Influence of protein migration on the fretting-corrosion behavior of 316 L stainless steel with artificial crevices
Source abstract
Abstract
Fretting-crevice-corrosion at the modular interface of artificial joints can cause failure of the joint replacement. In this study, long-term fretting crevice corrosion tests of 316 L stainless steel were carried out at the center of an artificial crevice in a saline solution with and without proteins. The results showed that fretting initiated significant crevice corrosion without proteins and corrosion of large areas was observed in the non-contact area inside the crevice. In the presence of proteins, proteins can migrate into the crevice and block the crevice mouth. The enriched proteins had a lubricating effect and inhibited the occurrence of crevice corrosion.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical stress and fatigue analysis · Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Biomaterials in orthopaedics10.1098/rsif.2008.0151 ↗
2. Failures in stainless steel orthopaedic implant devices: a survey10.1007/BF00592147 ↗
3. Fretting corrosion accelerates crevice corrosion of modular hip tapers10.1002/jab.770060104 ↗
4. In vitro fretting crevice corrosion damage of CoCrMo alloys in phosphate buffered saline: debris generation, chemistry and distribution10.1016/j.actbio.2020.07.052 ↗
5. Long-term results of bipolar hemiarthroplasty for osteoarthritis of the hip and idiopathic osteonecrosis of the femoral head10.1007/s00776-008-1238-2 ↗
6. Titanium, chromium and cobalt ions modulate the release of bone-associated cytokines by human monocytes/macrophages in vitro10.1016/0142-9612(96)00072-5 ↗
7. MRI, Retrieval analysis, and histologic evaluation of adverse local tissue reaction in metal-on-polyethylene total hip arthroplasty10.1016/j.arth.2016.11.046 ↗
8. Adverse reactions to metal on polyethylene implants: highly destructive lesions related to elevated concentration of cobalt and chromium in synovial fluid10.1002/jbm.a.36057 ↗
9. Fretting-corrosion of materials used as orthopaedic implants10.1016/j.wear.2004.11.027 ↗
10. A finite element study on the mechanical response of the head-neck interface of hip implants under realistic forces and moments of daily activities: part 1, level walking10.1016/j.jmbbm.2017.08.012 ↗
11. Influence of molybdate ion and pH on the fretting corrosion of a CoCrMo—titanium alloy couple10.1016/j.biotri.2017.05.002 ↗
12. Fretting initiated crevice corrosion of 316LVM stainless steel in physiological phosphate buffered saline: potential and cycles to initiation10.1016/j.actbio.2019.07.051 ↗
13. A peridynamic model for crevice corrosion damage10.1016/j.electacta.2021.139512 ↗
14. Initiation modeling of crevice corrosion in 316L stainless steels10.1016/S0924-0136(00)00462-3 ↗
15. Microscopic and local probe method for studying crevice corrosion and its application to iron and stainless steel10.1016/0010-938X(93)90215-3 ↗
16. The initial potential and current distributions of the crevice corrosion process10.1149/1.2056139 ↗
17. In situ monitoring of crevice corrosion morphology of Type 316L stainless steel and repassivation behavior induced by sulfate ions10.1016/j.corsci.2017.08.005 ↗
18. Crevice corrosion behaviors of CoCrMo alloy and stainless steel 316L artificial joint materials in physiological saline10.1016/j.corsci.2021.110075 ↗
19. The influence of the crevice induced IR drop on polarization measurement of localized corrosion behavior of 316L stainless steel10.1016/j.corsci.2019.04.030 ↗
20. Crevice corrosion of stainless steels in sodium chloride solution10.1016/0010-938X(78)90030-6 ↗
21. The evolution of subsurface micro-structure and tribo-chemical processes in cocrmo-ti6al4v fretting-corrosion contacts: What lies at and below the surface?10.1016/j.wear.2019.203095 ↗
22. Fretting-corrosion behavior in hip implant modular junctions: the influence of friction energy and pH variation10.1016/j.jmbbm.2016.05.024 ↗
23. The influence of proteins on the fretting–corrosion behaviour of a Ti6Al4V alloy10.1016/j.wear.2006.03.032 ↗
24. Micro asperity-based fretting corrosion of CoCrMo, Ti-6Al-4V, and 316L SS: assessment of an electrochemical and micro-mechanical model10.1016/j.triboint.2023.108222 ↗
25. Micro-asperity tribocorrosion of CoCrMo, Ti6Al4V, and 316 stainless steel in air and physiological solution: small scale reciprocal sliding of a single diamond tip10.1016/j.wear.2022.204332 ↗
26. Compliant interfaces and fretting corrosion of modular taper junctions in total hip implants: the micromechanics of contact10.1016/j.triboint.2020.106437 ↗
27. Interfacial compliance, energy dissipation, frequency effects, and long-term fretting corrosion performance of Ti-6Al-4V/CoCrMo interfaces10.1002/jbm.a.37299 ↗
28. Fretting crevice corrosion of 316 L stainless steel in physiological phosphate buffered saline: load, potential and alloy counterface effects10.1016/j.triboint.2021.107198 ↗
29. Fretting initiated crevice corrosion of 316LVM stainless steel in physiological phosphate buffered saline: potential and cycles to initiation10.1016/j.actbio.2019.07.051 ↗
30. Study of fretting-initiated crevice corrosion and crevice corrosion affected fretting of stainless steel10.1016/j.corsci.2023.111586 ↗
31. Effect of metal ions on BSA adsorption and tribofilm formation10.1007/s11249-023-01721-8 ↗
32. Raman analysis of chemisorbed tribofilm for metal-on-polyethylene hip joint prostheses10.1049/bsb2.12008 ↗
33. Analysis of chemisorbed tribo-film for ceramic-on-ceramic hip joint prostheses by Raman spectroscopy10.3390/jfb12020029 ↗
34. The composition of tribofilms produced on metal-on-metal hip bearings10.1016/j.biomaterials.2013.11.065 ↗
35. Study of the tribocorrosion behaviors of albumin on a cobalt-based alloy using scanning Kelvin probe force microscopy and atomic force microscopy10.1016/j.elecom.2016.01.015 ↗
36. Biotribocorrosion of CoCrMo orthopaedic implant materials assessing the formation and effect of the biofilm10.1016/j.triboint.2007.02.019 ↗
37. Tribolayer formation in a metal-on-metal (MOM) hip joint: an elcterochemical investigation10.1016/j.jmbbm.2013.08.018 ↗
38. A synergistic effect of albumin and H2O2accelerates corrosion of Ti6Al4V10.1016/j.actbio.2015.07.046 ↗
39. Moderated crevice corrosion susceptibility of Ti6Al4V implant material due to albumin-corrosion interaction10.1016/j.jmst.2021.09.006 ↗
40. Role of protein in crevice corrosion of CoCrMo alloy: an investigation using wire beam electrodes10.1016/j.corsci.2023.111028 ↗
41. Fretting-corrosion between 316L SS and PMMA: Influence of ionic strength, protein and electrochemical conditions on material wear. Application to orthopaedic implants10.1016/j.wear.2011.01.082 ↗
42. Fretting corrosion with proteins: the role of organic coating on the synergistic mechanisms10.1016/j.tsf.2012.09.095 ↗
43. The role of fretting-frequency on the damage modes of THR modular junction: in-vitro study10.1016/j.msec.2021.112128 ↗
44. On the mechanisms of various fretting wear modes10.1016/j.triboint.2011.02.010 ↗
45. Analysis of sliding behaviour for fretting loadings: determination of ransition criteria10.1016/0043-1648(94)06582-9 ↗
46. Wear analysis in fretting of hard coatings through a dissipated energy concept10.1016/S0043-1648(96)07436-4 ↗
47. Wear damage of Alloy 690TT in partial and gross slip fretting regimes at high temperature10.1016/j.wear.2017.07.006 ↗
48. Graphitic tribological layers in metal-on-metal hip replacements10.1126/science.1213902 ↗