Effect of strain amplitudes and ductility dip cracking on corrosion fatigue behavior of stainless steel weld metal in high-temperature pressurized water
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Fatigue and fracture mechanics · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. Identification method of internal leakage in nuclear power plants valves using convolutional block attention module10.1016/j.nucengdes.2024.113239 ↗
2. Internal leakage rate prediction and failure diagnosis of buried pipeline ball valve based on valve cavity pressure detection10.1016/j.flowmeasinst.2022.102303 ↗
3. Reliability assessment and data processing techniques of the squib valve in pressurized water NPPs10.1016/j.nucengdes.2018.03.019 ↗
4. Analytical studies of long-term IRWST injection core cooling under small break LOCA in passive safety PWR10.1016/j.anucene.2015.11.006 ↗
5. O.K. Chopra, G.L. Stevens, Effect of LWR Coolant Environments on the Fatigue Life of Reactor Materials, vol. 1, 2018. NUREG/CR-6909 Rev.
6. Corrosion of nickel-base alloys in primary medium of pressurized water reactors: New insights on the oxide growth mechanisms and kinetic modelling10.1016/j.corsci.2015.09.001 ↗
7. Historical experience providing bases for predicting corrosion and stress corrosion in emerging supercritical water nuclear technology: Part 1—review10.5006/0726 ↗
8. Fatigue model of domestic 316LN steel in simulated primary coolant environment of CAP140010.1016/j.ijfatigue.2019.105297 ↗
9. Role of welding residual strain and ductility dip cracking on corrosion fatigue behavior of Alloy 52/52M dissimilar metal weld in borated and lithiated high-temperature water10.1016/j.jmst.2019.10.012 ↗
10. Microstructure and stress corrosion cracking of a SA508–309 L/308L-316L dissimilar metal weld joint in primary pressurized water reactor environment10.1016/j.jmst.2019.08.035 ↗
11. Environmentally assisted fatigue behavior of 308L weld metal in borated and lithiated high-temperature water10.1016/j.jnucmat.2020.152365 ↗
12. Differences of corrosion fatigue behaviors among 316LN base metal, 316LN heat-affected zone and 308L weld metal in a safe-end weld joint in borated and lithiated high-temperature water10.1016/j.ijfatigue.2021.106223 ↗
13. Environmentally assisted crack growth in 308L stainless steel weld metal in simulated primary water10.1016/j.corsci.2016.12.011 ↗
14. Environmentally assisted cracking of forged 316LN stainless steel and its weld in high temperature water10.1016/j.corsci.2018.10.032 ↗
15. Effect of δ-ferrite on the stress corrosion cracking behavior of 321 stainless steel10.1016/j.corsci.2019.07.005 ↗
16. Role of δ-ferrite in stress corrosion cracking retardation near fusion boundary of 316NG welds10.1016/j.jnucmat.2012.02.006 ↗
17. Effect of thermal aging on the environmental assisted cracking behavior of 308L weld metal in high temperature water10.1016/j.corsci.2022.110902 ↗
18. Effect of δ–ferrite and strain-induced martensite on hydrogen embrittlement of STS 308 L and STS 316 L all-weld metals10.1016/j.corsci.2024.111977 ↗
19. The effect of δ-ferrite on fatigue cracks in 304L steels10.1016/S0142-1123(00)00043-8 ↗
20. Effects of strain rate on low-cycle fatigue crack growth behavior of 316LN weld metal in high-temperature pressurized water10.1016/j.corsci.2022.110169 ↗
21. 12 - Stress corrosion cracking (SCC) of austenitic stainless and ferritic steel weldments
22. Effect of inhomogeneous microstructure on the stress corrosion cracking behavior of 316LN stainless steel weld joint under high-temperature and high-pressure water small punch test10.1016/j.corsci.2024.111895 ↗
23. Environment assisted cracking of 308L weld metal in high temperature water10.1016/j.jnucmat.2021.153275 ↗
24. Influence of pre-exposure on low-temperature embrittlement of alloy 82 welds in simulated PWR primary water environment10.1016/j.corsci.2025.112822 ↗
25. Assessing the influence of welding-induced mechanics on oxidation and stress corrosion cracking in an Alloy 600-Alloy 152 M weldment under simulated PWR primary water10.1016/j.jnucmat.2024.155349 ↗
26. Effect of thermal ageing and dissolved gas on corrosion of 308L stainless steel weld metal in simulated PWR primary water10.1016/j.jmst.2021.05.026 ↗
27. Stress corrosion cracking of 316L HAZ for 316L stainless steel/Inconel 52M dissimilar metal weld joint in simulated primary water10.1016/j.corsci.2016.07.031 ↗
28. A novelty in the precipitation of the σ-phase in superaustenitic stainless steel weld metals10.1016/j.matlet.2024.137583 ↗
29. Effects of welding columnar grain orientation and strain rate on corrosion fatigue behavior of Alloy 52/52M weld metal in high-temperature water10.1016/j.corsci.2020.109196 ↗
30. Synergistic effect of mechanical and environmental damages of 316LN stainless steel under different fatigue strain amplitudes in high-temperature pressurized water10.1016/j.msea.2018.11.081 ↗
31. Effects of temperature on corrosion fatigue behavior of 316LN stainless steel in high-temperature pressurized water10.1016/j.corsci.2018.10.023 ↗
32. Insights into dissolved oxygen dependent crack initiation mechanism of 316LN stainless steel fatigue tested in high-temperature pressurized water10.1016/j.corsci.2024.112662 ↗
33. Effect of Cr/Ni equivalent ratio on ductility-dip cracking in AISI 316L weld metals10.1016/j.matdes.2010.06.016 ↗
34. Strength and ductility of additively manufactured 310 austenitic stainless steel via wire-arc directed energy deposition: the role of columnar grain growth and ductility-dip cracking
35. Resistance of austenitic stainless steels to ductility-dip cracking: mechanisms10.29391/2021.100.026 ↗
36. 2012 · 1
37. Lippold · 2005 · 1 · 376
38. Ductility dip cracking mechanisms and characterization: a review10.1007/s10853-024-10112-w ↗
39. Hot cracking mechanism affecting a non-weldable Ni-based superalloy produced by selective electron beam melting10.1016/j.actamat.2017.09.047 ↗
40. Development of the strain-to-fracture test for evaluating ductility-dip cracking in austenitic stainless steels and Ni-base alloys10.1007/BF03263388 ↗
41. A comprehensive study on solidification (hot) cracking in austenitic stainless steel welds from a microstructural approach10.1016/j.ijpvp.2021.104560 ↗
42. Prevention of microcracking in dissimilar multipass welds of alloy 690 to type 316L stainless steel by Ce addition to filler metal10.1179/1362171811Y.0000000026 ↗
43. Dissimilar welding of duplex stainless steel with Ni alloys: a review
44. Effects of boron on the microstructure, ductility-dip-cracking, and tensile properties for NiCrFe-7 weld metal10.1016/j.jmst.2015.08.001 ↗
45. Effect of composition on ductility dip cracking of 690 nickel alloy during multipass welding
46. Multi-scale study of ductility-dip cracking in nickel-based alloy dissimilar metal weld10.1016/j.jmst.2018.10.023 ↗
47. Ductility dip cracking mechanism of Ni–Cr–Fe alloy based on grain boundary energy10.1179/1362171813Y.0000000113 ↗
48. Thermodynamic and Kinetic Approach to Ductility-Dip Cracking Resistance Improvement of Ni-base Alloy ERNiCrFe-7: Effect of Ti and Nb Additions
49. High temperature behavior of Ni-base weld metal: Part II – Insight into the mechanism for ductility dip cracking10.1016/j.msea.2004.03.075 ↗
50. Grain boundary sliding revisited: developments in sliding over four decades10.1007/s10853-006-6476-0 ↗
51. Effects of M23C6 on the high-temperature performance of Ni-based welding material NiCrFe-710.1007/s11661-014-2439-2 ↗
52. Metallurgical investigation into ductility dip cracking in Ni-based alloys: Part II
53. Statistical study of ductility-dip cracking induced plastic deformation in polycrystalline laser 3D printed Ni-based superalloy10.1038/s41598-017-03051-x ↗
54. An investigation of ductility-dip cracking in nickel-based weld metals - Part III
55. Transition-behavior of fatigue crack with variation of stress amplitude for SAF2205 steel: effect of dual-phase imbalance caused by welding
56. Cyclic deformation behavior and failure mechanism of S32205 duplex stainless steel under torsional fatigue loadings10.1016/j.msea.2020.139443 ↗
57. Role of δ-ferrite in fatigue crack growth of AISI 316 austenitic stainless steel10.1016/j.jmst.2021.10.008 ↗
58. Fatigue failure mechanism of duplex stainless steel welded joints including role of heterogeneous cyclic hardening/softening: Experimental and modeling10.1016/j.ijfatigue.2023.108010 ↗
59. A comparative assessment of fatigue deformation behavior of 316 LN SS at ambient and high temperature10.1016/j.msea.2017.04.102 ↗
60. Deformation behavior and recrystallization mechanism of a duplex stainless steel fabricated by laser powder bed fusion at high-temperature uniaxial tensile test10.1016/j.msea.2025.149153 ↗
61. Growth of short cracks during low and high cycle fatigue in a duplex stainless steel10.1016/j.ijfatigue.2012.01.010 ↗
62. On the cyclic softening behavior of SAF 2507 duplex stainless steel10.1016/j.actamat.2006.06.037 ↗
63. Effects of 100 ppb dissolved oxygen on low-cycle fatigue behaviors of 316LN austenitic stainless steel in borated and lithiated high temperature water and mechanism behind these effects10.1016/j.corsci.2020.108567 ↗
64. Role of TiN inclusion on corrosion fatigue behavior of Alloy 690 steam generator tubes in borated and lithiated high temperature water10.1016/j.corsci.2014.07.059 ↗
65. Diagnostic experimental results on the hydrogen embrittlement of austenitic steels10.1016/S1359-6454(02)00524-4 ↗
66. Hydrogen-enhanced localized plasticity—a mechanism for hydrogen-related fracture10.1016/0921-5093(94)90975-X ↗
67. Effects of dissolved hydrogen on corrosion fatigue crack growth behavior of 316LN stainless steel in high temperature pressurized water environment10.1016/j.corsci.2024.112041 ↗