Hydrothermal ageing of tetragonal zirconia porous membranes: Effect of thermal residual stresses on the phase stability
Source abstract
Abstract
Yttria-stabilized tetragonal zirconia hollow fiber membranes were aged in aqueous solution for investigating effect of porosity and residual stress on hydrothermal ageing. The monoclinic phase was evaluated by XRD and confocal micro-Raman spectra, to be ≤ 5.0 vol% and ≤ 60 vol% even after 100 h ageing, respectively. It is the first time to clarify the hydrothermal ageing mechanism of highly porous zirconia membranes. Highest monoclinic phase amount occurred at the interface transition regions of the aged samples, which suggested that the thermal residual stress can noticeably promote the monoclinic phase growth rate of the grain boundaries.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Electronic and Structural Properties of Oxides · Advanced Photocatalysis Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Preparation and characterization of inorganic hollow fiber membranes10.1016/S0376-7388(01)00369-6 ↗
2. Yttria stabilized zirconia hollow Fiber membranes10.1111/j.1551-2916.2005.00901.x ↗
3. Hollow fiber membrane of yttrium-stabilized zirconia and strontium-doped lanthanum manganite dual-phase composite for oxygen separation10.1016/j.memsci.2009.05.052 ↗
4. Residual stresses in alumina/zirconia composites: effect of cooling rate and grain size10.1111/j.1151-2916.2001.tb01121.x ↗
5. The occurrence of metastable tetragonal zirconia as a crystallite size effect10.1021/j100888a024 ↗
6. The tetragonal-monoclinic transformation in zirconia: lessons learned and future trends10.1111/j.1551-2916.2009.03278.x ↗
7. Effect of cation dopant radius on the hydrothermal stability of tetragonal zirconia: grain boundary segregation and oxygen vacancy annihilation10.1016/j.actamat.2015.12.051 ↗
8. Low temperature degradation-ageing-of zirconia: a critical review of the relevant aspects in dentistry10.1016/j.dental.2010.04.006 ↗
9. Deceleration of hydrothermal degradation of 3Y-TZP by alumina and lanthana co-doping10.1016/j.actbio.2012.11.027 ↗
10. Martensitic transformation in zirconia part II. Martensite growth
11. Low-temperature transformation kinetics of electron-beam deposited 5 wt.% yttria-stabilized zirconia10.1016/j.actamat.2006.11.007 ↗
12. Subsurface layer evaluation of hydrothermal degradation of zirconia10.1016/j.actamat.2010.09.047 ↗
13. Low temperature degradation of yttria-stabilized tetragonal zirconia polycrystals under aqueous solutions10.1016/0022-3115(94)90271-2 ↗
14. Room temperature ageing of laminate composites of alumina/3 mol%-yttria-stabilized tetragonal zirconia polycrystals10.1111/j.1551-2916.2004.00247.x ↗
15. Effect of dopants and sintering temperature on microstructure and low temperature degradation of dental Y-TZP-zirconia10.1016/j.jeurceramsoc.2012.07.032 ↗
16. Influence of surface finish and residual stresses on the ageing sensitivity of biomedical grade zirconia10.1016/j.biomaterials.2005.11.021 ↗
17. Degradation of yttria stabilized zirconia at 370 K under a low applied stress10.1016/S0921-5093(00)01276-4 ↗
18. Monoclinic phase transformation of zirconia-based dental prostheses, induced by clinically practiced surface manipulations10.1016/j.actbio.2011.04.007 ↗
19. Growth of carbon nanofibers/tubes by an in-situ polymerization route without metal-catalyst10.1016/j.carbon.2016.01.041 ↗
20. Characterization of membrane fouling in submerged ceramic membrane photobioreactors fed with effluent from membrane bioreactors10.1016/j.cej.2016.01.005 ↗
21. Robust organosilica membranes for high temperature reverse osmosis (RO) application: membrane preparation, separation characteristics of solutes and membrane regeneration10.1016/j.memsci.2015.06.060 ↗
22. Phase analysis in zirconia systems10.1111/j.1151-2916.1972.tb11290.x ↗
23. Calibration curve for quantitative analysis of the monoclinic-tetragonal ZrO2 system by X-ray diffraction10.1111/j.1151-2916.1984.tb19614.x ↗
24. A new method to measure monoclinic depth profile in zirconia-based ceramics from X-Ray diffraction data10.3139/146.110251 ↗
25. Direct evidence for continuous linear kinetics in the low-temperature degradation of Y-TZP10.1016/j.actbio.2012.08.032 ↗
26. Quantitative analysis of monoclinic phase in 3Y-TZP by Raman spectroscopy10.1111/j.1551-2916.2010.03635.x ↗
27. 3Y-TZP in-depth phase transformation by Raman spectroscopy: a comparison of three methods10.1111/jace.12892 ↗
28. Raman spectroscopic analysis of phase-transformation and stress patterns in zirconia hip joints10.1117/1.1647547 ↗
29. Phase in Cera-Zirconia binary oxide(1-x)CeO2-xZrO2 nanoparticles: the effect of particle size10.1111/j.1551-2916.2005.00788.x ↗
30. Effect of phase transformations on the fracture toughness of t´yttria stabilized zirconia10.1016/j.msea.2012.07.095 ↗
31. Influence of sintering conditions on low-temperature degradation of dental zirconia10.1016/j.dental.2014.03.005 ↗
32. Cubic-formation and grain-growth mechanisms in tetragonal zirconia polycrystal10.1111/j.1151-2916.2003.tb03483.x ↗
33. Grain boundary segregation-induced phase transformation in yttria-stabilized tetragonal zirconia polycrystal10.2109/jcersj.114.230 ↗
34. Effect of high-temperature aging on the thermal conductivity of nanocrystalline tetragonal ytttria-stabilized zirconia10.1016/j.actamat.2012.06.054 ↗
35. The role of beam dispersion in Raman and photo-stimulated luminescence piezo-spectroscopy of yttria-stabilized zirconia in multi-layered coatings10.1016/j.actamat.2012.08.052 ↗
36. Stress distributions in plasma-sprayed thermal barrier coatings under thermal cycling in a temperature gradient10.1115/1.4002209 ↗
37. Residual stresses and elastic modulus of thermal barrier coatings graded in porosity10.1016/j.surfcoat.2004.08.014 ↗
38. Porosity-dependence of elastic moduli and hardness of 3Y-TZP10.1016/S0272-8842(98)00037-6 ↗
39. Elastic properties of model porous ceramics10.1111/j.1151-2916.2000.tb01680.x ↗
40. Modeling constrained sintering of bi-layered tubular structures10.1016/j.jeurceramsoc.2014.10.010 ↗
41. Measurement of the crystallographically transformed zone produced by fracture in ceramics containing tetragonal zirconia10.1111/j.1151-2916.1982.tb10445.x ↗
42. Sintering through surface motion by the difference in mean curvature10.1016/S1359-6454(03)00222-2 ↗
43. Surface diffusion-controlled neck growth kinetics in early stage sintering of zirconia, with and without applied DC electrical field10.1111/j.1551-2916.2010.04088.x ↗
44. On a ferroelastic mechanism governing the toughness of metastable tetragonal-prime (t’) yttria-stabilized zirconia10.1098/rspa.2007.1829 ↗
45. Stress-induced martensitic transformation and ferroelastic deformation adjacent microhardness indents in tetragonal zirconia single crystals10.1016/S1359-6454(97)00444-8 ↗
46. Significance of internal stresses for the martensitic transformation in yttria-stabilized tetragonal zirconia polycrystals during degradation10.1111/j.1151-2916.1986.tb04789.x ↗
47. Environmental degradation of zirconia ceramics10.1016/0955-2219(95)00035-S ↗