Corrosion fatigue behavior of dissimilar metal weldments under nominal constant ΔK loading mode in a simulated BWR coolant environment
Source abstract
Abstract
Corrosion fatigue behavior of the dissimilar metal weldment, Alloy 52-A508, under a simulated BWR coolant condition was studied. Corrosion fatigue crack growth rates of the dissimilar metal weldments were observed to increase with crack extension under the nominal constant ΔK loading mode. It could be accounted for by a decrease in the Cr and Ni contents and the crack closure effect with the weld depth. Finite element analysis on the welding residual stress was performed. The trend of analytical results agreed well with that of the residual stress measurements obtained by a hole-drilling strain gauge method.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Hydrogen embrittlement and corrosion behaviors in metals · Non-Destructive Testing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Intergranular environmentally assisted cracking of Alloy 182 weld metal in simulated normal water chemistry of boiling water reactor10.1016/j.corsci.2006.12.022 ↗
2. Q. Peng, T. Shoji, S. Ritter, H.P. Seifert, SCC behavior in the transition region of an Alloy 182-SA 508 Cl.2 dissimilar weld joint under simulated BWR-NWC conditions, in: T.R. Allen, P.J. King, L. Nelson (Eds.), Proceedings of the 12th International Conference on Environmental Degradation of Materials Nuclear Power System–Water Reactors, 2005, pp. 589–599.
3. M. Itow, M. Kikuchi, N. Tanaka, The influence of corrosion potential on SCC growth behavior of a deep crack in Alloy 182 in simulated BWR environment, in: G.S. Was, L. Nelson, P. King (Eds.), Proceedings of the 11th International Conference on Environmental Degradation of Materials in Nuclear Power System–Water Reactors, 2003, pp. 1192–1201.
4. W. Bamford, J. Hall, A review of Alloy 600 cracking in operating nuclear plants: historical experience and future trends, in: G.S. Was, L. Nelson, P. King (Eds.), Proceedings of the 11th International Conference on Environmental Degradation of Materials in Nuclear Power System–Water Reactors, 2003, pp. 1071–1081.
5. S. Fyfitch, D.E. Whitaker, M.L. Arey, CRDM and thermocouple nozzle inspections at the Oconee nuclear station, in: F. Peter Ford, G.S. Was, J.L. Nelson (Eds.), Proceedings of the 10th International Conference on Environmental Degradation of Materials in Nuclear Power Systems–Water Reactor, Lake Tahoe, Nevada, August 5–9, 2001.
6. B. Alexandreanu1, Y. Yang, Y. Chen, W.J. Shack, The stress corrosion cracking behavior of alloys 690 and 152 weld in A PWR environment, in: The 14th International Conference on Environmental Degradation of Materials in Nuclear Power Systems–Water Reactor, Virginia Beach, Virginia, August 23–27, 2009.
7. S.M. Bruemmer, M.B. Toloczko, M.J. Olszta, R. Seffens, P. Efsing, Characterization of defects in alloy 152, 52 and 52M welds, in: The 14th International Conference on Environmental Degradation of Materials in Nuclear Power Systems–Water Reactor, Virginia Beach, Virginia, August 23–27, 2009.
8. M. Ivanchenko, Y. Yagodzinskyy, H. Hänninen, U. Ehrnstén, Dynamic strain aging of Ni-base alloy weld metals in comparison to alloy 600 and 690, in: The 14th International Conference on Environmental Degradation of Materials in Nuclear Power Systems–Water Reactor, Virginia Beach, Virginia, August 23–27, 2009.
9. P.L. Andresen, P.G. Campbell, The effects of crack closure in high temperature water and its role in influencing crack growth data, in: D. Cubicciotti (Eds.), The 4th International Conference on Environmental Degradation of Materials in Nuclear Power Systems–Water Reactor, Jekyll Island, Georgia, August 6–10, 1989, pp. 4-86–4-110.
10. Corrosion fatigue crack growth behavior of low-alloy reactor pressure vessel steels under boiling water reactor conditions10.1016/j.corsci.2008.03.010 ↗
11. Fatigue crack growth behavior of weld heat-affected zone of type 304 stainless steel in high temperature water10.1016/0029-5493(94)90018-3 ↗
12. Environment effects and surface roughness on fatigue crack growth at negative R-ratios10.1016/j.ijfatigue.2007.02.027 ↗
13. Fatigue crack growth behavior of A533B steel in simulated PWR water10.1016/0010-938X(84)90057-X ↗
14. Effects of hydrogen water chemistry on corrosion fatigue behavior of cold-worked 304L stainless steel in simulated BWR coolant environments10.1016/j.jnucmat.2011.01.035 ↗
15. Effect of dynamic strain aging on fatigue crack growth behavior of reactor pressure vessel steels10.1179/174328406X101346 ↗
16. M.P. Connolly, The measurement of regular and irregular surface cracks using the alternating current potential difference technique, in: J.J. Ruschau, J.K. Donald (Eds.), Special Applications and Advanced Techniques for Crack Size Determination, Philadelphia, PA, ASTM, STP 1251, 1995, pp. 3–16.10.1520/STP14674S ↗
17. TECH NOTE, Measurement of residual stresses by the hole-drilling strain gauge method, TN-503-4, Measurements Group, Inc.
18. Fatigue crack-closure under cyclic tension10.1016/0013-7944(70)90028-7 ↗
19. W. Elber, The significance of fatigue crack closure, in: Damage Tolerance in Air Craft Structures, ASTM STP 486, 1971, pp. 230–242.10.1520/STP26680S ↗
20. Fatigue crack growth behavior of Laser-processed 304 stainless steel in air and gaseous hydrogen10.1016/S0010-938X(03)00036-2 ↗
21. The effect of residual thermal stresses on the fatigue crack growth of Laser-surface-annealed AISI 304 stainless, part 1: computer simulation10.1016/j.msea.2003.07.003 ↗
22. The effect of residual thermal stresses on the fatigue crack growth of Laser-annealed 304 stainless steels10.1016/j.matchemphys.2004.07.020 ↗
23. Suresh · 1991
24. Influence of compressive plastic zone at the crack tip upon fatigue crack propagation10.1016/j.ijfatigue.2007.02.013 ↗
25. An experimental study of effect of welding residual stress upon fatigue crack propagation based on observation of crack opening and closure
26. J.E. Allison, The measurement of crack closure during fatigue crack growth, in: D.T. Read, R.P. Reed (Eds.), Fracture Mechanics: Eighteenth Symposium, ASTM STP 945, 1988, pp. 913–933.10.1520/STP23283S ↗
27. Development and manufacturing system of alloy 690 tubing for PWR steam generators
28. G.A. Young, R.A. Etien, M.J. Hackett, J.D. Tucker, T.E. Capobianco, in: The 14th International Conference on Environmental Degradation of Materials in Nuclear Power Systems–Water Reactor, Virginia Beach, Virginia, August 23–27, 2009.