Low inter-diffusivity γ'-base bondcoats for single crystal superalloy René N5. Ⅱ: Cyclic oxidation behavior at 1100 ºC
Source abstract
Abstract
Abstract Three γ'-base coatings of Hf-doped and Re-modified NiCoCrAlTaY system were deposited on Rene N5 superalloy by magnetron sputtering. The cyclic oxidation behavior of these coatings was investigated at 1100 °C for 500 h. The γ'-base coatings exhibited excellent resistance against coating/substrate interdiffusion and coating rumpling. The TGO was mainly alumina. Minor TGO spallation occurred on coatings with ˜19 at.% and 20 at.% Al, which may be correlated with the formation of Ta-rich oxide particles within TGO scales, while severe TGO spallation occurred on coating with ˜25 at.% Al, which may be correlated with the formation of voids at TGO/coating interface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · High Temperature Alloys and Creep · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Thermal barrier coatings for gas-turbine engine applications10.1126/science.1068609 ↗
2. Progress update on failure mechanisms of advanced thermal barrier coatings: a review10.1016/j.porgcoat.2015.09.019 ↗
3. Multifunctional coating interlayers for thermal-barrier systems10.1557/mrs.2012.238 ↗
4. Microstructure and high temperature oxidation behavior of Pt-modified aluminide bond coats on Ni-base superalloys10.1016/j.pmatsci.2012.08.002 ↗
5. Cyclic oxidation and rumpling behaviour of single phase β-(Ni, Pt)Al coatings with different thickness of initial Pt plating10.1016/j.corsci.2016.05.011 ↗
6. Characterization of a cyclic displacement instability for a thermally grown oxide in a thermal barrier system10.1016/S1359-6454(01)00071-4 ↗
7. Degradation of the platinum aluminide coating on CMSX-4 at 1100 ºC10.1016/S0257-8972(96)03117-9 ↗
8. Effect of aluminizing coating on creep properties of Ni-base single crystal superalloys10.2320/jinstmet.71.320 ↗
9. Mechanical degradation of coating systems in high-temperature cyclic oxidation10.1016/0257-8972(95)02551-0 ↗
10. Effect of temperature on rumpling and thermally grown oxide stress in an EB-PVD thermal barrier coating10.1016/j.surfcoat.2006.07.212 ↗
11. The effect of the thermal barrier coating on the displacement instability in thermal barrier systems10.1016/S1359-6454(01)00422-0 ↗
12. Comparison of the cyclic oxidation behavior of β-NiAl, β-NiPtAl and γ-γ’ NiPtAl coatings on various superalloys10.1016/j.surfcoat.2007.06.039 ↗
13. Bond coatings with high rumpling resistance: design and characterization10.1016/j.surfcoat.2016.05.002 ↗
14. Preparation and enhanced oxidation performance of a Hf-doped single-phase Pt-modified aluminide coating10.1016/j.corsci.2016.09.014 ↗
15. Relationships between microstructural instabilities and mechanical behaviour in new generation nickel-based single crystal superalloys10.7449/2004/Superalloys_2004_667_675 ↗
16. Chemical vapor deposition of smooth α-Al2O3 films on nickel base superalloys as diffusion barriers10.1016/S0257-8972(99)00333-3 ↗
17. Development of Re-based diffusion barrier coatings on nickel based superalloys10.1002/maco.200503924 ↗
18. A magnetron sputtered microcrystalline β-NiAl coating for SC superalloys. Part II. Effects of a NiCrO diffusion barrier on oxidation behavior at 1100 ºC10.1016/j.apsusc.2017.02.245 ↗
19. The effect of Pt content on γ-γ’ NiPtAl coatings10.1016/j.surfcoat.2008.08.063 ↗
20. A concept for the EQ coating system for nickel-Based superalloys10.1007/s11837-008-0086-z ↗
21. Development of new bond coat ‘EQ coating’ system10.1007/s11661-006-0050-x ↗
22. Comparative study of oxidation and interdiffusion behavior of AIP NiCrAlY and sputtered nanocrystalline coatings on a nickel-based single-crystal superalloy10.1016/j.corsci.2015.05.062 ↗
23. Ta effect on oxidation of a nickel-based single-crystal superalloy and its sputtered nanocrystalline coating at 900-1100 ºC10.1016/j.apsusc.2015.03.157 ↗
24. Diffusion of Ta and its influence on oxidation behavior of nanocrystalline coatings with different Ta, Y and Al contents10.1016/j.corsci.2017.07.017 ↗
25. Low inter-diffusivity γ’-base bondcoats for single crystal superalloy René N5. I: primary study of microstructures and oxidation behaviors at 1100 ºC10.1016/j.corsci.2018.11.021 ↗
26. Long-term oxidation tests on a Re-containing MCrAlY coating10.1016/S0257-8972(97)00473-8 ↗
27. Effect of aluminisation characteristics on the microstructure of single phase β-(Ni, Pt)Al coating and the isothermal oxidation behavior10.1016/j.corsci.2016.01.024 ↗
28. Alumina oxide adherence on Fe-Cr-Al alloys modified with group IIIB, IVB, VB, and VIB elements10.1007/BF00665442 ↗
29. Thermal expansion of tribomet MCrAlY coatings10.1016/j.surfcoat.2006.07.261 ↗
30. Mechanical aspects of high-temperature oxidation10.1016/0010-938X(93)90314-7 ↗
31. Synthesis and cyclic oxidation behavior of a (Ni, Pt)Al coating on a desulfurized Ni-base superalloy10.1007/s11661-999-0308-1 ↗
32. Effect of Dy on oxide scale adhesion of NiAl coatings at 1200 ºC10.1016/j.corsci.2011.03.003 ↗
33. A magnetron sputtered microcrystalline β-NiAl coating for SC superalloys. Part I. Characterization and comparison of isothermal oxidation behavior at 1100 ºC with a NiCrAlY coating10.1016/j.apsusc.2014.10.106 ↗
34. Preparation and oxidation performance of a NiCoCrAlYSiHf + NiAl composite coating deposited by arc ion plating and magnetron sputtering techniques10.1007/s11665-018-3845-1 ↗
35. Oxide growth stress measurements and relaxation mechanisms for alumina scales grown on FeCrAlY10.1002/maco.201206760 ↗
36. Factors governing breakaway oxidation of FeCrAl-based alloys10.1002/(SICI)1521-4176(200004)51:4<224::AID-MACO224>3.0.CO;2-B ↗
37. Creep relaxation and the spallation of oxide layers10.1016/S0257-8972(97)00471-4 ↗
38. The mechanism of scale adhesion on sputtered microcrystallized CoCrAl Film10.1007/BF01046819 ↗
39. Rehealing ability of oxide scales formed on microcrystalline K38G coatings10.1007/BF01047033 ↗
40. Surface rumpling of a (Ni, Pt)Al bond coat induced by cyclic oxidation10.1016/S1359-6454(00)00156-7 ↗
41. On the rumpling mechanism in nickel-aluminide coatings. Part I: an experimental assessment
42. Temperature and cycle-time dependence of rumpling in platinum-modified diffusion aluminide coatings10.1016/j.scriptamat.2007.06.031 ↗
43. Rumpling of CVD (Ni, Pt)Al diffusion coatings under intermediate temperature cycling10.1016/j.surfcoat.2009.04.016 ↗
44. Comparison of thermal expansion and oxidation behavior of various high-temperature coating materials and superalloys10.1179/mht.2004.012 ↗
45. An analytical model of rumpling in thermal barrier coatings10.1016/j.jmps.2004.11.002 ↗
46. Effect of Hf, Y and C in the underlying superalloy on the rumpling of diffusion aluminide coatings10.1016/j.actamat.2007.10.006 ↗
47. Improvement of MCrAlY coatings by addition of rhenium10.1016/0257-8972(94)90131-7 ↗
48. Microstructural analysis of the role of rhenium in advanced MCrAlY coatings10.1016/0257-8972(95)02546-4 ↗
49. Improvement of the oxidation resistance of NiCrAlY coatings by the addition of rhenium10.1016/j.surfcoat.2006.02.009 ↗
50. Development of a diffusion mobility database for Ni-base superalloys10.1016/S1359-6454(01)00383-4 ↗