Anticorrosion performance of a Zr-based architectured substrate/coating system
Source abstract
Abstract
After Zr + HiPIMS etching, four Zr-based substrate/coating systems were synthesized on 304L stainless steel by hybrid pulsed DCMS/HiPIMS. SEM-BSE images showed an open columnar structure. The coating effect on corrosion was investigated in nitric acid and compared to tantalum considered as reference material in terms of corrosion behavior. Electrochemical measurements in nitric acid at boiling temperature showed that the corrosion resistance of Zr-based coatings was similar to tantalum (coating and bulk) and better than uncoated 304L steel after 2 d of immersion. Longer immersion tests confirmed these results. No intergranular corrosion was observed on coated samples compared to uncoated 304L.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Kinetics of the oxidation of stainless steel in hot and concentrated nitric acid in the passive and transpassive domains10.1016/j.corsci.2016.02.031 ↗
2. Overview of nuclear materials and nuclear corrosion science and engineering
3. Corrosion issues in nuclear fuel reprocessing plants
4. Improving Corrosion Resistance of 316L Austenitic Stainless Steel Using ZrO2 Sol-Gel Coating in Nitric Acid Solution10.1007/s11665-018-3202-4 ↗
5. Corrosion behavior of Zr-based metallic glass coating on type 304L stainless steel by pulsed laser deposition method10.1016/j.surfcoat.2011.02.039 ↗
6. Synthesis, Characterization and Properties of Zirconium Oxide (ZrO2)-Doped Titanium Oxide (TiO2) Thin Films Obtained via Sol-Gel Process
7. Investigation of structural evolution and electrochemical behaviour of zirconia thin films on the 316L stainless steel substrate formed via sol–gel process
8. Corrosion resistant ZrO2 thin films prepared at room temperature by ion beam induced chemical vapour deposition10.1016/S0257-8972(01)01615-2 ↗
9. Resistance to Corrosion of Zirconia Coatings Deposited by Spray Pyrolysis in Nitrided Steel10.1007/s11666-013-9956-1 ↗
10. Corrosion Behavior of Reactive Sputtered Al2O3 and ZrO2 Thin Films on Mg Disk Immersed in Saline Solution10.1016/j.jmst.2015.07.020 ↗
11. Corrosion and biocompatibility behaviour of zirconia coating by EBPVD for biomedical applications10.1016/j.surfcoat.2017.11.047 ↗
12. A novel pulsed magnetron sputter technique utilizing very high target power densities10.1016/S0257-8972(99)00292-3 ↗
13. Structure and corrosion behavior of ZrN/CrN nano-multilayer coating deposited on AISI 304 stainless steel by CAE-PVD technique10.1080/21870764.2020.1750102 ↗
14. Corrosion performance of ZrN/ZrO2 multilayer coatings deposited on 304 stainless steel using multi-arc ion plating10.1016/j.apsusc.2017.06.273 ↗
15. Multilayer coatings as corrosion protection of Zircaloy10.1016/S0257-8972(96)03001-0 ↗
16. Surface Modification of 304L Stainless Steel and Interface Engineering by HiPIMS Pre-Treatment10.3390/coatings12060727 ↗
17. Microstructure and properties of the Cr-Si-N coatings deposited y combining high-power impulse magnetron sputtering (HiPIMS) and pulsed DC magnetron sputtering10.1007/s40195-017-0609-0 ↗
18. Hybrid HiPIMS and DC magnetron sputtering deposition of TiN coatings: deposition rate, structure and tribological properties10.1016/j.surfcoat.2013.07.003 ↗
19. Properties of TiSiN coatings deposited by hybrid HiPIMS and pulsed-DC magnetron co-sputtering10.1016/j.vacuum.2014.06.023 ↗
20. Corrosion behaviour of zirconium based bulk metallic glasses
21. Select the best alloys to resist nitric acid
22. Comparison of anticorrosion studies of titanium dioxide and nickel oxide thin films fabricated by spray coating technique
23. Influence of the number of bilayers on the mechanical and tribological properties in [TiN/TiCrN]n multilayer coatings deposited by magnetron sputtering10.24874/ti.2019.41.03.03 ↗
24. Corrosion behavior of low-carbon steel coated with different type of TiO2/ZrO2 layers
25. Corrosion resistance of ZrO2-Zr-coated biodegradable surgical magnesium alloy10.1557/JMR.2008.0040 ↗
26. Multilayer Al2O3/TiO2 atomic layer deposition coatings for the corrosion protection of stainless steel10.1016/j.tsf.2012.08.023 ↗
27. Effects of zirconium and oxygen plasma ion implantation on the corrosion behavior of ZK60 Mg alloy in simulated body fluids10.1016/j.corsci.2013.11.044 ↗
28. Corrosion resistance and blood compatibility of lanthanum ion implanted pure iron by MEVVA10.1016/j.apsusc.2009.07.082 ↗
29. Formation of self-layered hydrothermal coating on magnesium aided by titanium ion implantation: synergistic control of corrosion resistance and cytocompatibility10.1016/j.surfcoat.2020.126251 ↗
30. Effects of silicon plasma ion implantation on electrochemical corrosion behavior of biodegradable Mg-Y-RE Alloy10.1016/j.corsci.2012.11.037 ↗
31. The analysis of electrode impedances complicated by the presence of a constant phase element10.1016/S0022-0728(84)80324-1 ↗
32. Electrochemical impedance spectroscopy by Mark E. Orazem and bernard tribollet10.1002/ange.200805564 ↗
33. X-ray photoelectron spectroscopy study of the corrosion behaviour of galvanised steel implanted with rare earths10.1016/S0010-938X(03)00193-8 ↗
34. Contribution of surface distributions to constant-phase-element (CPE) behavior: 1. influence of roughness10.1016/j.electacta.2015.05.010 ↗
35. Investigation of the passive behavior of a Ni-Cr binary alloy using successive electrochemical impedance measurements10.1016/j.electacta.2020.136531 ↗
36. Towards a reliable determination of the intergranular corrosion rate of austenitic stainless steel in oxidizing media10.1016/j.corsci.2016.02.020 ↗
37. Materials development and corrosion problems in nuclear fuel reprocessing plants10.1016/j.pnucene.2005.07.001 ↗
38. Methodology based on potential measurement for predicting corrosion behaviour of SS 304L in boiling nitric acid containing oxidizing ions10.1179/1743278211Y.0000000016 ↗