Microstructure, mechanical behavior, and cavitation erosion-corrosion resistance of the BCC/B2 strengthened FeNiCrMoAl-based multi-principal element alloys
Source abstract
Abstract
The influence of disordered and ordered body-centered cubic (BCC-β and B2-β′) secondary phases on the mechanical properties and cavitation erosion-corrosion (CE-C) behavior of BCC/B2 strengthened FeNiCrMoAl-based multi-principal element alloy (MPEA) was systematically investigated. An increased β/β′ phases content enhanced the MPEAs’ strengths while maintaining good ductility. However, this increases also led to a higher proportion of loosely bound Al 2O 3 within the passivation film, resulting in a slight reduction in electrochemical corrosion performance. Remarkably, in a NaCl solution, the increased β/β′ phases significantly improved the MPEAs’ resistance to CE-C, attributed to the outstanding corrosion resistance and mechanical properties which could withstand elastic strain damage and plastic deformation.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · High Entropy Alloys Studies · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (72)
Show source-provided references
1. Why does seawater corrosion significantly inhibit the cavitation erosion damage of nickel-aluminum bronze?10.1016/j.corsci.2022.110700 ↗
2. Effect of seawater temperature on the corrosion and cavitation erosion-corrosion resistance of Al10Cr28Co28Ni34 high-entropy alloy coating10.1016/j.corsci.2024.111822 ↗
3. Cavitation erosion mechanism and microstructural design of pure titanium
4. Deformation-induced martensite in 304 stainless steel during cavitation erosion: effect on passive film stability and the interaction between cavitation erosion and corrosion10.1016/j.triboint.2021.107422 ↗
5. 3D flow simulation of a circular leading edge hydrofoil and assessment of cavitation erosion by the statistical evaluation of void collapses and cavitation structures10.1016/j.wear.2019.04.011 ↗
6. Study on transient characteristics and influencing of temperature on cavitation bubbles in various environments10.1016/j.ijleo.2019.01.076 ↗
7. Effect of compressive stress on cavitation erosion-corrosion behavior of nickel-aluminum bronze alloy10.1016/j.ultsonch.2022.106143 ↗
8. Franc · 2004
9. Exceptional combination of mechanical properties and cavitation erosion-corrosion resistance in a Fe23.7Co23.8Ni23.8Cr23.7Mo5 multi-principal element alloy10.1016/j.triboint.2024.109691 ↗
10. Analysis of mechanical and chemical mechanisms on cavitation erosion-corrosion of steels in salt water using electrochemical methods10.1016/j.triboint.2018.04.012 ↗
11. Cavitation erosion-corrosion behaviour of Fe-10Cr martensitic steel microalloyed with Zr in 3.5% NaCl solution10.1016/j.corsci.2021.109382 ↗
12. Development of high-strength Co-free high-entropy alloys hardened by nanosized precipitates10.1016/j.scriptamat.2018.01.028 ↗
13. Exceptional cavitation erosion-corrosion behavior of dual-phase bimodal structure in austenitic stainless steel10.1016/j.triboint.2019.01.018 ↗
14. Revealing the influence of zirconium content on the cavitation erosion-corrosion of a wear-resistant steel in sodium chloride solution10.1016/j.triboint.2023.108942 ↗
15. Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures10.1038/ncomms10602 ↗
16. Dieter · 1988
17. Enhancement of cavitation erosion resistance of 316 L stainless steel by adding molybdenum10.1016/j.ultsonch.2016.10.015 ↗
18. Electrochemical corrosion, hydrogen permeation and stress corrosion cracking behavior of E690 steel in thiosulfate-containing artificial seawater10.1016/j.corsci.2018.08.048 ↗
19. Comparison of cavitation erosion behaviors between the as-cast and friction stir processed Ni–Al bronze in distilled water and artificial seawater10.1016/j.jmrt.2021.05.015 ↗
20. Corrosion properties of nickel-aluminium bronze in natural seawater—effect of galvanic coupling to UNS S3160310.1016/j.corsci.2017.03.016 ↗
21. Enhancing mechanical properties and corrosion resistance of nickel-aluminum bronze via hot rolling process10.1016/j.jmst.2020.05.024 ↗
22. Enhanced fatigue resistance and fatigue-induced substructures in an additively manufactured CoCrNi medium-entropy alloy treated by ultrasonic surface rolling process10.1016/j.ijplas.2023.103721 ↗
23. Exceptional strength-ductility combination of additively manufactured high-entropy alloy matrix composites reinforced with TiC nanoparticles at room and cryogenic temperatures
24. Size effects on the mechanical properties of nanocrystalline NbMoTaW refractory high entropy alloy thin films10.1016/j.ijplas.2017.04.013 ↗
25. Realizing good combinations of strength-ductility and corrosion resistance in a Co-free Fe4Ni4Mn2CrTi high-entropy alloy via tailoring Ni/Ti-rich precipitates and heterogeneous structure10.1016/j.msea.2023.145223 ↗
26. Potential TRIP/TWIP coupled effects in equiatomic CrCoNi medium-entropy alloy10.1016/j.actamat.2022.118049 ↗
27. Microwave synthesized complex concentrated alloy coatings: plausible solution to cavitation induced erosion-corrosion10.1016/j.ultsonch.2018.09.004 ↗
28. Porosity modeling in a TiNbTaZrMo high-entropy alloy for biomedical applications10.1039/D3RA07313K ↗
29. Origin of superior low-cycle fatigue resistance of an interstitial metastable high-entropy alloy10.1016/j.jmst.2021.10.010 ↗
30. Exceptionally high cavitation erosion and corrosion resistance of a high entropy alloy10.1016/j.ultsonch.2017.09.044 ↗
31. Influences of thermomechanical processing by severe cold and warm rolling on the microstructure, texture, and mechanical properties of an equiatomic CoCrNi medium-entropy alloy10.1007/s11665-021-06092-6 ↗
32. Heterogeneous precipitation behavior and stacking-faultmediated deformation in a CoCrNi-based medium-entropy alloy10.1016/j.actamat.2017.07.029 ↗
33. Exceptional strength-ductility synergy at room and liquid nitrogen temperatures of Al7.5Co20.5Fe24Ni24Cr24 high-entropy alloy with hierarchical precipitate heterogeneous structure10.1016/j.ijplas.2024.103939 ↗
34. Corrosion-resistant L12-strengthened high-entropy alloy with high strength and large ductility10.1016/j.corsci.2023.111593 ↗
35. A new CrFeNi2Al eutectic high entropy alloy system with excellent mechanical properties10.1016/j.jallcom.2018.08.176 ↗
36. Enhancing the strength of AlCrFeNi HEAs via tailoring aluminum content and optimal aging treatment10.1016/j.jallcom.2021.162242 ↗
37. Remarkable improved strength and ductility in brittle eutectic high-entropy alloy via a novel spheroidization and recrystallization strategy10.1016/j.jmst.2023.11.050 ↗
38. Directly cast bulk eutectic and near-eutectic high entropy alloys with balanced strength and ductility in a wide temperature range10.1016/j.actamat.2016.11.016 ↗
39. Cooperative effect of Cr and Al elements on passivation enhancement of eutectic high-entropy alloy AlCoCrFeNi2.1 with precipitates10.1016/j.jmst.2022.07.023 ↗
40. Influence of partial substitution of Cr by Al on microstructure and mechanical behavior of Fe30Ni35Cr35 multi-principal element alloy10.1016/j.vacuum.2023.112282 ↗
41. Effect of the local chemical environment on oxidation resistance mechanisms in AlNbTiZr refractory high entropy alloys: a first-principles study10.1016/j.scriptamat.2022.114624 ↗
42. Effect of local chemical environment on the point defects in AlNbTiZr refractory high entropy alloys10.1016/j.jnucmat.2023.154451 ↗
43. Corrosion resistance enhancement of CoCrFeMnNi high-entropy alloy fabricated by additive manufacturing10.1016/j.corsci.2020.108954 ↗
44. Effect of roughness on general corrosion and pitting of (FeCoCrNi)0.89(WC)0.11 high-entropy alloy composite in 3.5 wt% NaCl solution10.1016/j.corsci.2018.10.025 ↗
45. Graphical analysis of electrochemical impedance spectroscopy data in Bode and Nyquist representations10.1016/j.jpowsour.2016.01.073 ↗
46. Corrosion behavior and passive film characteristics of AlNbTiZrSix high-entropy alloys in simulated seawater environment10.1016/j.corsci.2023.111530 ↗
47. Corrosion behaviour of 316L stainless steel and anti-corrosion materials in a high acidified chloride solution10.1016/j.apsusc.2014.09.205 ↗
48. The accurate use of impedance analysis for the study of microbial electrochemical systems10.1039/c2cs35026b ↗
49. Effect of annealing temperatures on microstructural evolution and corrosion behavior of Ti-Mo titanium alloy in hydrochloric acid10.1016/j.corsci.2021.110079 ↗
50. Concerning the conversion of the constant phase element parameter Y0 into a capacitance10.5006/1.3280607 ↗
51. The analysis of electrode impedances complicated by the presence of a constant phase element10.1016/S0022-0728(84)80324-1 ↗
52. Determination of effective capacitance and film thickness from constant-phaseelement parameters10.1016/j.electacta.2009.10.065 ↗
53. Dielectric properties of materials showing constant-phase-element (CPE) impedance response10.1149/2.033306jes ↗
54. Corrosion and passive behavior of AlxCrFeNi3-x (x= 0.6, 0.8, 1.0) eutectic high entropy alloys in chloride environment10.1016/j.corsci.2022.110666 ↗
55. Corrosion resistant nanostructured eutectic high entropy alloy10.1016/j.corsci.2019.108315 ↗
56. Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Cr, Mn, Fe, Co and Ni10.1016/j.apsusc.2010.10.051 ↗
57. The corrosion behavior and film properties of Alcontaining high-entropy alloys in acidic solutions10.1016/j.apsusc.2021.149854 ↗
58. Corrosion behavior of an equiatomic CoCrFeMnNi high-entropy alloy compared with 304 stainless steel in sulfuric acid solution10.1016/j.corsci.2018.02.031 ↗
59. Effect of Zr on phase separation, mechanical and corrosion behavior of heterogeneous CoCrFeNiZrx high-entropy alloy10.1016/j.jmst.2021.08.062 ↗
60. Microbiologically influenced corrosion of FeCoCrNiMo0.1 high-entropy alloys by marine Pseudomonas aeruginosa10.1016/j.corsci.2019.108390 ↗
61. A non-equiatomic FeNiCoCr high-entropy alloy with excellent anti-corrosion performance and strength-ductility synergy10.1016/j.corsci.2021.109341 ↗
62. Microstructural evolution, electrochemical and corrosion properties of AlxCoCrFeNiTiy high entropy alloys10.1016/j.matdes.2019.107698 ↗
63. Influence of carbon on the corrosion behaviour of interstitial equiatomic CoCrFeMnNi high-entropy alloys in a chlorinated concrete solution10.1016/j.corsci.2019.108287 ↗
64. Microstructure and corrosion resistance properties of (FeCoNi)86Al7Ti7 high-entropy alloy via different aging time10.1016/j.corsci.2023.111670 ↗
65. High-throughput synthesis and corrosion behavior of sputter-deposited nanocrystalline Alx (CoCrFeNi)100-x combinatorial high-entropy alloys10.1016/j.matdes.2020.109018 ↗
66. Effect of cold deformation on corrosion behavior of selective laser melted 316L stainless steel bipolar plates in a simulated environment for proton exchange membrane fuel cells10.1016/j.corsci.2022.110257 ↗
67. Anodic oxide films on aluminum10.1021/cr60259a005 ↗
68. Passivity breakdown, pit initiation and propagation of pits in metallic materials–review10.1016/j.corsci.2014.10.006 ↗
69. Homogenization of AlxCoCrFeNi high-entropy alloys with improved corrosion resistance10.1016/j.corsci.2018.01.030 ↗
70. Effect of alloying elements on the electrochemical polarization behavior and passive film of Fe–Mn base alloys in various aqueous solutions10.1016/j.corsci.2003.09.002 ↗
71. Tailoring microstructure and corrosion behavior of CoNiVAlx medium entropy alloys via Al addition10.1016/j.corsci.2022.110570 ↗
72. Microstructure and corrosion behavior of FeCrNiCoMnx (x = 1.0, 0.6, 0.3, 0) high entropy alloys in 0.5 M H2SO410.1016/j.corsci.2021.109694 ↗