journal article·2014-05

Effects of Co, Al and Mo on the long term passivation of 9Cr–3W (wt.%) ferritic steels in air and wet air at 650°C

S. Tang, S. Zhu, X. Tang, H. Pan, Z.D. Xiang

Corrosion Science· Volume 82
Publisher page

Abstract

Abstract 9Cr–3W (wt.%) ferritic steels with different amounts of Co, Al and Mo added were oxidised in air and wet air at 650 °C for up to 9638 h. Steels with only 1.90 wt.% Al added was not passivated in air and wet air. They were passivated in air but not in wet air when 3 wt.% Cr was added either alone or with 1.83 wt.% Al. Long term passivation was achieved in both air and wet air when 2.22 wt.% Al, 3 wt.% Co and 2.2 wt.% Mo were added; without Mo, passivation in wet air was maintained only temporarily.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Creep-strengthening of steel at high temperatures using nano-sized carbonitride dispersions10.1038/nature01740 ↗
2. Precipitate design for creep strengthening of 9% Cr tempered martensitic steel for ultra-supercritical power plants10.1088/1468-6996/9/1/013002 ↗
3. Enhanced oxidation of the 9%Cr steel P91 in water vapour containing environments10.1016/j.corsci.2006.02.002 ↗
4. Corrosion behavior of 9–12% Cr ferritic–martensitic steels in supercritical water10.1016/j.corsci.2009.12.032 ↗
5. Effects of water vapour on isothermal oxidation of chromia-forming alloys in Ar/O2 and Ar/H2 atmospheres10.1016/j.corsci.2009.08.032 ↗
6. Temperature and water vapour effects on the cyclic oxidation behaviour of Fe–Cr alloys10.1016/j.corsci.2010.04.026 ↗
7. Influence of the dissolved oxygen content on corrosion of the ferritic–martensitic steel P92 in supercritical water10.1016/j.corsci.2011.11.013 ↗
8. Continuous and cyclic oxidation of T91 ferritic steel under steam10.1016/S0010-938X(03)00173-2 ↗
9. Effect of chromium content on the oxidation behaviour of ferritic Steels for applications in steam atmospheres at high temperatures10.1007/s11085-008-9134-x ↗
10. Oxidation of X20 in water vapour: the effect of temperature and oxygen partial pressure10.1007/s11085-009-9138-1 ↗
11. Design of martensitic/ferritic heat-resistant steels for application at 650°C with supporting thermodynamic modeling10.1016/j.msea.2007.05.047 ↗
12. Development of new 11%Cr heat resistant ferritic steels with enhanced creep resistance for steam power plants with operating steam temperatures up to 650°C10.1016/j.msea.2008.04.116 ↗
13. Design and characterization of microstructure evolution during creep of 12% Cr heat resistant steels10.1016/j.msea.2010.02.056 ↗
14. Behaviour of Z phase in 9–12%Cr steels10.1179/174892306X99732 ↗
15. Kinetics of Z-phase precipitation in 9–12 pct Cr steels10.1007/s11661-012-1583-9 ↗
16. Conversion of MX nitrides to Z-phase in a martensitic 12% Cr steel10.1016/j.actamat.2009.09.045 ↗
17. Effect of alloy composition and exposure conditions on the selective oxidation behavior of ferritic Fe–Cr and Fe–Cr–X alloys10.1007/s11085-010-9215-5 ↗
18. Parameters determining the breakaway oxidation behaviour of ferritic martensitic 9%Cr steels in environments containing H2O10.1179/147842204225016921 ↗
19. Steam oxidation resistance of new 12%Cr steels: comparison with some other ferritic steels10.1016/j.corsci.2007.11.033 ↗
20. Influence of aluminium on creep strength of 9–12% Cr steels10.1016/j.msea.2009.07.060 ↗
21. Effects of aluminum content on the mechanical properties of a 9Cr–0.5Mo–1.8W steel10.1007/s11661-997-0284-2 ↗
22. Delta ferritic heat-resistant chromium–molybdenum steels with improved rupture strength10.1007/BF02654704 ↗
23. Performance of Al-rich oxidation resistant coatings for Fe-base alloys10.1002/maco.201005884 ↗
24. Anomalous temperature dependence of oxidation kinetics during steam oxidation of ferritic steels in the temperature range 550–650°C10.1016/j.corsci.2004.01.010 ↗
25. A thermodynamic model of the Z-phase Cr(V, Nb)N10.1016/j.calphad.2007.04.001 ↗
26. The Z-phase in 9–12% Cr ferritic steels: a phase stability analysis10.1016/j.msea.2008.10.028 ↗
27. Criteria for the formation of protective Al2O3 scales on Fe–Al and Fe–Cr–Al alloys10.1016/j.corsci.2005.01.012 ↗
28. High temperature oxidation of Fe–Al and Fe–Cr–Al alloys: the role of Cr as a chemically active element10.1016/j.corsci.2010.06.019 ↗
29. Initial oxidation of Fe–Al and Fe–Cr–Al alloys: Cr as an alumina booster10.1007/s11085-011-9258-2 ↗
30. The effect of water vapor on the initial stages of oxidation of the FeCrAl alloy Kanthal AF at 900°C10.1007/s11085-007-9055-0 ↗
31. TEM investigation of the microstructure of the scale formed on a FeCrAlRE alloy at 900°C: the effect of Y-rich RE particles10.1007/s11085-010-9195-5 ↗
32. Oxidation behaviour of an ODS NiAl-based intermetallic alloy10.1016/S0966-9795(98)00012-0 ↗
33. The oxidation behaviour of NiAl – I. Phase transformations in the alumina scale during oxidation of NiAl and NiAl–Cr alloys10.1016/0010-938X(92)90002-K ↗