Chemistry and melting characteristics of fireside deposits taken from boiler tubes in waste incinerators
Source abstract
Abstract
Abstract Twenty-three tube deposits taken from seven heat-recovery boilers of municipal solid waste incinerators were examined by chemical analyses and X-ray diffraction. These deposits were measured by Differential Scanning Calorimeter (DSC) in N 2 to investigate their melting characteristics. Sixteen deposits were used to evaluate their corrosiveness to carbon steel by high-temperature corrosion test conducted at 400 °C for 20 h in 1500 ppm HCl – 300 ppm SO 2 – 7.5%O 2 – 7.5%CO 2 – 20%H 2 O – N 2 . Total heat of endothermic reactions of the deposits taking place between 200 and 400 °C can be related to the corrosion rate of carbon steel at 400 °C. Corrosion initiated at temperatures when the deposits started to melt, became severe when fused salt constituents increased, and alleviated when the majority of the deposits became fused. The corrosion can be interpreted as fused salt corrosion caused by chloride and sulfate salts.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · Concrete and Cement Materials Research · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Chlorwasserstoffkorrosionen in Müllverbrennungsanlagen
2. Verbrennung von Hausmüll mit höheren Kunststoffanteilen
3. Korrosionen an Müllverbrennungskesseln
4. Das Verhalten von Staub und Verbrennungsgas in Dampferzeigern
5. Corrosion by chlorine and by hydrogen chloride at high temperatures10.1021/ie50451a008 ↗
6. Versuche zur Klärung der Korrosionsursachen in Müllverbrennungsanlagen
7. Corrosion of superheaters and reheaters of pulverized-coal-fired boilers
8. The mechanism in high temperature corrosion in municipal incinerators10.5006/0010-9312-28.7.274 ↗
9. High temperature corrosion problems in waste incineration systems10.1007/BF02833571 ↗
10. Daniel · 1987
11. Salt melt induced corrosion of metallic materials in waste incineration plants10.1002/(SICI)1521-4176(199907)50:7<373::AID-MACO373>3.0.CO;2-T ↗
12. The role of molten salts in the corrosion of metals in waste incineration plants
13. Thermodynamic and kinetic consideration on the corrosion of Fe, Ni and Cr beneath a molten KCl–ZnCl2 mixture10.1016/j.corsci.2005.02.015 ↗
14. Optimization of in-service performance of boiler steels by modeling high-temperature corrosion10.1002/maco.200503929 ↗
15. N. Otsuka, T. Kudo, Hot corrosion of commercial tube steel materials in a Japanese waste incinerator environment, in: Y. Saito, B. Őnay, T. Maruyama (Eds.), Proc. of the Workshop on High Temperature Corrosion of Advanced Materials and Protective Coatings, Elsevier Science Publishers BV, 1992, pp. 205–211.10.1016/B978-0-444-88970-6.50029-4 ↗
16. Otsuka · 1993
17. Annual project report entitled “Development of High-Efficiency Waste Power Generation Technology, Development of Corrosion-Resistant Superheater Materials”, prepared by the Japan Research and Development Center for Metals (JRCM) for the New Energy and Industrial Technology Development Organization (NEDO), March 2000, Report No. 010020806-5. Available from: (in Japanese).
18. Phase studies on the systems Na2SO4–SO3, K2SO4–SO3, and Na2SO4–K2SO4–SO3
19. G. Sorell, C.M. Schillmoller, Alloys for High-Temperature Service in Municipal Waste Incinerators, ASM First International Conference on Heat-Resistant Materials, Lake Geneva, Wisconsin, September, 1991.
20. Chemistry and electrochemistry of the hot corrosion of metals10.5006/1.3583026 ↗
21. N. Otsuka, An acid–base reaction for fused LiCl −41m/oKCl melt equilibrated with gas atmospheres containing HCl, H2 O, and O2 at 873K, in: S. Deki, K. Ota, Y. Iwadate, M. Matsunaga (Eds.), Proc. of 2008 Joint Symposium on Molten Salts, Kobe, Japan, October 19–23, 2008, pp. 428–432.
22. Solubility study on protective oxide films in molten chlorides created by refuse incineration environment10.1002/(SICI)1521-4176(200003)51:3<177::AID-MACO177>3.0.CO;2-O ↗
23. K. Masamura, Corrosion of stainless steel by NaCl–KCl–Na2SO4–K2SO4 eutectic fused salt, in: Proc. of Symposium on Corrosion and Prevention, JSCE, Tokyo, June 8, 1995, pp. 80–88 (in Japanese).
24. A thermodynamic approach on vapor-condensation of corrosive salts from flue gas on boiler tubes in waste incinerators10.1016/j.corsci.2008.02.004 ↗
25. J. Sakai, I. Matsushima, Corrosion characteristics of boiler tube in municipal incinerators, Boshoku Gijutsu, Corros. Eng. 25 (1976) 137–142 (in English).10.3323/jcorr1974.25.3_137 ↗