Effect of Al content on microstructure and oxidation behavior of Si-Al co-deposition coatings on MoSiBTiC alloy
Source abstract
Abstract
Si-Al co-deposition coatings were fabricated on 1st-generation MoSiBTiC alloy by pack cementation. The influence of Al content on the microstructure formation and oxidation behavior of the coatings was investigated experimentally. With the variation of Al content, the phase constitution, microstructure, thickness, and compactness of the coatings were significantly changed. An appropriate addition of Al in the pack enhances the oxidation resistance of MoSi 2 coating at 1300 ℃ due to the preferential oxidation of Al to form alumina, which can simultaneously fill up the cracks, thus preventing the inward diffusion of oxygen along the cracks to the substrate. • Si-Al co-deposition coatings were developed on 1st generation MoSiBTiC alloy. • Al content in the pack obviously affects the characteristics of the MoSi 2 coating. • C40 Mo(Si,Al) 2 coating transformed into C11 b MoSi 2 coating after oxidation. • 1Al coating showed enhanced oxidation resistance at 1300 ℃. • Cracks can be quickly filled by Al 2 O 3 due to the preferential oxidation of Al.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Metal and Thin Film Mechanics · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. Phase equilibria, microstructure, and high-temperature strength of TiC-added Mo-Si-B alloys10.1007/s11661-013-1779-7 ↗
2. Room-temperature fracture toughness of MoSiBTiC alloys10.1016/j.intermet.2017.01.004 ↗
3. Ultrahigh-temperature tensile creep of TiC-reinforced Mo-Si-B-based alloy10.1038/s41598-018-28379-w ↗
4. High-temperature compressive properties of TiC-added Mo-Si-B alloys10.1007/s11837-014-1097-6 ↗
5. Dynamic observation of MoSiBTiC alloy phase transitions using in situ ultrahigh-temperature X-ray diffraction measurement10.1016/j.mtla.2020.100867 ↗
6. Effect of Cr addition on microstructure and oxidation resistance of a Ti5Si3-containing MoSiBTiC alloy10.1016/j.corsci.2019.108418 ↗
7. High-temperature oxidation behavior of a Ti5Si3-incorporated MoSiBTiC alloy10.1016/j.intermet.2020.106895 ↗
8. Signiffcant improvement of the oxidation resistance of MoSiBTiC-based multiphase alloys by Ti enrichment10.1016/j.corsci.2020.108937 ↗
9. Interface reactions of magnetron sputtered Si-based dual layer coating systems as oxidation protection for Mo-Si-Ti alloys10.1016/j.surfcoat.2022.128620 ↗
10. MoSi2 coating on Mo substrate for short-term oxidation protection in air10.1016/j.jallcom.2009.07.141 ↗
11. Formation of MoSi2 and Al doped MoSi2 coatings on molybdenum base TZM (Mo–0.5Ti–0.1Zr–0.02C) alloy10.1016/j.surfcoat.2012.01.062 ↗
12. High temperature environmental resistant Mo-Si-B based coatings10.1016/j.ijrmhm.2017.11.033 ↗
13. Synthesis of oxidation resistant silicide coatings on Mo-Si-B alloys10.1016/j.scriptamat.2005.05.015 ↗
14. Studies on growth mechanism of intermediate layer of (Mo,W)5Si3 and interdiffusion in the (Mo,W)-(Mo,W)Si2 system prepared by pack cementation coating
15. Effect of TiAlN diffusion barrier at MoSi2-SiO2 composite coating/Mo alloy interface
16. Microstructure and oxidation behaviour of MoSi2 coating combined MoB diffusion barrier layer on Mo substrate at 130010.1016/j.ceramint.2020.12.162 ↗
17. Ultra-high temperature oxidation resistance of a novel (Mo,Hf,W,Ti)Si2 ceramic coating with Nb interlayer on Ta substrate10.1016/j.jeurceramsoc.2022.05.009 ↗
18. Effect of minor B modification on the oxidation behavior of MoSi2 alloy at high temperature10.1016/j.corsci.2023.111070 ↗
19. Oxidation behaviour of a MoSiBTiC alloy coated by a (Si+B) co-deposition pack cementation method10.1016/j.corsci.2023.110990 ↗
20. High temperature oxidation and pesting of Mo(Si,Al)210.1016/S0921-5093(97)00673-4 ↗
21. Oxidation kinetics and composite scale formation in the system Mo(Al,Si)10.1111/j.1151-2916.2002.tb00109.x ↗
22. Oxidation behavior of a Mo(Si,Al)2-based composite at 300-1000 ℃10.1016/j.intermet.2009.10.019 ↗
23. Oxidation behaviors and microstructural alterations of a Mo(Si,Al)2-based composite after heating at 1580 ℃ either in a furnace (ex-situ) or via alternating current (in-situ)10.1016/j.jeurceramsoc.2014.08.036 ↗
24. Selective oxidation of aluminium in Mo(Al,Si)210.1016/j.corsci.2022.110884 ↗
25. Oxidation behaviour of a Mo(Si,Al)2 based composite at 150010.1016/j.intermet.2011.05.002 ↗
26. Mo(AlxSi1-x)2 healing particles for high temperature ceramics and encapsulation by selective oxidation of aluminium10.1016/j.matdes.2022.111577 ↗
27. Preparation and corrosion behavior of the Al-modiffed MoSi2/Al2O3 coating on the surface of molybdenum metal core10.1016/j.corsci.2021.109879 ↗
28. In situ chemical vapour co-deposition of Al and Si to form diffusion coatings on TZM10.1016/j.msea.2008.03.020 ↗
29. Oxidation behavior of MoSi2 and Mo(Si,Al)2 coated Mo-0.5Ti-0.1Zr-0.02C alloy10.1016/j.intermet.2010.12.002 ↗
30. Development of Mo(Si,Al)2-MoB composite coatings to protect TZM alloy against oxidation at 1400 °C10.1016/j.intermet.2017.12.002 ↗
31. Deposition and oxidation behavior of Mo(Si,Al)2/MoB layered coatings on TZM alloy10.1016/j.ijrmhm.2017.04.008 ↗
32. Influences of Al content and secondary phase of Mo5(Si,Al)3 on the oxidation resistance of Al-rich Mo(Si,Al)2-base composites10.1016/S0966-9795(03)00072-4 ↗
33. Phase equilibria in the Al-Mo-Si system10.1016/j.intermet.2010.11.010 ↗
34. Oxidation resistance of Mo coated with Mo(Si,Al)2 layer prepared by dipping into liquid of Al-25 mass%Si alloy10.2320/matertrans.46.215 ↗
35. Oxidation behavior of pack-cemented Si-B oxidation protection coatings for Mo-Si-B alloys at 1300 °C10.1016/j.surfcoat.2015.02.015 ↗
36. Deposition of a B-modified silicide coating for Nb-Si based alloy oxidation protection10.1016/j.corsci.2016.06.020 ↗
37. Oxidation behaviour of a Ge-modified silicide coating on an Nb-Si based alloy in the moderate temperature range10.1016/j.corsci.2019.108249 ↗
38. Deposition of Cr-modified silicide coatings on NbeSi system intermetallics10.1016/j.intermet.2006.10.033 ↗
39. Formation of Cr-modified silicide coatings on a Ti-Nb-Si based ultrahigh-temperature alloy by pack cementation process10.1016/j.apsusc.2010.05.091 ↗
40. Friction and wear behaviors of Nb-Ti-Si-Cr based ultrahigh temperature alloy and its Zr-Y jointly modified silicide coatings10.1016/S1003-6326(16)64267-X ↗
41. Structure and oxidation behavior of Si-Y co-deposition coatings on an Nb silicide based ultrahigh temperature alloy prepared by pack cementation technique10.1016/j.surfcoat.2009.07.031 ↗
42. Effect of Al content on the structure and oxidation resistance of Y and Al modified silicide coatings prepared on Nb-Ti-Si based alloy10.1016/j.corsci.2013.01.010 ↗
43. A comparative study of two kinds of Y and Al modified silicide coatings on an Nb-Ti-Si based alloy prepared by pack cementation technique10.1016/j.corsci.2011.08.040 ↗
44. Y and Al modified silicide coatings on an Nb-Ti-Si based ultrahigh temperature alloy prepared by pack cementation process10.1016/j.surfcoat.2011.07.056 ↗
45. Aluminide and silicide diffusion coatings by pack cementation for Nb-Ti-Al alloy10.1016/j.surfcoat.2020.125675 ↗
46. The role of Dy doping on cyclic oxidation behavior of Al-Si coating on new cobalt-based γ/γ′ superalloy10.1016/j.corsci.2021.110077 ↗
47. Synthesis and kinetic study of Mo(Si,Al)2 coatings on the surface of molybdenum through hot dipping into a commercial Al-12 wt%Si alloy melt
48. Fabrication and growth mechanism of Al-Si coatings deposited on Mo substrate by hot dip plating technology
49. Low-temperature oxidation behavior and mechanism of hot-dip Al and Al–Si coatings on Mo substrate at 600 ℃ in static air10.1016/j.ijrmhm.2024.106831 ↗
50. Magnetron sputtered Mo(Six,Al1-x)2 oxidation protection coatings for Mo-Si-B alloys10.1007/s11085-015-9545-4 ↗
51. Characterization of microstructure and oxidation behavior of Al modified MoSi2 coating on Nb-Si based alloy Surf
52. Synthesis, protection performance, and failure analysis of α-Al2O3/Mo(Si,Al)2 coatings10.1016/j.surfcoat.2023.130091 ↗
53. Formation mechanism and oxidation performance for a novel Mo(Si,Al)2 coating prepared using a modified pack cementation strategy10.1016/j.surfcoat.2024.131574 ↗
54. Preparation and firing of a TiC/Si powder mixture10.1088/1757-899X/5/1/012016 ↗
55. Codeposition of Al and Si to form oxidation-resistant coatings on γ-TiAl by the pack cementation process10.1016/S0254-0584(02)00551-5 ↗
56. Structure of Al-modified silicide coatings on an Nb-based ultrahigh temperature alloy prepared by pack cementation techniques10.1016/j.surfcoat.2008.10.018 ↗
57. Co-deposition of Si and B to form oxidation-resistant coatings on an Nb-Ti-Si based ultrahigh temperature alloy by pack cementation technique10.1016/j.corsci.2015.01.013 ↗
58. Alloy designs for high temperature Mo-base systems10.1016/j.ijrmhm.2023.106199 ↗
59. Comparative study on high-temperature oxidation behavior of MoSi2 and MoSi2/SiC-Mo2C composite coatings on Mo substrates at 1300 ℃10.1016/j.surfcoat.2023.129359 ↗
60. Characterization of microstructure and oxidation resistance of Y and Ge modified silicide coating on Nb-Si based alloy10.1016/j.corsci.2016.04.026 ↗
61. High temperature oxidation behavior of MoSi2-Al2O3 composite coating on TZM alloy10.1016/j.ceramint.2021.12.310 ↗
62. Preparation and 1500 ℃ oxidation behavior of crack-free bentonite doped MoSi2 protective coating on molybdenum10.1016/j.corsci.2021.109379 ↗
63. MoSi2/(Mo,Ti)Si2 dual-phase composite coating for oxidation protection of molybdenum alloy10.1016/j.jallcom.2017.08.173 ↗
64. Development of the Al2O3-B2O3-SiO2 glass for thermal barrier coating10.1016/j.jnoncrysol.2023.122785 ↗
65. Effect of oxygen pressure on the microstructure and properties of the Al2O3-SiO2 thin films deposited by E-beam evaporation10.1016/j.surfcoat.2005.07.032 ↗
66. Self-diffusion of oxygen in mullite10.1016/S0955-2219(01)00276-X ↗
67. Self-healing thermal barrier coating systems fabricated by spark plasma sintering10.1016/j.matdes.2018.02.001 ↗
68. Effects of substitution of Al for Si on the lattice variations and thermal expansion of Mo(Si,Al)210.1016/j.intermet.2003.07.002 ↗