A flow microdevice for studying the initiation and propagation of a single pit
Source abstract
Abstract
A novel experimental setup in which a glass microcapillary can be precisely positioned close to a metallic electrode has been developed to locally inject aggressive solutions at will. It has been used for studying the pitting corrosion of a 316L stainless steel in 0.5 M H2SO4 medium. The amount of chloride ions released by the capillary could be controlled and the analysis of the corrosion products by scanning electron microscopy and energy dispersive X-ray spectroscopy showed there was no selective dissolution of the 316L stainless steel. This device was shown to be an efficient tool for understanding localized corrosion. (c) 2012 Elsevier Ltd. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals · Anodic Oxide Films and Nanostructures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. The nucleation and growth of corrosion pits on stainless steel10.1016/0010-938X(93)90133-2 ↗
2. The nucleation and early stages of growth of corrosion pits
3. Metastable pitting of stainless steel10.5006/1.3583880 ↗
4. Growth of corrosion pits on stainless steel in chloride solution containing dilute sulfate10.1016/0010-938X(92)90191-5 ↗
5. In situ X-ray microprobe study of salt layers during anodic dissolution of stainless steel in chloride solution10.1149/1.2044138 ↗
6. Occurrence of salt films during initiation and growth of corrosion pits10.1149/1.2128772 ↗
7. Diffusional effects in simulated localized corrosion10.1149/1.2134039 ↗
8. Behavior of resistive layers in the localized corrosion of stainless steel10.1149/1.2403283 ↗
9. Pit growth studies in stainless steel foils. I. Introduction and pit growth kinetics10.1016/S0010-938X(01)00133-0 ↗
10. Surface preparation and pit propagation in stainless steels10.1149/1.2404061 ↗
11. Metastable pitting corrosion of stainless steel and the transition to stability10.1098/rsta.1992.0114 ↗
12. Detailed investigation of current transients from metastable pitting events on stainless steel – the transition to stability10.4028/www.scientific.net/MSF.111-112.429 ↗
13. SVET, AFM and AES study of pitting corrosion initiated on MnS inclusions by microinjection10.1016/S0010-938X(02)00222-6 ↗
14. Initiation of a local breakdown of passive film on iron due to chloride ions generated by a liquid-phase ion gun10.1149/1.1407832 ↗
15. Single pit on iron generated by SECM10.1016/j.electacta.2008.01.013 ↗
16. Breakdown of the iron passive layer by use of the scanning electrochemical microscope10.1149/1.1837879 ↗
17. Single pit initiation on 316L austenitic stainless steel using scanning electrochemical microscopy10.1016/j.electacta.2011.07.044 ↗
18. Development of a coupled SECM-EQCM Technique for the study of pitting corrosion on iron10.1149/1.2161574 ↗
19. Impedance feedback control for scanning electrochemical microscopy10.1021/ac010581q ↗
20. Scanning electrochemical microscopy imaging by means of high-frequency impedance measurements in feedback mode10.1021/jp0496809 ↗
21. Electrolyte-resistance change due to an insulating sphere in contact with a disk electrode10.1016/j.electacta.2009.10.043 ↗
22. A combined surface analytical and electrochemical study of the formation of passive layers on Fe/Cr alloys in 0.5M H2SO410.1016/0010-938X(94)00104-E ↗
23. Accumulation of chloride ions in pits growing during anodic polarization10.1016/0010-938X(75)90015-3 ↗
24. Electrochemical aspects of pitting corrosion10.1016/S0010-938X(67)80073-8 ↗
25. Surface analysis of corrosion pits initiated at manganese sulfide inclusions in 304 stainless steel10.1149/1.2069458 ↗
26. Perforated covers for propagating pits10.1149/1.1838423 ↗
27. The mechanism of lacy cover formation in pitting10.1016/S0010-938X(97)00043-7 ↗
28. In situ synchrotron X-ray micro-tomography study of pitting corrosion in stainless steel10.1016/j.corsci.2011.05.040 ↗
29. Characterisation of salt films on dissolving metal surfaces in artificial corrosion pits via in situ synchrotron X-ray diffraction10.1016/j.elecom.2008.03.018 ↗