Scaling behavior of four Co-20Ni-xCr-yAl (x = 8,15 wt.%; y = 3,5 wt.%) alloys exposed to 1 atm O2 at 1000 °C and 1100 °C
Source abstract
Abstract
Abstract The oxidation of four Co-20Ni-xCr-yAl (x = 8,15 wt.%; y=3,5 wt.%) alloys in 1 atm of pure oxygen was studied at 1000 °C and 1100 °C. All the alloys formed complex scales. The alloy with lowest Cr and Al contents corroded much more rapidly than the other three materials. Incomplete external alumina scales formed only on the alloys containing 5 wt.% Al (at 1100 °C for Co-20Ni-8Cr-5Al and at 1000 °C and 1100 °C for Co-20Ni-15Cr-5Al). More than 5 wt.% Al is required to form continuous external alumina layers on alloys with 8–15 wt.% Cr.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Intermetallics and Advanced Alloy Properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Sims · 1972
2. Lai · 2007
3. Kofstad · 1988
4. New York
5. The influence of alloying elements on the development and maintenance of protective scales10.1007/BF01046725 ↗
6. A comparison of the oxidation behavior of Fe-Cr-Al. Ni-Cr-Al and Co-Cr-Al alloys10.1007/BF00603481 ↗
7. Mapping of the oxidation products in the ternary Co-Cr-Al system10.1007/BF00603522 ↗
8. Selection of an alloy composition in the ternary Co-Cr-Al system for oxidation resistance10.1007/BF00603524 ↗
9. The influence of aluminum additions on the oxidation of Co-Cr alloys at 1000 and 1200 °C10.1007/BF00614630 ↗
10. The oxidation behavior of Co-Cr-Al alloys at 1000 °C10.5006/0010-9312-33.2.56 ↗
11. The oxidation behavior of CoCrAl systems containing active element additions10.1007/BF00609974 ↗
12. Some limiting factors in the use of alloys at high temperatures10.1007/BF00603485 ↗
13. The mechanism of oxidation of Ni-Cr-Al alloys at 1000 °C -1200 °C10.1016/S0010-938X(71)80044-6 ↗
14. Oxidation of Ni-Cr-Al alloys between 1000 °C and 1200 °C10.1149/1.2407837 ↗
15. The oxidation behavior of some Ni-Cr-Al alloys at high temperatures10.1007/BF02643040 ↗
16. Effect of partial oxygen pressure on the initial stages of high-temperature oxidation of γ-NiCrAl alloys10.1179/mht.2003.037 ↗
17. Modelling the thermal oxidation of ternary alloys-compositional changes in the alloy and the development of oxide phases10.1016/S1359-6454(03)00381-1 ↗
18. Promoting exclusive α-Al2O3 growth upon high-temperature oxidation of NiCrAl alloys: experiment versus model predictions10.1016/j.actamat.2004.12.014 ↗
19. Oxide phase development upon high temperature oxidation of γ-NiCrAl alloys10.1002/maco.200503934 ↗
20. Modelling of composition and phase changes in multiphase alloys due to growth of an oxide layer10.1016/j.actamat.2008.06.010 ↗
21. The third-element effect in the oxidation of Ni-xCr-7Al (x=0,5,10,15 at.%) alloys in 1 atm O2 at 900-1000 °C10.1016/j.corsci.2006.03.008 ↗
22. The Effect of Cr on the Oxidation of Ni-10 at.% Al in 1 atm O2 at 900-1000 °C10.1007/s11085-006-9009-y ↗
23. Fundamental factors determining the mode of scaling of heat-resistant alloys10.1002/maco.19710220605 ↗
24. On the reaction mechamism of MCrAlY alloys with oxide-sulfate deposits at 1100 °C10.1007/s11085-016-9649-5 ↗
25. On the simulation of composition profiles in NiCoCrAl alloys during Al2O3 scale growth in oxidation and oxidation-dissolution regimes10.1007/s11085-018-9877-y ↗
26. The development of new bond coat compositions for thermal barrier coating systems operating under industrial gas turbine conditions10.1016/j.surfcoat.2011.06.023 ↗
27. Oxidation behavior of NiCrAl and NiCoCrAl bond coatings under industrial gas turbine conditions10.1007/s11085-013-9446-3 ↗
28. Reed · 2008
29. Cobalt-base high-temperature alloys10.1126/science.1121738 ↗
30. A new polycrystalline Co-Ni superalloy10.1007/s11837-014-1175-9 ↗
31. Influence of Co to Ni ratio in γ’-strengthened model alloys on oxidation resistance and the efficacy of the halogen effect at 900 °C10.1016/j.corsci.2019.05.007 ↗
32. Growth mehanism of oxide scales on two-phase Co/Ni-base model alloys between 800 °C and 900 °C10.1149/1945-7111/ab69f7 ↗
33. High temperature oxidation behavior of γ’-strengthened Co-based superalloys with different Ni additions10.1016/j.corsci.2019.05.036 ↗
34. Evolution of oxides and their microstructures at 800 °C in a γ/γ’ stabilized Co-Ni-Al-Mo-Ta superalloy10.1016/j.corsci.2019.02.013 ↗
35. Alloying effects on oxidation mechanism in polycrystalline Co-Ni base superalloys10.1016/j.corsci.2016.12.009 ↗
36. Intermediate Co/Ni- base model superalloys – thermophysical properties, creep and oxidation10.1016/j.scriptamat.2015.09.018 ↗
37. Al-Co-Cr
38. Al-Cr-Ni ternary phase diagram evaluation
39. Effect of the θ-α-Al2O3 transformation on the oxidation behavior of β-NiAl+Zr10.1007/BF00846690 ↗
40. The oxidation behavior of NiAl-I. Phase transformations in the alumina scale during oxidation of NiAl and NiAl-Cr alloys10.1016/0010-938X(92)90002-K ↗
41. Effect of θ-alumina formation on the growth kinetics of alumina-forming superalloys10.1007/BF01048641 ↗
42. Effect of the θ-α-Al2O3 transformation in scales on oxidation behavior of a nickel-base superalloy with an aluminide diffusion coating10.1023/A:1004654429687 ↗
43. A new kinetics-based approach to quantifying the extent of metastable → stable phase transformation in thermally-grown Al2O3 scales10.1007/s11085-013-9365-3 ↗
44. Effects of minor alloying elements on alumina transformation during the transient oxidation of β-NiAl10.1007/s11085-021-10024-z ↗
45. Diffusion-controlled growth of solid solution scales on nickel-cobalt alloys10.1016/0010-938X(76)90030-5 ↗
46. Oxidation mechanisms for nickel-aluminum alloys at temperatures between 900° and 1300°C
47. The high-temperature oxidation resistance of Co-Al alloys10.1007/BF00611691 ↗