journal article·2022-12

Effect of volatile silicon species on chromia scale microstructures

Thuan Dinh Nguyen, Jianqiang Zhang, David J. Young

Corrosion Science· Volume 209
Publisher page

Abstract

High temperature corrosion by chlorides and siloxanes, common impurities in waste incinerators, was investigated. A model alloy Fe-30Cr (wt%) exposed to Ar-10 H 2O and Ar-10 H 2O-0.1HCl mixtures (vol%) at 650 °C formed protective Cr 2O 3 scales. Contaminating the reaction gases by siloxanes resulted in an amorphous (Cr,Si)O x scale layer in Ar-10 H 2 O-0.1HCl and a polycrystalline, Si-rich Cr 2O 3 scale in Ar-10 H 2 O. Mass transfer calculation showed the feasibility of Si supply from the vaporisation of siloxanes. The co-effect of HCl and siloxanes on amorphous oxide scale formation is discussed based on oxidation of co-deposited volatile Cr and Si species.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Advanced ceramic materials synthesis · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Waste incineration plants in the FRG: construction, materials, investigation on cases of corrosion10.1002/maco.19890400303 ↗
2. Corrosion resistance of high temperature alloys in gas containing hydrogen chloride10.1179/mst.1990.6.4.364 ↗
3. The role of alloying elements in commercial alloys for corrosion resistance in oxidizing-chloridizing atmospheres Part II: experimental investigations10.1002/maco.200303673 ↗
4. Behaviour of S31400 and S32205 steels in HCl- and H2S-containing gas atmospheres under a low oxygen partial pressure between 480 and 680 °C10.1002/maco.201709992 ↗
5. High temperature corrosion mechanisms and effect of alloying elements for materials used in waste incineration environment10.1016/S0010-938X(01)00058-0 ↗
6. Effect of hydrogen chloride on corrosion behaviour of Fe–Cr alloys in wet CO2 Gas at 650 °C10.1007/s11085-020-09978-3 ↗
7. Effect of silicon on corrosion of Fe-20Cr and Fe-20Cr-20Ni alloys in wet CO2 with and without HCl at 650 °C10.1016/j.corsci.2020.109096 ↗
8. Silicon contamination during alloy oxidation in water vapour at 650 °C10.1007/s11085-022-10108-4 ↗
9. M. Turco, A. Ausiello, L. Micoli, Treatment of Biogas for Feeding High Temperature Fuel Cells: Removal of Harmful Compounds by Adsorption Processes, Springer International Publishing, Switzerland, 2016.10.1007/978-3-319-03215-3 ↗
10. Solid oxide fuel cell anode degradation by the effect of siloxanes10.1016/j.jpowsour.2015.01.053 ↗
11. Vaporization of silica in steam atmosphere10.1111/j.1151-2916.1979.tb12739.x ↗
12. Mass spectrometric identification of Si-O-H (g) species from the reaction of silica with water vapour at atmospheric pressure10.1111/j.1151-2916.1997.tb02935.x ↗
13. Perry · 1997
14. Moulder · 1992
15. XPS studies on SiOx thin films10.1016/0169-4332(93)90431-A ↗
16. Atom probe study of impurity segregation at grain boundaries in chromia scales grown in CO2 gas10.1016/j.corsci.2017.12.024 ↗
17. Phase equilibria in the system Cr2O3-SiO210.6028/jres.005.021 ↗
18. Barin · 1995
19. Theoretical study of the thermochemistry of molecules in the Si-O-H system10.1021/j100041a052 ↗
20. Effect of oxide grain structure on the high-temperature oxidation of Cr10.1007/BF00611694 ↗
21. The growth and structure of oxide films formed on single crystal (100) and polycrystalline Cr between 550 and 900°C10.1002/maco.19870381005 ↗
22. 〈https://www.silitech.ch/wp-content/uploads/2021/03/32.pdf〉.
23. Vapor pressure-viscosity relations in methylpolysiloxanes10.1021/ja01208a050 ↗
24. Organosilicon polymers. II. The open chain dimethylsiloxanes with trimethylsiloxy end groups10.1021/ja01215a048 ↗
25. Hydrolysis of polydimethylsiloxane fluids in controlled aqueous solutions10.2166/wst.2013.308 ↗
26. Phase equilibria in the systems TiO2, TiO2-SiO2 and TiO2-Al2O310.6028/jres.011.049 ↗
27. Growth of amorphous Ti–Si–O thin films by aerosol CVD process at atmospheric pressure10.1149/1.2806790 ↗
28. The thermodynamic stability of amorphous oxide overgrowths on metals10.1016/j.actamat.2007.10.023 ↗
29. 〈https://archpdfs.lps.org/Chemicals/HighVacuumGrease.pdf〉.