Cell response and corrosion behavior of electrodeposited diamond-like carbon films on nanostructured titanium
Source abstract
Abstract
Surface characteristics such as roughness and contact angle of flat and nanostructured titanium samples and diamond-like carbon films (DLC) electrodeposited on the nanostructured samples were evaluated. Also, the mechanical properties and the corrosion resistance of the samples were evaluated in phosphate buffered saline (PBS). Biocompatibility was assessed by analyzing an in vitro cell culture. Nanostructured samples presented better cell biocompatibility. DLC deposited onto nanostructured samples remained with nanostructured morphology, presented high hardness and improved corrosion resistance compared to bare titanium. The DLC films electrodeposited from acetonitrile presented higher corrosion resistance in PBS solution when compared to DLC films deposited from N,N-dimethylformamide.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics · Electrodeposition and Electroless Coatings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Corrosion behaviour of Ti–6Al–7Nb and Ti–6Al–4V ELI alloys in the simulated body fluid solution by Electrochemical Impedance Spectroscopy10.1016/j.electacta.2006.06.018 ↗
2. Relationship between surface properties (roughness, wettability and morphology) of titanium and dental implant removal torque10.1016/j.jmbbm.2007.12.002 ↗
3. Biocompatibility and in situ growth of TiO2 nanotubes on Ti using different electrolyte chemistry10.1111/j.1551-2916.2008.02545.x ↗
4. Bioactive metals: preparation and properties
5. Relationship between surface properties (roughness, wettability) of titanium and titanium alloys and cell behaviour10.1016/S0928-4931(03)00033-X ↗
6. An abutment screw loosening study of a diamond like carbon-coated CP titanium implant10.1111/j.1365-2842.2004.01475.x ↗
7. Tribological, electrochemical and tribo-electrochemical characterization of bare and nitrided Ti6Al4V in simulated body fluid solution10.1016/j.corsci.2011.01.057 ↗
8. Characterization of mixed and gross slip fretting wear regimes in Ti6Al4V interfaces at room temperature10.1016/j.wear.2003.10.023 ↗
9. Tribocorrosion of diamond-like carbon deposited on Ti6Al4V10.1007/s11249-009-9408-8 ↗
10. Comparison of hydrogenated and unhydrogenated carbon films obtained by FCVA onto Ti6Al4V: structure, hardness and biocompatibility study10.1016/j.surfcoat.2005.11.028 ↗
11. A review of modified DLC coatings for biological applications10.1016/S0925-9635(03)00081-5 ↗
12. Hydrogen content variation for enhancing the lubricated tribological performance of DLC coatings with ester10.1016/j.surfcoat.2011.02.065 ↗
13. Effect of plasma energy on enhancing biocompatibility and hemocompatibility of diamond-like carbon film with various titanium concentrations10.1016/j.jallcom.2008.11.043 ↗
14. Variation of the wettability of DLC-coatings by network modification using silicon and oxygen10.1016/S0925-9635(97)00237-9 ↗
15. Electrodeposition of diamond-like carbon (DLC) films on Ti10.1016/j.apsusc.2008.10.087 ↗
16. A. Kumar, D. Kennard, Diamond-like carbon coated dental retaining screws, US Patent n˚ US 6,447,295 B1, September 10, 2002.
17. Bonding in hydrogenated diamond-like carbon by Raman spectroscopy10.1016/j.diamond.2004.10.030 ↗
18. An improved technique for determining hardness and elastic-modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
19. Re-examination and further development of a precise and rapid dye method for measuring cell growth/cell kill10.1016/0022-1759(89)90397-9 ↗
20. Review of the Folin phenol protein quantitation method of Lowry, Rosebrough, Farr and Randall10.1016/0003-2697(79)90222-7 ↗
21. Studies on the biocompatibility of materials: fibroblast reorganization of substratum-bound fibronectin on surfaces varying in wettability10.1002/(SICI)1097-4636(199603)30:3<385::AID-JBM13>3.0.CO;2-J ↗
22. Effect of the acidity ppof aqueous solutions on the wettability of diamond, graphite and pyrocarbon surfaces10.1016/S0925-9635(99)00184-3 ↗
23. Studies of diamond and diamond-like film surfaces using XAES, AFM and wetting10.1016/S0042-207X(02)00460-8 ↗
24. Hydrophobicity in DLC films prepared by electrodeposition technique10.1016/j.apsusc.2008.06.015 ↗
25. Facile synthesis of CNTs-doped diamond-like carbon film by electrodeposition10.1016/j.surfcoat.2008.06.162 ↗
26. Effect of deposition voltage on the microstructure of electrochemically deposited hydrogenated amorphous carbon films10.1016/j.carbon.2004.07.016 ↗
27. The breakdown mechanism of diamond-like carbon coated nickel in chloride solution10.1016/S0010-938X(97)00064-4 ↗
28. Corrosion behavior and biocompatibility of titanium screws produced by powder injection moulding (PIM) for temporary applications
29. Electrochemical Impedance Spectroscopy study of the passive oxide film on titanium for implant application10.1016/0013-4686(95)00465-3 ↗
30. Biotribocorrosion of CoCrMo orthopaedic implant materials – assessing the formation and effect of the biofilm10.1016/j.triboint.2007.02.019 ↗
31. Fretting corrosion behaviour of thermally oxidized CP-Ti in Ringer’s solution10.1016/j.corsci.2009.10.029 ↗
32. In-body corrosion fatigue failure of a stainless steel orthopaedic implant with a rare collection of different damage mechanisms10.1016/j.engfailanal.2006.11.037 ↗
33. Looking at the micro-topography of polished and blasted Ti-based biomaterials using atomic force microscopy and contact angle goniometry10.1016/j.colsurfb.2006.05.002 ↗