Protective properties of YSZ/Ti film deposited on CoSb 3 thermoelectric material
Source abstract
Abstract
Abstract The YSZ (yttria-stabilized zirconia)/Ti film was deposited on CoSb3 substrate by magnetron sputtering to suppress the sublimation of antimony in CoSb3 during thermal aging test. Both YSZ and Ti film were columnar crystal. The YSZ film typically grew on Ti film in the island mode. No cracks, porosity or other defects were observed on YSZ film. The weight loss per unit area of CoSb3 samples coated with YSZ/Ti film was much lower than that of uncoated CoSb3 sample after accelerated thermal aging test. The results indicated that the sublimation of antimony in CoSb3 was effectively suppressed by YSZ/Ti film.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal Radiation and Cooling Technologies · Thermal properties of materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Nanostructured materials for the thermoelectric applications10.1039/c0cc02627a ↗
2. Recent advances in thermoelectric nanocomposites10.1016/j.nanoen.2011.10.001 ↗
3. Thermoelectric properties and micro-structure characteristics of annealed n-type bismuth telluride thin film10.1016/j.apsusc.2013.04.138 ↗
4. Systematic study of the multiple-element filling in caged skutterudite CoSb310.1021/cm903717w ↗
5. Multiple-filled skutterudites: high thermoelectric figure of merit through separately optimizing electrical and thermal transports10.1021/ja111199y ↗
6. Effect of HPT processing on the structure, thermoelectric and mechanical properties of Sr0.07Ba0.07Yb0.07Co4Sb1210.1016/j.jallcom.2012.05.011 ↗
7. High temperature oxidation behavior of cobalt triantimonide thermoelectric material10.1016/j.jallcom.2010.05.160 ↗
8. Effects of metallic coatings on the performance of skutterudite-based segmented unicouples10.1016/j.enconman.2006.06.008 ↗
9. Thermal cycling effects on the thermoelectric properties of n-type In, Ce-based skutterudite compounds10.1007/s11664-012-1975-z ↗
10. Studies on thermal decomposition and oxidation of CoSb310.1007/s10973-011-1461-5 ↗
11. Protective properties of magnetron-sputtered Cr–Si layers on CoSb310.1007/s11085-010-9209-3 ↗
12. Fabrication and thermal aging behavior of skutterudites with silica-based composite protective coatings10.1016/j.jallcom.2012.02.116 ↗
13. Protective properties of magnetron-sputtered Ti coating on CoSb3 thermoelectric material10.1016/j.apsusc.2014.02.173 ↗
14. Kinetics and mechanism of isothermal oxidation of compositionally graded yttria stabilized zirconia (YSZ) based thermal barrier coating10.1016/j.corsci.2014.06.050 ↗
15. Yttria partially stabilized zirconia as diffusion barrier between NiCrAlY and Ni-based single crystal René N5 superalloy10.1016/j.corsci.2015.01.048 ↗
16. High-temperature oxidation resistance of (Al2O3–Y2O3)/(Y2O3-stabilized ZrO2) laminated coating on 8Nb-TiAl alloy prepared by a novel spray pyrolysis10.1016/j.corsci.2013.08.029 ↗
17. Improvement of adhesion and barrier properties of biomedical stainless steel by deposition of YSZ coating using RF magnetron sputtering10.1016/j.matchar.2014.02.007 ↗
18. Characterization of zirconia films deposited by r.f. magnetron sputtering10.1016/S0921-5107(98)00205-0 ↗
19. Comparison of the structural properties and residual stress of AlN films deposited by dc magnetron sputtering and high power impulse magnetron sputtering at different working pressures10.1016/j.tsf.2013.11.073 ↗
20. Self-limiting growth of strained faceted islands10.1103/PhysRevLett.80.5156 ↗
21. High temperature reliability evaluation of CoSb3/electrode thermoelectric joint10.1016/j.intermet.2008.10.010 ↗
22. High rate thick film growth
23. Yttria-stabilized zirconia thin film electrolyte produced by RF sputtering for solid oxide fuel cell application10.1016/j.matlet.2010.08.016 ↗
24. Growth kinetics of tetragonal and monoclinic ZrO2 crystallites in 3 mol% yttria partially stabilized ZrO2 (3Y-PSZ) precursor powder10.1016/j.jallcom.2014.01.019 ↗
25. Surface morphology evolution of CeO2/YSZ (001) buffer layers fabricated via magnetron sputtering10.1016/j.apsusc.2013.07.072 ↗
26. High temperature sublimation behavior of antimony in CoSb3 thermoelectric material during thermal duration test10.1016/j.jallcom.2010.11.204 ↗
27. Thermal treatment effects on interfacial layer formation between ZrO2 thin films and Si substrates10.1016/j.vacuum.2005.05.004 ↗
28. On the mechanical effects of a nanocrystallisation treatment for ZrO2 oxide films growing on a zirconium alloy10.1016/j.corsci.2012.11.030 ↗
29. Interfacial layer growth of ZrO2 thin films on silicon10.1016/j.vacuum.2007.12.001 ↗
30. Interfacial evolution behavior and reliability evaluation of CoSb3-Ti-MoCu thermoelectric joints during accelerated thermal aging10.1016/j.jallcom.2008.10.037 ↗
31. Microstructure of ZrO2-CeO2 hetero-multi-layer films grown on YSZ substrate10.1016/j.actamat.2005.01.003 ↗
32. The influence of deposition temperature on microstructure and corrosion resistance of ZrOxNy/ZrO2 coatings deposited using RF sputtering10.1016/j.apsusc.2014.04.215 ↗