Cyclic oxidation behaviour of Ti3Al-based alloy with Ni–Cr protective layer

Abstract The influence of a thin 80Ni–20Cr (at.%) protective coating on the cyclic oxidation of a Ti–24Al–11Nb (at.%) alloy based on Ti 3 Al at 600 and 900 °C in air was investigated using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and X-ray diffraction analysis (XRD). The results of the oxidation tests showed that deposited Ni–Cr layer provides an improved oxidation resistance due to the formation of protective oxide scale which barriers the outward Ti diffusion into the scale. In some extent surface formation of the nitride layer also prevents diffusion of alloying elements from the matrix. Although oxidation at 900 °C is faster than that at 600 °C, a remarkable reduction in mass gain of the alloy with protective coating was observed. The thickness of oxide scale on the coated samples is approximately two times less than that formed on the uncoated samples treated under the same exposure conditions (120 h).