluated via high spatial resolution microscopy to understand the role of metal cations incorporation into the oxide. These conditions have not been extensively studied in the literature, yet are very important to understand the oxide that forms before the application of the Online NobleChem™ (OLNC). A baseline test was conducted in the absence of metal cation injection into the water. The other tests were conducted in the presence of metal cations: Zn test (Zn = 10 ppb), Ni test (Ni =10 ppb), and Zn+Ni test (Zn =10 ppb, Ni =10 ppb). The study showed that the simultaneous injection of Zn and Ni formed the most protective oxide, followed by the oxide produced under Zn injection. Conversely, the injection of Ni produced an oxide with intermediate properties between those exhibited in Zn-dosed and non-dosed conditions. These results are also validated by Electrochemical Impedance Spectroscopy (EIS) measurements, which provide more macroscopic properties. The increase in protectiveness in the presence of both Zn 2 + and Ni 2+ cations in the water was attributed to the higher degree of spontaneity of the substitution reaction of Ni 2+ with Zn 2+ in the NiCr 2 O 4 inner oxide compared to the substitution reaction of Fe 2+ with Zn 2+ in the FeCr 2 O 4 . • Oxide properties of 316 SS were evaluated under HWC BWR water chemistry. • Cation incorporation analyzed via Analytical S/TEM and oxidation resistance via EIS. • Most protective oxide formed with simultaneous Zn and Ni injection, followed by Zn alone. • 10 ppb Ni injection decreased SS oxidation rate by driving Ni 2+ with Fe 2+ substitution. • Ni injection produced a less protective oxide than Zn due to higher solubility of NiCr 2 O 4 .
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Nuclear Materials and Properties · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. The mechanism of oxide film formation on austenitic stainless steels in high temperature water10.1016/S0010-938X(97)00140-6 ↗
2. Water chemistry in boiling water reactors – a Leibstadt-Specific overview10.2533/000942905777675336 ↗
3. A review of corrosion product transport and radiation field buildup in boiling water reactors10.1016/j.pnucene.2008.05.005 ↗
4. Effects of hydrogen water chemistry on radiation field buildup in BWRs10.1016/0029-5493(96)01196-X ↗
5. Corrosion and corrosion control in light water reactors10.1007/s11837-013-0658-4 ↗
6. Investigation of cobalt deposition behavior with zinc injection on stainless steel under BWR conditions10.1080/18811248.2004.9715533 ↗
7. Investigation of cobalt buildup behavior and suppression by zinc injection on stainless steel under HWC conditions using simultaneous continuous measurements of corrosion and cobalt buildup10.1080/00223131.2014.967323 ↗
8. The mechanism of high temperature aqueous corrosion of stainless steels10.1016/0010-938X(91)90125-9 ↗
9. On the mechanism of sulphide scale formation on iron10.1016/S0010-938X(65)80018-X ↗
10. Stress corrosion cracking (SCC) of austenitic stainless steels in high temperature light water reactor (LWR) environments
11. Analysis of oxide film formed on Type 304 stainless steel in 288°C water containing oxygen, hydrogen, and hydrogen peroxide10.5006/1.3283969 ↗
12. General corrosion of materials under simulated BWR primary water conditions10.1080/18811248.1994.9735174 ↗
13. The effect of high-temperature water chemistry and dissolved zinc on the cobalt incorporation on type 316 stainless steel oxide10.1016/j.corsci.2018.05.041 ↗
14. Electrochemical mitigation of intergranular stress corrosion cracking in boiling water reactors10.5006/1.3280658 ↗
15. Characterization of the oxide film formed on Type 316 stainless steel in 288°C water in cyclic normal and hydrogen water chemistries10.5006/1.3293562 ↗
16. Corrosion behavior of stainless steels in simulated PWR primary water—effect of chromium content in alloys and dissolved hydrogen10.1080/18811248.2008.9711883 ↗
17. Overview of corrosion engineering, science and technology
18. A surface study of the oxidation of type 304L stainless steel at 600 K in air10.1007/BF00666841 ↗
19. The thermodynamics of cation distributions in simple spinels10.1016/0022-1902(67)80008-3 ↗
20. Predictions of cation distributions in AB2O4 spinels from normalized ion energies10.1021/ja00183a001 ↗
21. Thermodynamic analysis and crystallographic properties of MFe2O4, MCr2O4 and MAl2O4 (M = Fe, Ni, Zn) formed on structural materials in pressurized water reactor primary circuit under zinc and zinc-aluminum water chemistry10.3390/e24020245 ↗
22. The distribution of transition metal cations in spinels10.1016/0022-3697(57)90034-3 ↗
23. Zinc treatment effects on corrosion behavior of 304 stainless steel in high temperature, hydrogenated water10.1016/j.corsci.2005.10.014 ↗
24. Influence of Zn injection on characteristics of oxide film on 304 stainless steel in borated and lithiated high temperature water10.1016/j.corsci.2011.06.011 ↗
25. Point defects and transport properties of binary and ternary oxides10.1016/0167-2738(84)90126-7 ↗
26. A chemical diffusion model for partitioning of transition elements in oxide scales on alloys10.1080/14786437208226960 ↗
27. Saito, Takeshi, Radiation Exposure Reduction Technologies for A Japanese Advanced BWR (Dose Rate Reduction Experience in Shika Unit 2). French Nuclear Energy Society - SFEN, “Materials Science and Technology, Non Destructive Testing, Chemistry” Technical Section, 5 rue des Morillons, F-75015 Paris (France), (2012).
28. Synergy effect of simultaneous zinc and nickel addition on cobalt deposition onto stainless steel in oxygenated high temperature water10.1080/18811248.2003.9715344 ↗
29. Effect of nickel ion from autoclave material on oxidation behaviour of 304 stainless steel in oxygenated high temperature water10.1016/j.corsci.2010.12.008 ↗
30. Characterization of oxide film behaviors on 316 stainless steels in high-temperature water – influence of hydrogen and oxygen considerations for initiation of SCC
31. Hydrogen water chemistry for BWRs10.1016/0149-1970(87)90011-4 ↗
32. Effect of dissolved hydrogen on corrosion of 316NG stainless steel in high temperature water10.1016/j.nucengdes.2015.08.030 ↗
33. Effects of hydrogen peroxide on corrosion of stainless steel,(V) characterization of oxide film with multilateral surface analyses10.1080/18811248.2006.9711173 ↗
34. Effects of hydrogen peroxide on intergranular stress corrosion cracking of stainless steel in high temperature water, (V): characterization of oxide film on stainless steel by multilateral surface analyses10.1080/18811248.2002.9715311 ↗
35. Cowan, R.L., and Wood, C.J., Control of radiation fields in BWRs after noble metal chemical addition., in: Chemistry 2002: International Conference on Water Chemistry in Nuclear Reactors Systems - Operation Optimisation and New Developments, France, 2002.
36. Hettiarachchi, S., Worldwide BWR Chemistry Performance with Noble Metal Chemical Addition, in: CORROSION/2002, Houston, TX: NACE, 2002.10.5006/C2002-02508 ↗
37. Effect of machining on stress corrosion crack initiation in warm-forged type 304L stainless steel in high temperature water10.1016/j.actamat.2018.11.046 ↗
38. High-Resolution and Low-Voltage FE-SEM Imaging and Microanalysis in Materials Characterization10.1016/S1044-5803(99)00076-5 ↗
39. A quantitative X-ray microanalysis thin film method using K-, L-, and M-lines10.1016/S0304-3991(81)80234-3 ↗
40. OriginLab Corporation, Origin(Pro)®, (2024).
41. Williams · 2009
42. Stacy Gates-Rector · 2019 · 352
43. Oxidation behaviour of EUROFER-97 under simulated water-cooled breeder blanket conditions
44. Immiscibility in the nickel ferrite–zinc ferrite spinel binary10.1016/j.jpcs.2007.03.025 ↗
45. Effect of surface machining on the corrosion behaviour of 316 austenitic stainless steel in simulated PWR water10.1016/j.corsci.2017.06.019 ↗
46. Electropolishing effects on corrosion behavior of 304 stainless steel in high temperature, hydrogenated water10.1016/j.corsci.2008.06.032 ↗
47. High temperature oxidation and corrosion of metals