Evaluation of the corrosion of UNS G10200 steel in aerated brines under hydrodynamic conditions
Source abstract
Abstract
The influence of the flow velocity and the temperature on the corrosion of UNS G10200 in aerated brines had been evaluated by means of electrochemical techniques at the RCE. Increasing the flow velocity and the temperature enhances the corrosion kinetic of the system and changes the corrosion mechanism. This behaviour was adduced to the presence of a mixed control on the corrosion process related with the formation and stabilization of corrosion product layers on the electrode surface. The correlations of Wranglen and Silverman for the mass transfer and the wall shear stresses respectively were validated at the RCE for this system.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. G. Schmitt, M. Bakalli, A Critical Review of Measuring Techniques for Corrosion Rates under Flow Conditions, CORROSION NACExpo. Paper No. 06593.
2. K.D. Efird, Flow Accelerated Corrosion Testing Basics, CORROSION NACExpo Paper No. 06689.
3. The Rotating cylinder electrode for examining velocity-sensitive corrosion – A review10.5006/1.3299215 ↗
4. Cottis · 1999
5. Electrochemical impedance spectroscopy on 3-D inhomogeneous surfaces10.1149/1.2095610 ↗
6. Direct measurement of the corrosion current for oxygen-reduction corrosion10.1520/STP28040S ↗
7. Strömungsabhängige korrosion. Gegenwärtiger kenntnisstand bezüglich des mechanismus
8. U. Lotz, Velocity Effects in flow Induced Corrosion, NACE Corrosion 90 Paper No 27, 1990.
9. Chemo-mechanical effects of flow on corrosion10.5006/1.3585229 ↗
10. The cathodic reduction of oxygen of stainless steels in a neutral solution10.1016/0010-938X(90)90156-Y ↗
11. Oxygen reduction on stainless steel10.1007/BF00296691 ↗
12. Oxygen reduction on iron – Part IV. Processes in alkaline solutions10.1016/0013-4686(94)85115-8 ↗
13. S. Kapusta, Oxygen Reduction on Stainless Steels in Aerated Brines, NACE Corrosion 2004 Paper No. 04655.
14. Mass-transport-limited oxygen reduction reaction on AA 2024-T3 and selected intermetallic compounds in chromate containing solutions10.5006/1.3290339 ↗
15. Discussion on: electrochemical potential measurements under simulated BWR water chemistry conditions10.5006/1.3299212 ↗
16. Ionic mass transfer and concentration polarisation at rotating electrodes10.1149/1.2781252 ↗
17. The mechanism of the oxygen reduction on rust-covered metal substrates10.1016/0010-938X(94)90161-9 ↗
18. D. Silverman, An Approach for Predicting Velocity Sensitive Corrosion, NACE Corrosion 90 Paper No. 13, 1990.
19. Perry · 1999
20. Viscosity of aqueous NaCl solutions in the temperature range 25–200°C and in the pressure range 0.1–30MPa10.1007/BF00507835 ↗
21. Wilke · AIChE Journal · 1955 · 1 · 26410.1002/aic.690010222 ↗
22. Wranglen · Physico-Chemical Hydrodynamics · 1997 · 761