The hot forging behaviour and its effects on the oxidation behaviour of W–Cr alloy
Source abstract
Abstract
Abstract For the first time, hot compression of a sintered W–20Cr–20Mo–1.5Pd alloy was performed to improve oxidation resistance. Residual pores in as-sintered alloy were hypothesized to be eliminated through sliding of the viscous Pd–Cr-containing grain boundary during compression at 10 −4 s −1 and 1350 °C, which increased the alloy’s oxidation resistance. Because of sufficient Cr from the Pd–Cr phase near the grain boundary after hot compression, Cr could transfer more efficiently into the Cr-depleted zone, and therefore, the oxide film/matrix interface was much stronger and showed fewer interfacial cracks than the as-sintered alloy did.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Fusion materials and technologies · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. J.F. Stringer, AGARD Conf Proc. No. 120: High-Temperature Corrosion of Aerospace Alloys, NATO, London, 1973, pp. 284.
2. High temperature oxidation behavior of W–Cr–Nb alloys in the temperature range of 800–1200°C10.1016/j.ijrmhm.2012.12.008 ↗
3. Electrochemical and XPS studies on the passivation behavior of sputter-deposited W–Cr alloys in 12M HCl solution10.1016/S0010-938X(97)00106-6 ↗
4. Microstructure and cyclic oxidation behavior of W–Cr alloys prepared by sintering of mechanically alloyed nanocrystalline powders10.1016/j.ijrmhm.2012.08.015 ↗
5. Isothermal oxidation behaviour of Nb–W–Cr alloys10.1016/j.corsci.2010.05.009 ↗
6. Oxidation behaviour of silicon free tungsten alloys for use as the first wall material
7. Oxidation of Mo–W–Cr–Si alloys10.1007/BF00846689 ↗
8. Manufacturing of self-passivating W–Cr–Si alloys by mechanical alloying and HIP10.1016/j.fusengdes.2011.03.107 ↗
9. Production of high-dense W–Cr sintered alloys and their oxidation behaviors10.2497/jjspm.23.20 ↗
10. Effect of palladium on diffusion processes in the system tungsten–chromium10.1007/BF00793571 ↗
11. A new approach to interpreting the parabolic and non-parabolic oxidation behaviour of hot-pressed β-SiAlON ceramics10.1016/j.corsci.2012.02.004 ↗
12. Oxidation of φ′-aluminium oxynitride10.1016/j.corsci.2010.11.023 ↗
13. Effect of air contamination on ball milling and cold rolling of magnesium hydride10.1016/j.jallcom.2011.02.147 ↗
14. The effect of alumina contamination from the ball-milling of fused silica on the high temperature properties of injection moulded silica ceramic components10.1016/j.jeurceramsoc.2010.12.016 ↗
15. Effect of palladium-addition on the oxidation characteristics of W–Cr sintered alloys10.2497/jjspm.23.25 ↗
16. R.M. German, Powder Metallurgy Science, Metal Powder Industries Federation (MPIF), Princeton, NJ, 1984.
17. Oxidation of Mo–W–Cr–Pd alloys10.1016/0022-5088(90)90085-X ↗
18. Influence of carbon and nitrogen addition on microstructure and hot deformation behavior of biomedical Co–Cr–Mo alloy10.1016/j.matchemphys.2012.05.069 ↗
19. Construction of processing map for biomedical Co–29Cr–6Mo–0.23C–0.14N alloy by using compression tests10.2320/matertrans.M2010388 ↗
20. Modelling of hot deformation for microstructure control10.1179/imr.1998.43.6.243 ↗
21. Ishida · 1938
22. The Cr–Pd (chromium–palladium) system10.1007/BF02841578 ↗
23. Stress-induced phase transformation during superplastic deformation in two-phase Ti–Al–Fe alloy10.1016/S1359-6454(00)00049-5 ↗
24. Interfacial reactions between molten al and a Co–Cr–Mo alloy with and without oxidation treatment10.1016/j.corsci.2011.08.015 ↗
25. Characterisation of oxide films formed on Co–29Cr–6Mo alloy used in die-casting moulds for aluminium10.1016/j.corsci.2013.03.026 ↗
26. Enhancement of corrosion resistance of Fe–Cr–Mo alloy to molten Al by thermal oxidation in air10.1016/j.corsci.2013.07.031 ↗
27. Evolution of carbides and chromium depletion profiles during oxidation of alloy 602 CA10.1016/j.corsci.2013.05.013 ↗
28. Cyclic oxidation of high temperature coatings on new γ′-strengthened cobalt-based alloys10.1016/j.corsci.2013.06.013 ↗
29. Microstructure and oxidation resistance of Si–Mo–B coating for C/SiC coated carbon/carbon composites10.1016/j.corsci.2013.03.015 ↗
30. The vapor pressure of boron oxide over the range 1946–2419K10.1021/j100879a007 ↗