journal article·2014-03

Sputter-deposited Mg–Al–Zn–Cr alloys – Electrochemical characterization of single films and multilayer protection of AZ31 magnesium alloy

Laurynas Staišiūnas, Povilas Miečinskas, Konstantinas Leinartas, Algis Selskis, Asta Grigucevičienė, Eimutis Juzeliūnas

Corrosion Science· Volume 80
Publisher page

Abstract

Abstract Mg–Al–Zn–Cr alloy films were deposited on glass and AZ31 substrates by dc magnetron sputtering in a wide range of Cr concentrations. Distinctive passive regions and breakdown potentials identified high passivity when Cr concentrations were over 30 at.%. Both single and multilayer structures did not show any protective effect on the AZ31 magnesium alloy. SEM revealed a distinctive corrosion activity along the AZ31–alloy interface leading to delaminating of the alloy film. A high protection performance of AZ31 was achieved when applying annealed multilayer structures. The research proposes a concept of magnesium protection by Mg alloys with resistant metals, which do not form intermetallic compounds with Mg.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Surface reaction of magnesium in hank’s solutions10.4028/www.scientific.net/MSF.350-351.349 ↗
2. Magnesium alloys development towards the 21st century10.4028/www.scientific.net/MSF.350-351.19 ↗
3. Protective coatings on magnesium and its alloys – a critical review10.1016/S0925-8388(01)01899-0 ↗
4. Trends in the development of new Mg alloys10.1146/annurev.matsci.020408.133717 ↗
5. Magnesium and its alloys as orthopedic biomaterials: a review10.1016/j.biomaterials.2005.10.003 ↗
6. The history of biodegradable magnesium implants: a review10.1016/j.actbio.2010.02.028 ↗
7. Effect of cerium additive on aluminium-based chemical conversion coating on AZ91D magnesium alloy10.1016/j.apsusc.2013.05.012 ↗
8. Formation of rare earth-permanganate conversion coating on AZ61 magnesium alloy and its properties
9. Enhanced corrosion resistance of AZ31B magnesium alloy by cooperation of rare earth cerium and stannate conversion coating10.1016/S1452-3981(23)16577-1 ↗
10. In-situ study of the formation process of stannate conversion coatings on AZ91D magnesium alloy using electrochemical noise10.1016/j.corsci.2009.11.009 ↗
11. Synergistic effect of cerium coating and phytic acid conversion coating on AZ31B magnesium alloy10.1016/j.surfcoat.2012.09.008 ↗
12. Effect of post heat treatment on corrosion resistance of phytic acid conversion coated magnesium10.1016/j.jmst.2012.12.014 ↗
13. Corrosion protection of magnesium alloys by cerium, zirconium and niobium-based conversion coatings10.1016/j.corsci.2008.03.015 ↗
14. Effect of permanganate concentration on the formation and properties of phosphate/permanganate conversion coating on AZ31 magnesium alloy10.1016/j.corsci.2013.01.014 ↗
15. Decanoate conversion layer with improved corrosion protection for magnesium alloy10.1016/j.corsci.2013.01.034 ↗
16. Composite film formed on magnesium alloy AZ31 by chemical conversion from molybdate/phosphate/fluorinate aqueous solution toward corrosion protection10.1016/j.surfcoat.2012.11.076 ↗
17. Double-layered manganese phosphate conversion coating on magnesium alloy AZ91D: Insights into coating formation, growth and corrosion resistance10.1016/j.surfcoat.2012.12.005 ↗
18. Effect of microstructure on the zinc phosphate conversion coatings on magnesium alloy AZ9110.1016/j.apsusc.2012.09.119 ↗
19. Effect of [Ca2+] and [PO43-] levels on the formation of calcium phosphate conversion coatings on die-cat magnesium alloy AZ91D10.1016/j.corsci.2011.10.022 ↗
20. An investigation of new barium phosphate chemical conversion coating on AZ31 magnesium alloy10.1016/j.surfcoat.2012.09.009 ↗
21. Study of the in situ growth mechanism of Mg–Al hydrotalcite conversion film on AZ31 magnesium alloy10.1016/j.corsci.2012.05.022 ↗
22. Formation mechanism and properties of titanate conversion coating on AZ31 magnesium alloy10.1149/2.091205jes ↗
23. A simple route towards hydroxyapatite-Mg(OH)(2) conversion coating for magnesium10.1016/j.corsci.2011.03.008 ↗
24. Metal plasma immersion ion implantation and deposition (MPIIID): chromium on magnesium10.1016/S0257-8972(98)00399-5 ↗
25. Wear and corrosion protection of aluminum and magnesium alloys using chromium and chromium nitride PVD coatings10.1002/(SICI)1527-2648(199910)1:2<133::AID-ADEM133>3.0.CO;2-I ↗
26. Corrosion behavior of chromium and oxygen plasma-modified magnesium in sulfate solution and simulated body fluid10.1016/j.apsusc.2012.05.036 ↗
27. Controllable degradation of biomedical magnesium by chromium and oxygen dual ion implantation10.1016/j.matlet.2011.04.043 ↗
28. Electrochemical behaviour of chromium-implanted magnesium in hydroxide, chloride and sulphate solutions10.1016/j.surfcoat.2008.02.018 ↗
29. Improvement of corrosion resistance of magnesium alloy by sputter coating with stainless steel10.1179/0020296712Z.00000000019 ↗
30. Continuous versus interrupted creep in AZ91D magnesium alloy10.1016/S0921-5093(00)01353-8 ↗
31. The effect of micro-alloying addition of Cr on age hardening of an Mg-Zn alloy10.1016/j.msea.2008.04.014 ↗
32. Corrosion behaviour of some vapour deposited magnesium alloys10.1179/026708396790122107 ↗
33. Pourbaix · 1966 · 139
34. Valve Metal, Si and ceramic oxides as dielectric films for passive and active electronic devices
35. 1998
36. Encyclopedia of Materials: Science and Technology, Elsevier Science Ltd (2001). pp. 4739–4743.
37. XRD data basis “Powder Diffraction File-2” (D8 Advance Diffractometer Software, 2006).
38. Corrosion resistance of nanocrystalline Mg–Cr alloys deposited by magnetron sputtering10.1016/j.matchemphys.2010.12.017 ↗
39. Understanding magnesium corrosion10.1002/adem.200310405 ↗