Effect of aluminum addition on mechanical properties and hydrogen embrittlement sensitivity of medium-Mn steels
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Hydrogen Storage and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (91)
Show source-provided references
1. Significance of control of austenite stability and transformation mechanisms in medium-manganese transformation-induced plasticity steel10.1016/j.msea.2016.08.124 ↗
2. Intercritical rolling induced ultrafine microstructure and excellent mechanical properties of the medium-Mn steel10.1016/j.msea.2013.06.067 ↗
3. Heat treatment effects on the microstructure and mechanical properties of a medium manganese steel (0.2C–5Mn)10.1016/j.msea.2011.11.009 ↗
4. Coupled strengthening in a medium manganese lightweight steel with an inhomogeneously grained structure of austenite10.1016/j.actamat.2014.10.032 ↗
5. Microstructure and deformation behavior of the hot-rolled medium manganese steels with varying aluminum-content10.1016/j.msea.2016.08.119 ↗
6. Effect of two-step intercritical annealing on microstructure and mechanical properties of hot-rolled medium manganese TRIP steel containing δ-ferrite10.1016/j.msea.2017.01.063 ↗
7. Revealing fracture mechanisms of medium manganese steels with and without delta-ferrite10.1016/j.actamat.2018.11.029 ↗
8. Research progress and prospect of medium manganese steel
9. Strain partitioning and mechanical stability of retained austenite10.1016/j.scriptamat.2010.04.020 ↗
10. Stacking fault energy and deformation mechanisms in Fe-xMn-0.6C-yAl TWIP steel10.1016/j.msea.2016.08.106 ↗
11. High dislocation density–induced large ductility in deformed and partitioned steels10.1126/science.aan0177 ↗
12. Increasing yield strength of medium Mn steel by engineering multiple strengthening defects10.1016/j.msea.2018.03.065 ↗
13. Making ultrastrong steel tough by grain-boundary delamination10.1126/science.aba9413 ↗
14. Microstructure-mechanical properties relationships for quenching and partitioning (Q&P) processed steel10.1016/j.actamat.2016.04.048 ↗
15. Near-Ac3 austenitized ultra-fine-grained quenching and partitioning (Q&P) steel10.1016/j.scriptamat.2016.06.003 ↗
16. Kinetics of the partitioning of carbon and substitutional alloying elements during quenching and partitioning (Q&P) processing of medium Mn steel10.1016/j.actamat.2016.01.059 ↗
17. Effect of retained austenite stability and morphology on the hydrogen embrittlement susceptibility in quenching and partitioning treated steels10.1016/j.msea.2016.02.026 ↗
18. Hydrogen influence on some advanced high-strength steels10.1016/j.corsci.2017.06.012 ↗
19. Effects of hydrogen on the properties of iron and steel
20. Effect of hydrogen on the properties and fracture characteristics of TRIP 800 steels10.1016/j.corsci.2011.04.015 ↗
21. Quantification of hydrogen trapping in multiphase steels: Part I – Point traps in martensite10.1016/j.actamat.2020.05.007 ↗
22. The diffusion and trapping of hydrogen in steel10.1016/0001-6160(70)90078-7 ↗
23. Effect of hydrogen content on the embrittlement in a Fe–Mn–C twinning-induced plasticity steel10.1016/j.corsci.2012.03.009 ↗
24. Effect of deformation on hydrogen trapping and effusion in TRIP-assisted steel10.1016/j.actamat.2012.04.010 ↗
25. Effect of hot/warm rolling on the microstructures and mechanical properties of medium-Mn steels10.1016/j.matchar.2020.110682 ↗
26. Quantification of hydrogen trapping in multiphase steels: Part II – Effect of austenite morphology10.1016/j.actamat.2020.07.039 ↗
27. Influence of microstructure on hydrogen embrittlement in hot-rolled medium Mn steels10.1016/j.msea.2020.139147 ↗
28. Hydrogen-assisted decohesion and localized plasticity in dual-phase steel10.1016/j.actamat.2014.01.048 ↗
29. The mechanism of hydrogen embrittlement in intercritically annealed medium Mn TRIP steel10.1016/j.actamat.2016.04.038 ↗
30. Effect of heat treatment processes on hydrogen embrittlement in hot-rolled medium Mn steels10.1016/j.ijhydene.2020.04.241 ↗
31. Hydrogen embrittlement in multilayer steel consisting of martensitic and twinning-induced plasticity steels10.1016/j.msea.2019.04.085 ↗
32. Mechanisms of hydrogen-enhanced localized plasticity: An atomistic study using α-Fe as a model system10.1016/j.actamat.2014.01.008 ↗
33. Study of hydrogen-induced delayed fracture in high-Mn TWIP/TRIP steels during in situ electrochemical hydrogen-charging: Role of microstructure and strain rate in crack initiation and propagation10.1016/j.corsci.2019.108191 ↗
34. Li, Effect of Hydrogen Content and Strain Rate on Hydrogen-induced Delay Cracking for Hot-Stamped Steel10.3390/met9070798 ↗
35. Dependence of hydrogen embrittlement mechanisms on microstructure-driven hydrogen distribution in medium Mn steels10.1016/j.actamat.2019.11.029 ↗
36. Effects of Al addition on deformation and fracture mechanisms in two high manganese TWIP steels10.1016/j.msea.2010.12.085 ↗
37. Effects of Aluminum Addition on Tensile and Cup Forming Properties of Three Twinning Induced Plasticity Steels10.1007/s11661-011-1007-2 ↗
38. Effect of aluminium on hydrogen-induced fracture behaviour in austenitic Fe–Mn–C steel
39. Role of copper and aluminum on the corrosion behavior of austenitic Fe–Mn–C TWIP steels in aqueous solutions and the related hydrogen absorption10.1016/j.corsci.2014.02.018 ↗
40. Hydrogen Embrittlement in trip and twip steels
41. Super-high-strength and formable medium Mn steel manufactured by warm rolling process10.1016/j.actamat.2019.05.043 ↗
42. Comprehensive effect of hydrostatic compressive stress in retained austenite on mechanical properties and hydrogen embrittlement of martensitic steels10.1016/j.ijhydene.2020.06.012 ↗
43. Microstructure effect on hydrogen-induced cracking in TM210 maraging steel10.1016/j.msea.2013.07.097 ↗
44. Characterization of microstructure obtained by quenching and partitioning process in low alloy martensitic steel10.1016/j.msea.2010.02.020 ↗
45. Microstructure and Properties of Laser Surface Melted AISI 316L Stainless Steel10.1007/s11665-024-09461-z ↗
46. Quantification of the effect of transformation-induced geometrically necessary dislocations on the flow-curve modelling of dual-phase steels10.1016/j.ijplas.2012.11.003 ↗
47. Restitution of Prior-Austenite Grain Orientation by Microtexture Analysis of Tempered Martensite Structure in 9Cr-1Mo Ferritic Steel10.4028/www.scientific.net/MSF.702-703.880 ↗
48. The influence of microstructure on the hydrogen embrittlement susceptibility of martensitic advanced high strength steels10.1016/j.mtcomm.2018.07.011 ↗
49. Effect of pre-strain on critical conditions for hydrogen-induced delayed cracking and crack nucleation characteristic of DP1180 steel10.1016/j.corsci.2023.111749 ↗
50. Analysis of hydrogen-induced cracking mechanism in quenching and partitioning steels10.1016/j.corsci.2024.112516 ↗
51. Studies on Mechanical and Electro-Chemical Properties of Laser Direct Energy-Deposited AISI 31610.1007/s11661-024-07517-2 ↗
52. Bone-like crack resistance in hierarchical metastable nanolaminate steels10.1126/science.aal2766 ↗
53. Yong · 2006
54. Micromechanical finite element analysis of strain partitioning in multiphase medium manganese TWIP+TRIP steel10.1016/j.actamat.2016.02.001 ↗
55. Deformation behaviors and cyclic strength assessment of AZ31B magnesium alloy based on steady ratcheting effect10.1016/j.msea.2018.03.023 ↗
56. Discontinuous strain-induced martensite transformation related to the Portevin-Le Chatelier effect in a medium manganese steel10.1016/j.scriptamat.2017.01.022 ↗
57. Damage and fracture of dual-phase steels: Influence of martensite volume fraction10.1016/j.msea.2015.08.073 ↗
58. Damage and fracture of dual-phase steels Influence of martensite
59. Effects of intercritical annealing process on microstructures and tensile properties of cold-rolled 7Mn steel10.1016/j.msea.2016.12.119 ↗
60. Evolution of microstructure and mechanical properties of medium Mn steels during double annealing10.1016/j.msea.2012.02.024 ↗
61. Coincidence of strain-induced TRIP and propagative PLC bands in Medium Mn steels10.1016/j.msea.2017.08.042 ↗
62. High-cycle fatigue behavior of low-C medium-Mn high strength steel with austenite-martensite submicron-sized lath-like structure10.1016/j.msea.2018.01.110 ↗
63. Study of hydrogen release resulting from the transformation of austenite into martensite10.1016/j.msea.2019.03.098 ↗
64. Hydrogen embrittlement behavior induced by dynamic martensite transformation of Ni–Ti superelastic alloy10.1016/j.actamat.2008.12.030 ↗
65. Enhancing the resistance to hydrogen embrittlement of Al-containing medium-Mn steel through heavy warm rolling10.1016/j.scriptamat.2019.02.009 ↗
66. Effect of intercritical annealing time on hydrogen embrittlement of warm-rolled medium Mn steel10.1016/j.msea.2018.04.100 ↗
67. Tempforming in medium-carbon low-alloy steel10.1016/j.jallcom.2011.12.123 ↗
68. A lamellar structured ultrafine grain ferrite-martensite dual-phase steel and its resistance to hydrogen embrittlement10.1016/j.jallcom.2016.12.224 ↗
69. Effect of retained austenite on the hydrogen embrittlement of a medium carbon quenching and partitioning steel with refined microstructure10.1016/j.msea.2016.04.025 ↗
70. Competitive role of film-like austenite and transition carbides on hydrogen embrittlement resistance and impact toughness in bainite-containing quenched and partitioned steel10.1007/s42243-023-00939-z ↗
71. Mitigating hydrogen embrittlement via film-like retained austenite in 2 GPa direct-quenched and partitioned martensitic steels10.1016/j.msea.2024.146872 ↗
72. Thermal stability of retained austenite in TRIP steels studied by synchrotron X-ray diffraction during cooling10.1016/j.actamat.2005.08.017 ↗
73. The influence of the austenite grain size on the microstructural development during quenching and partitioning processing of a low-carbon steel10.1016/j.matdes.2019.107847 ↗
74. Characterization of individual retained austenite grains and their stability in low-alloyed TRIP steels10.1016/j.actamat.2007.08.040 ↗
75. Austenite carbon enrichment and decomposition during quenching and tempering of high silicon high carbon bearing steel10.1016/j.actamat.2023.118742 ↗
76. Role of the nanoscale austenite in micro-strain heterogeneity in PH17-4 martensitic stainless steels10.1016/j.msea.2024.146122 ↗
77. Multiscale in-situ studies of strain-induced martensite formation in inter-critically annealed extra-low-carbon martensitic stainless steel10.1016/j.actamat.2021.117339 ↗
78. Strain partitioning and mechanical stability of retained austenite10.1016/j.scriptamat.2010.04.020 ↗
79. Quantitative assessment of the effects of microstructure on the stability of retained austenite in TRIP steels10.1016/j.actamat.2012.12.010 ↗
80. Analysis of hydrogen trapping behaviour in plastically deformed quenching and partitioning steel in relation to microstructure evolution by phase transformation10.1016/j.jallcom.2022.164018 ↗
81. Hydrogen trapping in some advanced high strength steels10.1016/j.corsci.2016.05.046 ↗
82. Effect of dislocation cell walls on hydrogen adsorption, hydrogen trapping and hydrogen embrittlement resistance10.1016/j.corsci.2020.108428 ↗
83. Effect of pre-strain on hydrogen embrittlement of high strength steels10.1016/j.msea.2014.07.085 ↗
84. Role of ɛ martensite in tensile properties and hydrogen degradation of high-Mn steels10.1016/j.msea.2011.11.039 ↗
85. Revealing hydrogen-induced delayed fracture in ferrite-containing quenching and partitioning steels10.1016/j.mtla.2018.09.022 ↗
86. Hydrogen-assisted decohesion and localized plasticity in dual-phase steel10.1016/j.actamat.2014.01.048 ↗
87. Influence of microstructural parameters on nanohardness of various dual-phase steels: Experiment, Finite Element simulation and Statistical analysis
88. Phase-field theory based finite element analysis for ratchetting behavior of medium-manganese steel10.1016/j.commatsci.2023.112337 ↗
89. Mechanical response of the constrained nanostructured layer in heterogeneous laminate10.1016/j.scriptamat.2021.114310 ↗
90. Improved microstructural homogeneity and mechanical property of medium manganese steel with Mn segregation banding by alternating lath matrix10.1016/j.msea.2017.11.046 ↗
91. Enhancing hydrogen embrittlement resistance of lath martensite by introducing nano-films of interlath austenite10.1007/s11661-015-3009-y ↗