Further studies into the flow corrosion cathodic mass transfer kinetics of copper and nickel-aluminium bronze wall-jet electrodes
Source abstract
Abstract
Abstract This work has investigated the corrosion performance and mass transfer of oxygen on copper and nickel-aluminium bronze surfaces within a wall-jet flow cell assembly. Limiting currents of the dissolved oxygen mass-transfer kinetics as a function of volume flow rate at a wall-jet electrode were examined for copper and nickel-aluminium bronze in a 3.5 wt.% NaCl solution. Mass transfer kinetics for the reduction process studied was compared with rotating disc and cylinder electrode data. The wall-jet electrode mass transfer coefficients for commercially pure copper and cast nickel-aluminium bronze were determined to be 0.01-0.06 cm s–1 and 0.01-0.05 cm s–1, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Electrodeposition and Electroless Coatings · Metallurgy and Material Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Mass transfer at a pipe inlet zone in relation to impingement corrosion10.1016/S0735-1933(98)00031-1 ↗
2. The corrosion of nickel-aluminium bronze in seawater10.1016/j.corsci.2005.05.053 ↗
3. The rotating cylinder electrode for studies of corrosion engineering and protection of metals – a critical review10.1016/j.corsci.2017.03.024 ↗
4. The wall-jet10.1017/S002211205600041X ↗
5. Secondary current distribution in a two-dimensional model cell composed of an electrode with an open part10.1007/BF01093363 ↗
6. Wall-jet ring-disc electrode: Part I. Theory10.1016/S0022-0728(83)80397-0 ↗
7. Limiting diffusion currents in hydrodynamic voltammetry III. Wall-jet electrodes10.1016/S0022-0728(73)80245-1 ↗
8. Wall-jet electrode in continuous monitoring voltammetry10.1021/ac00259a050 ↗
9. Albery · 1971
10. The current distribution on a wall-jet electrode10.1016/S0022-0728(85)80002-4 ↗
11. An experimental study of the kinetics of particle deposition in a wall-jet cell using total internal reflection microscopy10.1006/jcis.2000.7139 ↗
12. Non-uniform accessibility and the use of hydrodynamic electrodes for mechanistic studies: a comparison of wall-jet and rotating disc electrodes10.1007/BF01020211 ↗
13. Amperometric batch injection analysis: Theoretical aspects of current transients and comparison with wall‐jet electrodes in continuous flow10.1002/elan.1140070305 ↗
14. Evaluation of a new wall‐jet flow‐through cell for commercial ion‐selective electrodes in flow injection potentiometry10.1002/elan.1140090219 ↗
15. Flow characteristics of a versatile wall‐jet or radial‐flow thin‐layer large‐volume cell for electrochemical detection in flow‐through analytical systems10.1002/elan.1140090109 ↗
16. The Use of a 3D‐Printed Microfluidic Device and Pressure Mobilization for Integrating Capillary Electrophoresis with Electrochemical Detection10.1002/elan.201800367 ↗
17. Erosion-Corrosion
18. Mass transfer from crystalline surfaces in a turbulent impinging jet. Part 2: Erosion and diffusional transfer10.1002/cjce.5450540305 ↗
19. The measurement and prediction of the corrosion potential of copper in chloride solutions as a function of oxygen concentration and mass-transfer coefficient10.1016/0010-938X(95)80013-1 ↗
20. Pletcher · 1991
21. Electrochemical corrosion of unalloyed copper in chloride media -a critical review10.1016/S0010-938X(02)00257-3 ↗
22. Effects of redox system structure on electron-transfer kinetics at ordered graphite and glassy carbon electrodes10.1021/ac00045a011 ↗
23. Turbulence
24. Microjet Electrode: A hydrodynamic ultramicroelectrode with high mass transfer rates10.1021/ac00085a037 ↗
25. The effect of ultrasonic frequency and intensity upon limiting currents at rotating disc and stationary electrodes10.1016/0013-4686(96)00130-2 ↗
26. A-MCF Oliveira Brett, Wall jet electrode linear sweep voltammetry10.1021/j100200a028 ↗
27. On the determination of limiting current density from uncertain data10.1023/A:1004015617522 ↗
28. The electrochemical reduction of oxygen on polycrystalline copper in borax buffer10.1016/0022-0728(94)03343-9 ↗
29. Mass transfer effects of non-cavitating seawater on the corrosion of Cu and 70Cu-30Ni10.1016/0010-938X(90)90198-E ↗
30. Kear · 2001
31. Use of high speed rotating disc electrodes for the study of erosion-corrosion of copper base alloys in seawater10.1016/0010-938X(88)90091-1 ↗
32. Oxygen reduction on copper in neutral NaCl solution10.1016/0022-0728(94)03705-8 ↗
33. Electrochemical behaviour of copper in neutral aerated chloride solution. I. Steady-state investigation10.1007/BF01093751 ↗
34. Bockris · 2000
35. Kinetics and mechanisms of Cu electrodissolution in chloride media10.1149/1.2108335 ↗
36. The anodic dissolution of copper in flowing sodium chloride solutions between 25° and 175°C10.1149/1.2403477 ↗
37. Etude du mecanisme d’oxydo-reduction du cuivre dans les solutions chlorurees acides – I. Systeme Cu- CuCl2-10.1016/0013-4686(81)87029-6 ↗
38. Impedance model for a concentrated solution - Application to the electrodissolution of copper in chloride solutions10.1149/1.2115407 ↗
39. Digital impedance for faradaic analysis - II. Electrodissolution of Cu in HCl10.1149/1.2114164 ↗
40. “Horse Shoe” Corrosion of Copper Alloys in Flowing Sea Water: Mechanism, and Possibility of Cathodic Protection of Condenser Tubes in Power Stations10.5006/0010-9312-34.11.396 ↗
41. Critical evaluation of thermodynamics of complex formation of metal ions in aqueous solutions III. The system Cu(I,II)−Cl−−e at 298.15 K10.1016/S0304-386X(96)00074-6 ↗
42. Experimental study of copper(I) chloride complexing in hydrothermal solutions at 40 to 300°C and saturated water vapor pressure10.1016/S0016-7037(98)00228-2 ↗