Bidirectional degradation of the Mo diffusion barrier in FeCrAl-coated Zircaloy-4 during steam oxidation above the Fe-Zr eutectic temperature
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Nuclear Materials and Properties · High-Temperature Coating Behaviors · Nuclear reactor physics and engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (93)
Show source-provided references
1. Oxidation, mutual diffusion and crack behaviors of high-throughput prepared CrAl coating on Zry-4 in steam at 1200 °C10.1016/j.corsci.2025.113028 ↗
2. Oxidation behavior of CrAl-Mo coated Zircaloy-4 in DB and BDB scenarios10.1016/j.corsci.2023.111157 ↗
3. Oxidation behavior of CrAl coating with and without Nb addition in high temperature steam environment10.1016/j.jnucmat.2023.154437 ↗
4. Grain boundary-controlled dissolution of Cr coatings on Zr alloy cladding in oxygenated high-temperature water10.1016/j.corsci.2025.113571 ↗
5. Dissolution-driven phase transformation and precipitation in a FeCrNiAl dual-phase HEA exposed to oxygen-deficient LBE10.1016/j.corsci.2026.113624 ↗
6. Systematic investigation of the oxidation behavior of Fe-Cr-Al cladding alloys in high-temperature steam10.1016/j.corsci.2022.110595 ↗
7. An overview of mechanisms of the degradation of promising ATF cladding materials during oxidation at high temperatures
8. Effect of dissolved oxygen on autoclave grid-to-rod fretting corrosion behavior of Cr coated fuel cladding in simulated primary water10.1016/j.corsci.2026.113715 ↗
9. Model development for oxidation and degradation behavior of accident tolerant Cr coating on Zr alloy cladding under high temperature steam atmosphere10.1016/j.jnucmat.2023.154836 ↗
10. Microstructure evolution and oxidation behavior of bi-layer CrAl-Mo coated Zircaloy-4 in steam at 1200 °C and 1300 °C
11. High-temperature steam oxidation behavior and failure mechanisms of Al alloyed Cr coatings on Zr-4 alloy10.1016/j.corsci.2024.111898 ↗
12. Thermo-mechanical analysis of LWR SiC/SiC composite cladding10.1016/j.jnucmat.2014.01.006 ↗
13. Steam Oxidation of Silicon Carbide at High Temperatures for the Application as Accident Tolerant Fuel Cladding, an Overview10.3390/thermo1020011 ↗
14. Uniform corrosion of FeCrAl alloys in LWR coolant environments10.1016/j.jnucmat.2016.06.047 ↗
15. A study of the oxidation of FeCrAl alloy in pressurized water and high-temperature steam environment10.1016/j.corsci.2015.02.027 ↗
16. Characteristic, corrosion and high-temperature steam oxidation behavior of FeCrAl-coated Zr alloy by magnetron sputtering: synergistic effect of deposition temperature and substrate bias10.1016/j.surfcoat.2025.131783 ↗
17. Performance evaluation of accident tolerant Cr-coated Zr alloy cladding under accident conditions based on a refined degradation model10.1016/j.pnucene.2024.105359 ↗
18. Growth kinetics and microstructure characteristics of the Zr-Cr interlayer in a Cr-coated Zry-4 alloy exposed to high-temperature steam10.1016/j.corsci.2023.111600 ↗
19. Autoclave grid-to-rod fretting corrosion behaviors of the Zr alloy fuel cladding with and without Cr coating through advanced characterization10.1016/j.corsci.2024.112379 ↗
20. Evolution of fatigue-induced cracks in Cr-coated Zr alloy cladding in high-temperature steam environment10.1016/j.corsci.2026.113722 ↗
21. Grain boundary-mediated Zr diffusion and Cr2O3 reduction governing steam oxidation degradation in Cr-coated Zr alloy10.1016/j.corsci.2026.113788 ↗
22. Tribolayer evolution and subsurface microstructural transformation in Cr-coated Zr alloy claddings under fretting corrosion in simulated PWR primary water10.1016/j.corsci.2025.113419 ↗
23. Achieving superior mechanical performance in FeCrAl alloys through serrated and pinning-enhanced grain boundaries10.1016/j.jmrt.2025.06.110 ↗
24. Microstructure-dependent volatilization of haynes 230 alloy in ultrahigh vacuum at high temperatures10.1016/j.corsci.2026.113821 ↗
25. High-temperature oxidation of accident tolerant Cr-coated Zr alloy cladding: model development and validation10.1016/j.jnucmat.2025.155621 ↗
26. High-temperature steam corrosion performance of FeCrAl alloys after long-term service in PWR condition: a reliable evaluation and multiscale microstructural characterization10.1016/j.corsci.2026.113747 ↗
27. Anomalous oxidation behavior and enhanced corrosion resistance of a lean-Cr FeCrAl alloy in the oxygenated PWR primary water10.1016/j.corsci.2025.113452 ↗
28. Corrosion behavior of Nb-doped FeCrAl alloy in 500°C steam10.1016/j.corsci.2024.112036 ↗
29. Effect of Nb addition on the steam oxidation behavior and kinetic of FeCrAl alloys10.1016/j.matchar.2024.114115 ↗
30. Microstructure evolution and oxidation resistance properties of oxide dispersion strengthened FeCrAl alloys at 1100 ° C10.1016/j.vacuum.2024.113371 ↗
31. Oxidation behavior of FeCrAl coated Zry-4 under high temperature steam environment10.1016/j.corsci.2019.01.004 ↗
32. Interface reactions and mechanical properties of FeCrAl-coated Zircaloy-410.1016/j.jnucmat.2019.03.004 ↗
33. Effect of molybdenum addition on oxidation behavior and secondary protection mechanism of FeCrAl coatings10.1016/j.matchar.2023.113221 ↗
34. Mitigating grain boundary gd segregation to enhance high-temperature oxidation resistance in Mg-6Gd-1Al alloy: a comparative microstructural study10.1016/j.corsci.2025.113256 ↗
35. Experimental determination of intermetallic phases, phase equilibria, and invariant reaction temperatures in the Fe-Zr system10.1361/105497102770331172 ↗
36. The Fe−Zr (Iron-Zirconium) system10.1007/BF02881963 ↗
37. Behavior of plasma sprayed Cr coatings and FeCrAl coatings on Zr fuel cladding under loss-of-coolant accident conditions10.1016/j.surfcoat.2018.03.016 ↗
38. Improved oxidation resistance of Cr/FeCrAl coating on Zr alloy in high-temperature steam environment10.1016/j.surfcoat.2023.129992 ↗
39. Microstructural evolution of the Cr/FeCrAl coated Zircaloy-4 under simulated PWR and high-temperature steam oxidation environments10.1016/j.jnucmat.2024.155266 ↗
40. Evaluations of Mo-alloy for light water reactor fuel cladding to enhance accident tolerance10.1051/epjn/e2015-50060-7 ↗
41. Improving Accident Tolerance of Nuclear Fuel with Coated Mo-alloy Cladding10.1016/j.net.2015.12.003 ↗
42. Effects of molybdenum on microstructural evolution and mechanical properties in Zr-Nb alloys as nuclear fuel cladding materials10.1080/00223131.2015.1040863 ↗
43. Behavior of an improved Zr fuel cladding with oxidation resistant coating under loss-of-coolant accident conditions10.1016/j.jnucmat.2016.10.021 ↗
44. Development of cold spray process for oxidation-resistant FeCrAl and Mo diffusion barrier coatings on optimized ZIRLO™10.1016/j.jnucmat.2018.05.014 ↗
45. Experimental evaluation of cold spray FeCrAl alloys coated zirconium-alloy for potential accident tolerant fuel cladding
46. Insight into the structure and protective performance of Mo/FeCrAl bilayer coatings on Zry-4 substrates in hydrothermal corrosion and high-temperature steam environment10.1016/j.surfcoat.2025.131733 ↗
47. Effect of Al content and a Cr-N diffusion barrier on the high-temperature steam oxidation of FeCrAl coatings on Zry-410.1016/j.jnucmat.2025.156422 ↗
48. Influence of a Mo interlayer on the oxidation behavior of a Cr coating on a Zr alloy substrate10.1016/j.corsci.2023.111192 ↗
49. High-temperature oxidation of Zr-1Nb zirconium alloy with protective Cr/Mo coating10.1016/j.surfcoat.2022.128459 ↗
50. High-temperature steam oxidation of accident-tolerant Cr/Mo-Coated Zr Alloy at 1200-1400 °C10.3390/coatings13010191 ↗
51. Interfacial evolution in Cr/Mo-coated Zr alloys near the Mo-Zr eutectoid temperature10.1016/j.jnucmat.2024.155406 ↗
52. Microstructure evolution of a Cr-Cr/Mo coated Zr alloys in inert gas and steam environment at high temperature10.1016/j.jnucmat.2023.154845 ↗
53. Complex alloy structures regarded as sphere packings. I. Definitions and basic principles10.1107/S0365110X58000487 ↗
54. Thermal Stability of Intermetallic Phases in Fe-rich Fe-Cr-Ni-Mo Alloys10.1007/s11661-015-2997-y ↗
55. Determination of the Fe-Cr-Mo Phase Diagram at Intermediate Temperatures using Dual-Anneal Diffusion Multiples10.1007/s11669-016-0451-5 ↗
56. Formation and effect of topologically close-packed phases in nickel-base superalloys10.1080/02670836.2016.1187335 ↗
57. High-density metastable annealing twin boundaries-induced extraordinary strain hardening in ultrafine-grained high-entropy alloy10.1016/j.actamat.2025.121205 ↗
58. On the depth resolution of transmission Kikuchi diffraction (TKD) analysis10.1016/j.ultramic.2019.06.003 ↗
59. Microstructures and defect structures in ZrCr2 Laves phase based intermetallic compounds10.1016/S0966-9795(02)00057-2 ↗
60. Early corrosion behaviour of irradiated FeCrAl alloy in a simulated pressurized water reactor environment10.1016/j.corsci.2020.108824 ↗
61. Influence of alloy additions on oxidation
62. Birks · 2006
63. Theoretical analysis of the diffusion processes determining the oxidation rate of alloys10.1149/1.2779605 ↗
64. Types of reactions in the oxidation of alloys
65. Transport processes during the growth of oxide films at elevated temperature10.1103/RevModPhys.57.437 ↗
66. Radiation tolerance of alumina scale formed on FeCrAl ODS ferritic alloy
67. The microstructure of the scale formed during the high temperature oxidation of a fecralloy steel10.1016/0010-938X(84)90036-2 ↗
68. Predicting the oxidation kinetic rate and near-surface microstructural evolution of alumina-forming Ni-based single crystal superalloy based on machine learning10.1016/j.actamat.2024.119703 ↗
69. Oxidation mechanism and kinetics of nuclear-grade FeCrAl alloys in the temperature range of 500-1500 °C in steam10.1016/j.jnucmat.2022.153696 ↗
70. Oxidation of FeCrAl alloy: influence of temperature and atmosphere on scale growth rate and mechanism10.1016/S0257-8972(00)00989-0 ↗
71. Effect of molybdenum on the oxidation resistance of FeCrAl alloy in lower temperature (400 °C) and higher temperature (1200 °C) steam environments10.1016/j.corsci.2024.111870 ↗
72. Role of volatilization of molybdenum oxides during the cyclic oxidation of high-Mo containing Ni-based single crystal superalloys10.1016/j.corsci.2017.08.025 ↗
73. F. Ritzert, D. Arenas, D. Keller, V. Vasudevan, The effect of alloying on topologically close packed phase instability in advanced nickel-base superalloy Rene N6, in: International Symposium on Processing of Metals and Advanced Materials - Modeling, Design and Properties at the 1998 TMS Annual Meeting, Minerals, Metals & Materials Soc, San Antonio, Tx, 1998, pp. 163-174.
74. Reed · Superalloy. Fundam. Appl. · 200610.1017/CBO9780511541285 ↗
75. Insights into the complexities of diffusion-induced grain boundary migration in Fe-Cr-Ni ternary alloys10.1016/j.actamat.2025.121836 ↗
76. Machine learning-assisted design of lightweight refractory high-entropy alloys: a comprehensive review10.1016/j.metadv.2026.01.009 ↗
77. Effects of aluminum on microstructure and mechanical properties of NbTiVZrMo high-entropy alloys at room and elevated temperatures10.1016/j.jallcom.2026.186761 ↗
78. Thermodynamic modeling and experimental study of the Fe-Cr-Zr system10.1016/j.jnucmat.2013.05.061 ↗
79. Protection of zirconium by alumina- and chromia-forming iron alloys under high-temperature steam exposure10.1016/j.jnucmat.2013.03.006 ↗
80. Thermodynamic assessment of the Mo-Zr system10.1361/1054971023604242 ↗
81. Laves phases in the U - Mo - Zr system
82. On diffusion paths with “horns” and the formation of single phase layers in multiphase diffusion couples10.1016/j.actamat.2005.03.027 ↗
83. Direct observation of the nanoscale Kirkendall effect during galvanic replacement reactions10.1038/s41467-017-01175-2 ↗
84. Influence of surface diffusion on the formation of hollow nanostructures induced by the Kirkendall effect: The basic concept10.1021/nl070026p ↗
85. Diffusion of molybdenum in α-iron10.1016/S1359-6454(02)00229-X ↗
86. Diffusion, Mobility and Their Interrelation through Free Energy in Binary Metallic Systems
87. Condensation and Growth of Kirkendall Voids in Intermetallic Compounds10.1109/TCAPT.2008.2010057 ↗
88. Interdiffusion behavior between Cr and Zr and its effect on the microcracking behavior in the Cr-coated Zr-4 alloy10.1007/s41365-021-00977-w ↗
89. J.L. Smialek, N.S. Jacobson, B. Gleeson, D.B. Hovis, A. HeuerOxygen Permeability and Grain-Boundary Diffusion Applied to Alumina Scales, NASA Technical Memorandum2013.
90. Oxidation-resistant environmental barrier coatings for Mo-based alloys: a review10.1002/adem.202001016 ↗
91. Assessment of the impact of Zr-Cr eutectic reaction on the structural integrity of Cr-coated ATF cladding10.1016/j.jnucmat.2025.156166 ↗
92. Sequential δ/γ Interfacial Degradation Induces a Sigmoidal Kinetic Transition in Stress Corrosion Cracking during Superlong-Term Thermal Aging of Duplex Stainless Steel10.1016/j.actamat.2026.122314 ↗
93. Y. Wang, X. Chen, X. Wang, C. Tang, Z. Shen, X. Zeng, Progress in failure mechanisms and modification strategies of nickel-based alloys for molten salt reactors, Acta Metall. Sin., doi:10.11900/0412.1961.2025.00407.