Thermal-oxidation behavior of single-phase boride layers produced on pure iron
Source abstract
Abstract
Abstract The influence of the oxidation temperature on the single-phase borided layer was investigated. Oxidation at a temperature range 1073-1273 K resulted in formation of a two-zone oxidized layer: outer zone contained iron oxides and inner zone consisted of iron borates. It was found the intensive dissolution of Fe2B phase started at the temperature of 1173 K and was the reason for appearance of the boron-rich FeBO3 phase. The increase in temperature to 1273 K resulted in the complete dissolution of borided layer. No negative influence of oxidation at 1073 K on nanomechanical properties of iron boride Fe2B was observed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced ceramic materials synthesis · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Growth of the Fe2B layer on SAE 1020 steel employed a boron source of H3BO3 during the powder-pack boriding method10.1016/j.jallcom.2018.02.118 ↗
2. Growth kinetics of the Fe2B layers and adhesion on Armco iron substrate10.1007/s11665-014-1052-2 ↗
3. Wear and surface characterization of boronized pure iron10.1115/1.2401211 ↗
4. Kinetics of electrochemical boriding of low carbon steel10.1016/j.apsusc.2011.03.034 ↗
5. Investigating the morphology and corrosion behavior of electrochemically borided steel10.1016/j.surfcoat.2005.02.210 ↗
6. Simulation of the growth kinetics of boride layers formed on Fe during gas boriding in H2-BCl3 atmosphere10.1016/j.jssc.2012.12.029 ↗
7. A kinetic model for estimating the boron activation energies in the FeB and Fe2B layers during the gas-boriding of Armco iron: effect of boride incubation times10.1016/j.apsusc.2014.01.151 ↗
8. Importance of trimethyl borate temperature used during gas boriding for microstructure, nanomechanical properties and residual stresses distribution on the cross-section of the produced layer10.1016/j.surfcoat.2020.126508 ↗
9. Nanomechanical characterization and fracture toughness of FeB and Fe2B iron borides produced by gas boriding of Armco iron10.1016/j.surfcoat.2017.07.020 ↗
10. Plasma-assisted low temperature boridation of pure iron and steels10.1016/S0257-8972(95)02801-3 ↗
11. Hard iron boride (Fe2B) on 99.97 wt% pure iron10.1016/j.vacuum.2006.01.022 ↗
12. An assessment of the Fe-O system10.1007/BF02645709 ↗
13. A comparison between ion implantation and laser alloying of pure iron for oxidation resistance improvement
14. Oxidation stability of boride coatings
15. Oxidation kinetics of boronized low carbon steel AISI 101810.1007/s11085-008-9123-0 ↗
16. Microstructural alteration and oxidation behavior of boronized stainless steel AISI 440C after heat treatments
17. Effect of boronizing on the cyclic oxidation of stainless steel10.1016/j.surfcoat.2013.04.047 ↗
18. Surface oxidation phenomena of boride coatings grown on iron10.1007/BF02401958 ↗
19. High-temperature behavior of the boride layer of 45# carbon steel10.1016/S0254-0584(01)00270-X ↗
20. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
21. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗