Effects of electrical discharge surface modification of superalloy Haynes 230 with aluminum and molybdenum on oxidation behavior
Source abstract
Abstract
The effects of the electrical discharge alloying (EDA) process on improving the high temperature oxidation resistance of the Ni-based superalloy Haynes 230 have been investigated. The 85 at.% Al and 15 at.% Mo composite electrode provided the surface alloying materials. An Al-rich layer is produced on the surface of the EDA specimen alloyed with positive electrode polarity, whereas, many discontinuous piled layers are attached to the surface of the EDA superalloy when negative electrode polarity is selected. The oxidation resistance of the specimen alloyed with positive electrode polarity is better than that of the unalloyed superalloy, and the effective temperature of oxidation resistance of the alloyed layer can be achieved to 1100 °C. Conversely, the oxidation resistance of the other EDA specimen alloyed with negative electrode polarity is even worse than that of the unalloyed superalloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Machining and Optimization Techniques · High-Temperature Coating Behaviors · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Sims · 1987
2. Effects of laser surface modification of Nimonic with aluminum on oxidation behavior10.1023/A:1016028911317 ↗
3. Interdiffusion behavior of Ni–Cr–Al–Y coatings deposited by arc-ion plating10.1023/A:1010302001326 ↗
4. Conditions for pack codeposition of Al and Hf on nickel-base superalloys10.1016/S0257-8972(03)00790-4 ↗
5. The degradation of (Ni,Pd)Al coatings on superalloy IN738 during isothermal oxidation10.1016/j.surfcoat.2003.12.004 ↗
6. Surface modification of aluminum by electrical discharge alloying10.1016/0921-5093(94)91088-X ↗
7. Surface modification of aluminum matrix composites by electrical discharge alloying10.4028/www.scientific.net/MSF.217-222.1661 ↗
8. Surface modification of SKD 61 during EDM with metal powder in the dielectric10.2320/matertrans.42.2597 ↗
9. Formation of TiC/Ti2AlC composite layer and improvement on surface roughness10.2320/matertrans.42.1717 ↗
10. H. Tsukahara, H. Minami, K. Demizu, T. Stone, Surface modification of titanium using EDM process, in: Proceedings of the 12th International Symposium for Electromachining (ISEM XII), Aachen, Germany, May 1998, pp. 493–503.
11. H. Nagano, N. Mohri, Y. Tsunekawa, M. Okumiya, N. Saito, Metal surface modification by electrical discharge machining, in: Proceedings of the 7th International Conference on Surface Modification Technology, Niigata, Japan, 1993, pp. 297–314.
12. H. Miyake, Y. Imai, A. Goto, T. Magara, N. Saito, N. Mohri, Improvement of tool life through surface modification by electrical discharge machining, in: Proceedings of the 12th International Symposium for Electromachining (ISEM XII), Aachen, Germany, May 1998, pp. 261–270.
13. T. Satsuta, K. Hirai, Surface modification using electrode transfer induced by discharge in gas, in: Proceedings of the 13th International Symposium for Electromachining (ISEM XIII), Bilbao, Spain, May 2001, pp. 695–700.
14. Electrical discharge surface alloying of superalloy Haynes 230 with aluminum and molybdenum10.2320/matertrans.45.2878 ↗
15. Powder Diffraction Files, Joint Committee on Powder Diffraction Standards (JCPDS) – International Centre for Diffraction Data (ICDD), 12 Campus Boulevard Newtown Square, PA 19073-3273, USA, Copyright (C) JCPDS-ICDD 1997.
16. Oxide scale formation and isothermal oxidation behavior of Mo–Si–B intermetallics at 600–1000°C10.1016/S0966-9795(98)00058-2 ↗
17. Boron-doped molybdenum silicides for structural applications10.1016/S0921-5093(98)01045-4 ↗
18. Microstructure and oxidation behaviour of chromium–molybdenum silicides10.1016/S0921-5093(97)00678-3 ↗
19. Chromium vaporisation from Fe, Cr base alloys used as interconnect in fuel cells10.1002/srin.200100163 ↗
20. URL: http://www.haynesintl.com/mini/230Site/230.htm, Haynes 230 alloy Product Brochure, Haynes International, Inc. All rights reserved 2004.
21. Birks · 1983
22. Massalski · 1987
23. Kofstad · 1988