Stress corrosion cracking behavior at fusion boundary of cold worked 316LN stainless steel/Inconel 52 M weld joint in simulated primary water environment
Source abstract
Abstract
The microstructure of the fusion boundary (FB) for cold worked (CW) 316LN stainless steel/Inconel 52 M weld joint (20 % CW 316LN/52M-FB) was investigated. The FB region was subjected to stress corrosion crack growth rate (SCCGR) test in simulated primary water of pressurized water reactor (PWR). It was noticed that stress corrosion cracking (SCC) occurred both along the FB and in the nearby 316LN region. The propagation of secondary cracks was impeded in the 52 M region rich in the Cr and Ni. Under similar conditions, the SCCGR of 20 % CW 316LN/52M-FB was five to six times higher compared with 316 L/52M-FB without CW.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. Microstructure and stress corrosion cracking behavior of the weld metal in alloy 52-A508 dissimilar welds10.2320/matertrans.M2010294 ↗
2. Stress corrosion cracking of a low alloy steel to stainless steel transition weld in PWR primary waters at 292°C10.1016/S0010-938X(99)00131-6 ↗
3. Stress corrosion cracking of fusion boundary for 316L/52M dissimilar metal weld joints in borated and lithiated high temperature water10.1016/j.corsci.2017.01.024 ↗
4. A review of stress corrosion cracking of austenitic stainless steels in PWR primary water10.1016/j.jnucmat.2023.154815 ↗
5. T. Saukkonen, M. Aalto, I. Virkkunen, U. Ehrnstén, H. HnninenPlastic strain and residual stress distributions in an AISI 304 stainless steel BWR pipe weld, 15th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, 2011, https://doi.org/10.1007/978-3-319-48760-1_142.10.1007/978-3-319-48760-1_142 ↗
6. Role of water chemistry and microstructure in stress corrosion cracking in the fusion boundary region of an Alloy 182-A533B low alloy steel dissimilar weld joint in high temperature water10.1016/j.corsci.2011.08.046 ↗
7. Deformation processes during tensile straining of ultrafine/nanograined structures formed by reversion in metastable austenitic steels10.1016/j.scriptamat.2008.02.028 ↗
8. SCC crack growth rate of cold worked 316L stainless steel in PWR environment10.1016/j.jnucmat.2014.09.054 ↗
9. Oxidation and deformation behaviours of the 316l stainless-steel weldments in nuclear plants10.20964/2020.03.69 ↗
10. Effect of cold deformation on the stress corrosion cracking resistance of a high-strength stainless steel10.1007/s10853-022-07866-6 ↗
11. Microstructure, local mechanical properties and stress corrosion cracking susceptibility of an SA508–52 M-316LN safe-end dissimilar metal weld joint by GTAW10.1016/j.msea.2016.05.101 ↗
12. Microstructure of a domestically fabricated dissimilar metal weld joint (SA508–52 M-309L-CF8A) in nuclear power plant10.1016/j.matchar.2018.12.011 ↗
13. A. E647–15, Standard Test Method for Measurement of Fatigue Crack growth Rates, ASTM International (West Conshohocken) PA19428–2959..
14. Stress corrosion cracking of 316L HAZ for 316L stainless steel/Inconel 52M dissimilar metal weld joint in simulated primary water10.1016/j.corsci.2016.07.031 ↗
15. Effect of temperature and loading mode on environmentally assisted crack growth of a forged 316L SS in oxygenated high-temperature water10.1016/j.corsci.2014.06.035 ↗
16. High-pressure corrosion fatigue experiments employing diverse methodologies for assessing rates of crack propagation10.1016/j.jmrt.2024.07.058 ↗
17. IGSCC of non-sensitized stainless steels in high temperature water10.1016/j.jnucmat.2008.08.005 ↗
18. A. E399, Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials, (2023).
19. SCC growth behaviors of austenitic stainless steels in simulated PWR primary water10.1016/j.jnucmat.2012.03.013 ↗
20. Dissimilar welding of AISI 310 austenitic stainless steel to nickel-based alloy Inconel 65710.1016/j.jmatprotec.2008.08.019 ↗
21. Microstructure, local mechanical properties and stress corrosion cracking susceptibility of an SA508–52 M-316LN safe-end dissimilar metal weld joint by GTAW10.1016/j.msea.2016.05.101 ↗
22. Effect of cold work on the stress corrosion cracking behavior of Alloy 690 in supercritical water environment10.1016/j.jnucmat.2017.10.003 ↗
23. Linking grain boundary microstructure to stress corrosion cracking of cold-rolled alloy 690 in pressurized water reactor primary water10.5006/0808 ↗
24. Stress Corrosion Crack Growth Rate Testing of Novel Composite Arrest Specimens
25. Influence of later-dissolved oxygen on microstructural changes in oxide films formed on Alloy 690TT in hydrogenated primary water10.1016/j.corsci.2015.02.003 ↗
26. P.L. Andresen, L.M. Young, Characterization of the roles of electrochemistry, convection and crack chemistry in stress corrosion cracking, 1995.
27. S. Hettiarachchi, G.P. Wozadlo, P.L. Andresen, T.P. Diaz, R.L.I. Cowan, The concept of noble metal chemical addition technology for IGSCC mitigation of structural materials, 1995.
28. P.L. Andresen, M.M. Morra, W.R. Catlin, Effects of Yield Strength, Corrosion Potential, Composition and Stress Intensity Factor in SCC of Stainless Steels, Corrosion (2004).
29. T. Shoji, Progress in the Mechanistic Understanding of BWR SCC and Its Implication to the Prediction of SCC Growth Behavior in Plants, Proc. 11^ Int. Symp. on Environmental Degradation of Materials in Nuclear Power System-Water Reactors, Washington, USA, Aug. 10-14, 2003 (2003).
30. Effect of martensite and hydrogen on SCC of stainless steels and alloy
31. Effects of temperature on crack growth rate in sensitized type 304 stainless steel and alloy 60010.5006/1.3316104 ↗
32. Cold work and temperature dependence of stress corrosion crack growth of austenitic stainless steels in hydrogenated and oxygenated high-temperature water10.5006/1.3278329 ↗
33. Primary water stress corrosion cracking inspection ranking scheme for alloy 600 components10.1016/S0029-5493(97)00346-4 ↗
34. Some fundamental aspects of thermally activated processes involved in stress corrosion cracking in high temperature aqueous environments10.1016/j.jnucmat.2008.08.051 ↗
35. Effect of temperature on the passive film structure and corrosion performance of CoCrFeMoNi high-entropy alloy10.1016/j.corsci.2022.110661 ↗
36. Unveiling the effect of hydrostatic pressure on the passive films of the deformed titanium alloy10.1016/j.corsci.2021.109705 ↗
37. Electrochemical properties and growth mechanism of passive films on Alloy 690 in high-temperature alkaline environments10.1016/j.corsci.2010.06.016 ↗
38. Effect of dissolved oxygen and hydrogen on the stress corrosion cracking behavior of alloy 600 in high temperature water10.1016/j.jnucmat.2020.152603 ↗
39. Mechanistic understanding of the temperature dependence of crack growth rate in alloy 600 and 316 stainless steel through high-resolution characterization10.1016/j.actamat.2018.11.039 ↗
40. X. Li, J. Wang, E.H. Han, W. Ke, Corrosion behavior for Alloy 690 and Alloy 800 tubes in simulated primary water, Corrosion Science: The Journal on Environmental Degradation of Materials and its Control (Feb.) (2013) 67, https://doi.org/10.1016/j.corsci.2010.06.016.10.1016/j.corsci.2012.10.018 ↗
41. Emerging issues and fundamental processes in environmental cracking in hot water (Reprinted from Proceedings of the CORROSION/2007 research topical symposium "Advances in Environmentally Assisted Cracking", 2007)10.5006/1.3278483 ↗
42. P.L. Andresen, Factors Influencing SCC and IASCC of Stainless Steels in High Temperature Water, (2004), 185-197, https://doi.org/10.1115/PVP2004-2663.10.1115/PVP2004-2663 ↗
43. Comparison of corrosion resistance of UNS N06690TT and UNS N08800SN in simulated primary water with various concentrations of dissolved oxygen10.5006/1167 ↗
44. Effect of dissolved oxygen content on stress corrosion cracking of a cold worked 316L stainless steel in simulated pressurized water reactor primary water environment10.1016/j.jnucmat.2013.11.027 ↗
45. Insight into the acceleration in oxidation kinetics ahead of stress corrosion crack of alloy 690 in simulated PWR primary water10.1016/j.corsci.2020.108943 ↗
46. Rapid nickel diffusion in cold-worked type 316 austenitic steel at 360–500 °C10.3139/146.111542 ↗
47. Acceleration of nickel diffusion by high tensile stress in cold-worked type 316 stainless steel at 450°C10.1080/14786435.2018.1495852 ↗
48. Dependence of crack growth kinetics on dendrite orientation and water chemistry for Alloy 182 weld metal in high-temperature water10.1016/j.jnucmat.2014.12.083 ↗
49. Quantitative prediction of environmentally assisted cracking
50. Life prediction by mechanistic modeling and system monitoring of environmental cracking of iron and nickel alloys in aqueous systems10.1016/0025-5416(88)90564-2 ↗
51. P.L. Andresen, P.W. Emigh, M.M. Morra, Effects of PWR Primary Water Chemistry and Deaerated Water on SCC, Corrosion (2005).
52. Effects of chloride and oxygen on stress corrosion cracking of cold worked 316/316L austenitic stainless steel in high temperature water10.1016/j.corsci.2016.04.035 ↗
53. Corrosion and environmentally-assisted cracking of carbon and low-alloy steels
54. Stress corrosion cracking behavior of dissimilar metal weldments in high temperature water environments
55. Passivity breakdown and stress corrosion cracking of stainless steel10.1016/j.corsci.2006.05.031 ↗
56. Effect of sulphate and chloride ions on the crevice chemistry and stress corrosion cracking of alloy 600 in high temperature aqueous solutions10.1016/0010-938X(92)90016-V ↗
57. Effects of hydrogen on stress corrosion crack growth rate of nickel alloys in high-temperature water10.5006/1.3278508 ↗
58. Effect of chloride on environmentally assisted cracking of low alloy steels in oxygenated high-temperature water — general corrosion
59. Stress corrosion cracking behavior of cold-drawn 316 austenitic stainless steels in simulated PWR environment10.1016/j.corsci.2016.08.014 ↗
60. The cleavage strength of polycrystals
61. A model of extrusions and intrusions in fatigued metals I. Point-defect production and the growth of extrusions10.1080/01418618108239541 ↗
62. A review on the fatigue cracking of twin boundaries: Crystallographic orientation and stacking fault energy10.1016/j.pmatsci.2022.101011 ↗
63. Multi-scale characterization of stress corrosion cracking of cold-worked stainless steels and the influence of Cr content10.1016/j.actamat.2009.07.040 ↗
64. Theory of the formation of lattice defects during plastic strain10.1016/0001-6160(55)90109-7 ↗
65. Formulating stress corrosion cracking growth rates by combination of crack tip mechanics and crack tip oxidation kinetics10.1016/j.corsci.2009.10.041 ↗
66. Insights into the stress corrosion cracking propagation behavior of Alloy 690 and 316 L stainless steel in KOH versus LiOH oxygenated water10.1016/j.corsci.2023.111556 ↗
67. Effects of cold working degrees on grain boundary characters and strain concentration at grain boundaries in Alloy 60010.1016/j.corsci.2010.11.022 ↗
68. Effect of deformation level and orientation on SCC of 316L stainless steel in simulated light water environments