journal article·2026-06Open access

An integrated in-situ HTXRD, Scheil–Gulliver, and CALPHAD approach to investigate solidification, thermal phase stability, and oxidation behaviour in AlₓCrCoFeNi high-entropy alloys (HEAs)

Muhammad Arshad, Saira Bano, Mohamed Amer, Vit Janik, Qamar Hayat, Mingwen Bai

Corrosion Science· Volume 265

Abstract

This study employs an integrated approach combining Scheil–Gulliver model, CALPHAD, and in-situ high-temperature X-ray diffraction (HT-XRD) to investigate the effect of Al on solidification, microstructure development, phase evolution, and oxidation behaviour of AlₓCrCoFeNi (x=0.5, 1.0, 1.8) HEAs. Scheil simulations revealed that increasing Al content reduces the solidification temperature depression (T D ) from 76 °C to 19 °C, showing a transition from non-equilibrium dendritic to near-equilibrium solidification with reduced micro-segregation. The higher temperature depression (76 °C) due to pronounce segregation in lower Al HEAs prevented the development of CALPHAD-predicted equilibrium phases during in-situ HTXRD as opposed to AlCrCoFeNi and Al 1.8 CrCoFeNi with lower T D of 41 °C and 19 °C respectively. CALPHAD predicted oxidation of HEAs supported by in-situ HT-XRD in air confirmed Al preferential oxidation in all compositions while the formation of diffusion control oxide scale found strongly dependent on Al content. The preferential oxidation of Al leads to depletion of ordered B2 phase and the formation of a sublayer of disordered BCC and FCC phases beneath the oxide layer. In lower-Al HEAs, this results in an internally oxidised sublayer with chromia-based top oxide scale, whereas higher-Al HEAs form a dense alumina (Al 2 O 3 ) scale with a preserved sublayer region. • Integrated Scheil–Gulliver, CALPHAD, and in-situ HT-XRD approach applied to AlₓCrCoFeNi HEAs. • Increasing Al content reduced solidification temperature depression from 76 °C to 19 °C. • Higher Al promoted near-equilibrium solidification and hence thermal phase stability. • In-situ HT-XRD validated CALPHAD-predicted interplay between oxides and FCC phase formation. • Oxidation shifted from chromia-based oxides scale to dense alumina with increasing Al content.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
2. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
3. Situ high-temperature X-ray diffraction study of the thermal stability of the Co0. 22Cr0. 23Fe0. 29Ni0. 20Ti0. 06 high-entropy alloy produced by high-energy ball milling10.1002/adem.202401107 ↗
4. Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off10.1038/nature17981 ↗
5. A review on fundamental of high entropy alloys with promising high–temperature properties10.1016/j.jallcom.2018.05.067 ↗
6. Y/Hf-doped Al0. 7CoCrFeNi high-entropy alloy with ultra oxidation and spallation resistance at 1200° C10.1016/j.corsci.2020.108803 ↗
7. Oxidation of Ni-Cr-Al alloys between 1000 and 1200C10.1149/1.2407837 ↗
8. The influence of alloying elements on the development and maintenance of protective scales10.1007/BF01046725 ↗
9. Alloys developed for high temperature applications10.1063/1.4974409 ↗
10. Improving high-temperature oxidation behavior by modifying Al and Co content in Al-Co-Cr-Fe-Ni high-entropy alloy10.1016/j.jmst.2022.04.028 ↗
11. High oxidation resistance of AlCoCrFeNi high entropy alloy through severe shear deformation processing10.1016/j.jallcom.2022.165385 ↗
12. Effect of Al content on the oxidation behavior of Y/Hf-doped AlCoCrFeNi high-entropy alloy10.1016/j.corsci.2020.108691 ↗
13. Understanding phase stability of Al-Co-Cr-Fe-Ni high entropy alloys10.1016/j.matdes.2016.07.073 ↗
14. Influence of process control agent and Al concentration on synthesis and phase stability of a mechanically alloyed AlxCoCrFeMnNi high-entropy alloy10.1016/j.jallcom.2021.160770 ↗
15. Annealing effect for the Al0. 3CoCrFeNi high-entropy alloy fibers10.1016/j.jallcom.2018.11.116 ↗
16. Cooling rate-dependent microstructural evolution: Segregation and precipitated phase in S30432 steel for ultra-supercritical power plants10.1016/j.jmrt.2025.04.002 ↗
17. Influence of electromagnetic field on pure metals and alloys structure
18. A review of electromagnetic stirring on solidification characteristics of molten metal in continuous casting10.1051/metal/2024029 ↗
19. Solidification and Castability of Foundry Alloys
20. Solidification and segregation characteristics of Ni-based superalloy C700R-1 for ultra-supercritical steam turbine rotor10.1016/j.jallcom.2022.165107 ↗
21. 8-equilibrium and scheil-gulliver solidification
22. Distribution of alloying elements in the structure of heat-resistant nickel alloys in secondary carbides10.1007/s10812-020-01075-2 ↗
23. Investigation of phases in Al23Co15Cr23Cu8Fe15Ni16 and Al8Co17Cr17Cu8Fe17Ni33 high entropy alloys and comparison with equilibrium phases predicted by Thermo-Calc10.1016/j.jallcom.2012.11.074 ↗
24. First approach for thermodynamic modelling of the high temperature oxidation behaviour of ternary γ′-strengthened Co–Al–W superalloys10.1016/j.corsci.2014.08.016 ↗
25. Parts per million powder X-ray diffraction10.1021/acs.analchem.5b02758 ↗
26. An understanding of high entropy alloys from phase diagram calculations10.1016/j.calphad.2013.10.006 ↗
27. Gao · 2016
28. Experimental methods in chemical engineering: Thermogravimetric analysis—TGA10.1002/cjce.23673 ↗
29. Determination of parabolic rate constants from a local analysis of mass-gain curves10.1023/A:1018860909826 ↗
30. Microstructure and oxidation behavior of the Y/Ta/Hf co-doped AlCoCrFeNi high-entropy alloys in air at 1100℃10.1016/j.corsci.2022.110930 ↗
31. Eutectic colony formation: a phase-field study10.1103/PhysRevE.66.061608 ↗
32. Effect of Ta and Ni on γ′ phase morphology and compression behavior of Co-8.8 Al-9.8 W superalloys10.1016/j.msea.2022.142739 ↗
33. X-ray diffraction for phase identification in Ti-based alloys: benefits and limitations10.1088/1402-4896/ad4785 ↗
34. Thermodynamic insights into the oxidation mechanisms of CrMnFeCoNi high-entropy alloy using in situ x-ray diffraction10.3390/ma16145042 ↗
35. Precipitation in the equiatomic high-entropy alloy CrMnFeCoNi10.1016/j.scriptamat.2015.10.025 ↗
36. Decomposition of the single-phase high-entropy alloy CrMnFeCoNi after prolonged anneals at intermediate temperatures10.1016/j.actamat.2016.04.005 ↗
37. Sigma-phase in Fe-Cr and Fe-V alloy systems and its physical properties10.1080/10408436.2011.589232 ↗
38. Oxidation Behaviour of Ni–Al and Ni–Cr–Al Alloys in Dry and Wet Oxygen at 750° C
39. Oxidation behaviors and mechanical properties of L12-strengthened high-entropy alloys at 700℃10.1016/j.corsci.2022.110499 ↗
40. Influence of salt spray corrosion on subsequent isothermal oxidation behaviours of AIP NiCoCrAlYSiB coatings10.1016/j.corsci.2008.05.010 ↗
41. Thermodynamic studies on chromium carbides by the electromotive force (emf) method10.1016/S0925-8388(01)01012-X ↗
42. Oxidation behavior of AlCoCrFeNiSix high-entropy alloys at 1100℃10.1016/j.corsci.2021.109633 ↗
43. Oxidation response of a vacuum arc melted NbZrTiCrAl refractory high entropy alloy at 800–1200C10.1016/j.vacuum.2019.01.026 ↗
44. A comprehensive study on the microstructure evolution and oxidation resistance of conventional and nanocrystalline MCrAlY coatings10.1038/s41598-020-79323-w ↗
45. Highly oxidation resistant and cost effective MCrAlY bond coats prepared by controlled atmosphere heat treatment10.1016/j.surfcoat.2018.04.068 ↗
46. Rapid screening of high-entropy alloys using neural networks and constituent elements10.1016/j.commatsci.2021.110755 ↗
47. Nassar · 2022
48. Unraveling the oxidation mechanism of an AlCoCrFeNi high-entropy alloy at 1100° C10.1016/j.corsci.2022.110736 ↗