Effect of Si on suppressing dissolution corrosion of AFA steel exposed to LBE at 600°C with 10−6 wt.% oxygen for up to 6000 h via modification of internal oxidation zone
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · High-Temperature Coating Behaviors · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Environmental degradation of structural materials in liquid lead- and lead-bismuth eutectic-cooled reactors10.1016/j.pmatsci.2022.100920 ↗
2. A review of steel corrosion by liquid lead and lead-bismuth10.1016/j.corsci.2009.03.013 ↗
3. Review of the studies on fundamental issues in LBE corrosion10.1016/j.jnucmat.2007.06.019 ↗
4. Experimental studies on active oxygen control performance of solid PbO mass exchanger in liquid lead-bismuth eutectic loop10.1016/j.anucene.2023.109977 ↗
5. Oxygen concentration measurement and control of lead-bismuth eutectic in a small, static experimental facility10.1080/00223131.2019.1700842 ↗
6. Control of dissolved oxygen in liquid LBE by electrochemical oxygen pumping10.1016/j.snb.2014.07.117 ↗
7. Effect of oxygen on corrosion of an alumina-forming duplex steel in static liquid lead-bismuth eutectic at 550°C10.1016/j.corsci.2021.109591 ↗
8. New insights into the corrosion mechanism of 316Ti austenitic steel exposed to 550℃ lead-bismuth eutectic with 5×10−6 wt% and 5×10−7 wt% oxygen concentration10.1016/j.corsci.2024.112449 ↗
9. Long-term corrosion of austenitic steels in flowing LBE at 400C and 10−7 mass% dissolved oxygen in comparison with 450 and 550°C10.1016/j.jnucmat.2015.09.027 ↗
10. Dissolution and oxidation behaviour of various austenitic steels and Ni rich alloys in lead-bismuth eutectic at 520°C10.1016/j.jnucmat.2015.11.005 ↗
11. Comparison of the corrosion behavior of austenitic and ferritic/martensitic steels exposed to static liquid Pb-Bi at 450 and 550°C10.1016/j.jnucmat.2004.07.064 ↗
12. Fe-14Ni-14Cr-2.5Al steel showing excellent corrosion-resistance in flowing LBE at 550°C and high temperature strength10.1016/j.jnucmat.2023.154703 ↗
13. Effect of variation in oxygen concentration in static Pb-Bi eutectic on long-term corrosion performance of Al-alloyed austenitic steels at 500°C10.1016/j.corsci.2021.109963 ↗
14. Long term corrosion resistance of alumina forming austenitic stainless steels in liquid lead10.1016/j.jnucmat.2015.03.011 ↗
15. Corrosion resistance and microstructural stability of austenitic Fe-Cr-Al-Ni model alloys exposed to oxygen-containing molten lead10.1016/j.jnucmat.2019.06.043 ↗
16. Understanding shot peening-enhanced corrosion resistance in AFA steel exposed to LBE with 10−6 wt% oxygen at 600°C: Precipitation-recrystallization interaction in deformation layer10.1016/j.corsci.2025.113439 ↗
17. High-resolution characterization of cold working effects on the oxidation behavior of alumina-forming austenitic (AFA) steel in lead-bismuth eutectic (LBE) with 10−6 wt% oxygen at 600 °C10.1016/j.jnucmat.2025.155691 ↗
18. Effect of phase configuration on corrosion behavior of Fe-20Ni-15Cr-4.5Al alumina-forming austenitic steel in liquid lead-bismuth10.1016/j.jnucmat.2025.155888 ↗
19. Effects of Si addition on the mechanical properties and corrosion resistance to liquid Pb-Bi of 14Cr-ODS alloy10.1016/j.jnucmat.2025.156013 ↗
20. Si and Y co-alloying for superior LBE corrosion resistance through tailored interphases10.1016/j.corsci.2025.113337 ↗
21. Revealing corrosion mechanism of Si-doping 9 wt% Cr F/M steels in oxygen-saturated static and flowing LBE at 550°C10.1016/j.jnucmat.2025.156011 ↗
22. Initial oxidation mechanism of FeCrAl thin films with Nb and Si additions10.1016/j.tsf.2023.140015 ↗
23. Corrosion behavior of Si-enriched steels for nuclear applications in liquid lead-bismuth10.1016/j.jnucmat.2013.02.022 ↗
24. Effect of Si on Mechanical Properties and Oxide Film Formation of AFA Alloy at Low Oxygen Pressure10.3390/coatings15050602 ↗
25. Effects of silicon additions on the oxide scale formation of an alumina-forming austenitic alloy10.1016/j.corsci.2012.08.039 ↗
26. Influence of Silicon and Aluminum Additions on the Oxidation Resistance of a Lean-Chromium Stainless Steel10.1023/A:1015344220073 ↗
27. A comparative study on the corrosion resistance and microstructure stability of Fe-Ni-Cr-Al-Si based austenitic steel in lead-bismuth eutectic with 10−6 wt% oxygen at 600 and 650°C for up to 6000h
28. Precipitation behavior and strengthening mechanism of NbC phase in alumina-forming austenitic steel10.1016/j.msea.2025.148421 ↗
29. Transmission electron microscopy study of complex oxide scales on DIN 1.4970 steel exposed to liquid Pb-Bi eutectic10.1016/j.corsci.2018.10.018 ↗
30. Transmission electron microscopy (TEM) on oxide layers formed on D9 stainless steel in lead bismuth eutectic (LBE)10.1016/j.corsci.2012.09.019 ↗
31. Oxidation behaviour of austenitic stainless steel 304HCu in Advanced Ultra Supercritical (AUSC) steam and the efficacy of shot-peening treatment10.1016/j.corsci.2024.112214 ↗
32. Insights into the preferential intergranular oxidation mechanism of 316L austenitic stainless steel exposed to oxygen saturated lead-bismuth eutectic (LBE)10.1016/j.actamat.2026.121962 ↗
33. The roles of Ni segregation on the oxidation kinetics of austenitic stainless steel 316L exposed to oxygen-containing liquid lead-bismuth eutectic (LBE)10.1016/j.corsci.2024.112644 ↗
34. Corrosion behavior of an alumina forming austenitic steel exposed to supercritical carbon dioxide10.1016/j.corsci.2013.12.023 ↗
35. Revealing the oxidation mechanism of 310S stainless steel in supercritical water via high-resolution characterization10.1016/j.corsci.2022.110212 ↗
36. Understanding corrosion behavior differences of Al-modified and Si-modified austenitic steels in lead-bismuth eutectic with 10−6 wt% oxygen at 600°C for up to 6000h through multiscale characterization10.1016/j.corsci.2025.113099 ↗
37. Oxidation of a Fe-18Cr-8Ni austenitic stainless steel at 850°C in O2: Microstructure evolution during breakaway oxidation10.1016/j.corsci.2016.10.029 ↗
38. Grain boundary diffusion and wetting in the analysis of intergranular penetration10.1016/j.msea.2007.10.107 ↗
39. Dissolution corrosion of 316L austenitic stainless steels in contact with static liquid lead-bismuth eutectic (LBE) at 500°C10.1016/j.jnucmat.2017.04.004 ↗
40. Intergranular precipitation-enhanced wetting and phase transformation in an Al0.4CoCrFeNi high-entropy alloy exposed to lead-bismuth eutectic10.1016/j.corsci.2021.110038 ↗
41. Degradation of tensile mechanical properties of two AlxCoCrFeNi (x=0.3 and 0.4) high-entropy alloys exposed to liquid lead-bismuth eutectic at 350 and 500°C10.1016/j.jnucmat.2021.153364 ↗
42. Liquid metal embrittlement of a dual-phase Al0.7CoCrFeNi high-entropy alloy exposed to oxygen-saturated lead-bismuth eutectic10.1016/j.scriptamat.2020.113652 ↗
43. Barrier effect of intergranular precipitation in alumina-forming austenitic steel against dissolution corrosion exposed to lead-bismuth eutectic10.1016/j.corsci.2024.112643 ↗
44. Nano-scale corrosion mechanism of T91 steel in static lead-bismuth eutectic: A combined APT, EBSD, and STEM investigation10.1016/j.actamat.2024.119883 ↗
45. Synergistic effects of Si and Y on corrosion behavior of cast cladding steels by pre-laying Y powder for nuclear applications in static liquid LBE10.1016/j.jnucmat.2022.153781 ↗
46. Microstructural differences of oxide layer on Si-containing austenitic stainless steel exposed to oxygen-saturated and oxygen-poor LBE10.1016/j.jmrt.2025.05.130 ↗
47. The origin of different morphology of internal oxide precipitates in ferritic and austenitic steels10.1016/j.jmst.2023.03.035 ↗
48. Interfacial engineering of inclusions for synergistic toughening and hydrogen embrittlement resistance in high-strength pipeline steels10.1038/s41529-025-00702-7 ↗
49. R.E. Smallman, A.H.W. Ngan, Surfaces, grain boundaries and interfaces, Mod. Phys. Metall. 8th ed. (2014) 415-442.10.1016/B978-0-08-098204-5.00010-9 ↗
50. High corrosion resistance of twin boundaries in medium-entropy alloy exposed to liquid lead-bismuth eutectic at 500C: Mechanism exploration by both experiment and first-principles calculation10.1016/j.corsci.2022.110865 ↗
51. Asymmetrical defect sink behavior of HCP/BCC Zr/Nb multilayer interfaces: Bubble-denuded zones at Nb layers10.1016/j.actamat.2025.121579 ↗
52. Nanoscale Strain Evolution and Grain Boundary-Mediated Defect Sink Behavior in Irradiated SiC: Insights from N-PED and DFT10.1016/j.actamat.2025.121739 ↗
53. Defect landscape engineering suppresses helium damage in ceramics10.1038/s43246-026-01083-3 ↗