Effects of silicone oil additives on hydrogen adsorption and tunnel formation of aluminium foil
Source abstract
Abstract
Abstract This study investigated the adsorption of hydrogen bubbles and tunnel formation on aluminium foil during direct current (DC) electrochemical etching in an electrolyte with and without silicone oil additive. The results indicated that the etched tunnels obtained in the electrolyte containing silicone oil were more uniformly distributed with a more consistent size and length. This was attributed to the additive ability to facilitate the desorption of large bubbles on the aluminium surface, resulting in uniform corroded regions. Moreover, the generated narrow tunnels can accelerate the hydrogen evolution inside the tunnels, resulting in increasing the length of the etched tunnels.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Anodic Oxide Films and Nanostructures · Corrosion Behavior and Inhibition · Electrodeposition and Electroless Coatings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Pit growth behaviour of aluminium under galvanostatic control10.1016/j.corsci.2011.06.024 ↗
2. Effects of polymer corrosion inhibitor on widening etch tunnels of aluminum foil for capacitor10.1016/j.corsci.2013.07.011 ↗
3. Effects of electrodeposited Zn nuclei on tunnel etching behavior of aluminum foil10.1016/j.corsci.2014.11.023 ↗
4. Optimization of etching conditions for site-controlled tunnel pits with high aspect ratios in Al Foil10.1149/1.3308594 ↗
5. Growth of etch tunnels in aluminum at temperatures of 28-60 ℃10.1149/1.2404785 ↗
6. Crystallographic pit growth on aluminum (100)10.1149/1.1839471 ↗
7. A mathematical model for the growth of aluminum etch tunnels10.1149/1.1369368 ↗
8. Tunnel morphology in anodic etching of aluminum10.1149/1.1837730 ↗
9. Growth rates of aluminum etch tunnels10.1149/1.2095356 ↗
10. Aluminum pitting in chloride solutions: morphology and pit growth kinetics10.1016/0010-938X(90)90112-I ↗
11. Effects of pretreatment on the aluminium etch pit formation10.1016/j.corsci.2009.02.028 ↗
12. Effects of prior cathodic polarization on crystallographic pit initiation on aluminum10.1016/j.corsci.2013.06.034 ↗
13. Effect of hydration pretreatment on tunnel etching behaviour of aluminium foil10.1016/j.corsci.2013.01.027 ↗
14. Formation of uniform square-shaped tunnel pit by electrochemical etching with an opened polyimide layer on aluminum foil10.1002/sia.4961 ↗
15. Control of pit initiation sites on aluminum foil using colloidal crystals as mask10.1016/j.electacta.2007.01.021 ↗
16. Inkjet printing for site-controlled tunnel pitting with high aspect ratio in Al10.1149/1.3294519 ↗
17. Localized Corrosion of Aluminum Blister Formation as a precursor of pitting10.1149/1.2133173 ↗
18. The function of the repassivation process in the inhibition of pitting corrosion aluminiu10.1016/0010-938X(80)90098-0 ↗
19. Hydrodynamic measurement of a single corrosion pit10.1016/j.corsci.2004.05.006 ↗
20. The mechanism of hydrogen evolution during anodic polarization of aluminium10.1016/j.electacta.2015.08.076 ↗
21. A study on magnesium corrosion by real-time imaging and electrochemical methods: relationship between local processes and hydrogen evolution10.1016/j.electacta.2016.03.043 ↗
22. The kinetics of hydrogen evolution and oxygen reduction on Alloy 2210.1016/j.corsci.2004.05.005 ↗
23. Influence of hydrogen on the propagation of intergranular corrosion defects in 2024 aluminium alloy10.1016/j.corsci.2018.12.019 ↗
24. Pitting in aluminum thin films10.1149/1.1838722 ↗
25. Electrochemical etching model in aluminum foil for capacitor10.1016/j.corsci.2008.02.017 ↗
26. Effect of placement of aluminium foil on growth of etch tunnels during DC etching10.1016/j.corsci.2013.10.017 ↗
27. Impedance studies of the passive film on aluminium10.1016/j.corsci.2005.05.058 ↗
28. Ultrasonic effect on etching tunnel morphology and distribution of aluminum foil10.1016/j.apsusc.2016.09.074 ↗
29. Evaluation of corrosion behavior of coated metals with AC impedance measurements10.5006/1.3577363 ↗
30. Improved corrosion performance of electrophoretic coatings by silane addition10.1016/j.corsci.2011.11.018 ↗
31. Study on the characteristics of hydrogen bubble formation and its transport during electrolysis of water10.1016/j.ces.2015.07.041 ↗
32. The effect of surfactant on foam and froth properties10.1205/026387699526430 ↗
33. Effect of alcohol, organic acid and potassium chloride concentration on bubble size, bubble rise velocity and gas hold-up in bubble columns10.1016/0300-9467(92)80005-U ↗
34. Study of bubble formation under constant flow conditions10.1205/02638760152424299 ↗
35. Experimental investigation on the bubble formation from needles with and without liquid co-flow10.1016/j.ces.2019.03.026 ↗